[asterisk-dev] PJSIP transport problem

[Steve Murphy]

I am puzzled, perhaps you, oh wise ones, can
set me straight...

Why can I not have these two entries in my pjsip.conf file?

[transport-udp-nat]
type=transport
protocol=udp
bind=0.0.0.0:5060
local_net=10.0.10.0/24
external_media_address=90.194.253.241
external_signaling_address=90.194.253.241
external_signaling_port=5060

[transport-udp-nat-other]
type=transport
protocol=udp
bind=0.0.0.0:5060
local_net=10.1.0.0/24
external_media_address=120.178.24.130120.178.24.130
external_signaling_address=120.178.24.130120.178.24.130
external_signaling_port=5060      ; External port for SIP signalling
(default:

This is in yesterday's trunk release.

murf

-- 

Steve Murphy
ParseTree Corporation
57 Lane 17
Cody, WY 82414
✉  murf at parsetree dot com
☎ 307-899-5535307-899-5535


Call
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype
Call
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20140228/3514338c/attachment.html>