[asterisk-dev] [Code Review] Allow R/W of pickupgroup channel variable.

[rmudgett]

-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
https://reviewboard.asterisk.org/r/1148/#review3616
-----------------------------------------------------------

Ship it!


Should do the job.  Just looked at the diff and compared it to the related callgroup right next to it in the code.

- rmudgett


On 2011-05-25 10:13:45, irroot wrote:
> 
> -----------------------------------------------------------
> This is an automatically generated e-mail. To reply, visit:
> https://reviewboard.asterisk.org/r/1148/
> -----------------------------------------------------------
> 
> (Updated 2011-05-25 10:13:45)
> 
> 
> Review request for Asterisk Developers.
> 
> 
> Summary
> -------
> 
> At first glance this is not needed but there is a application for it.
> 
> i have a large site that uses asterisk for all connections to trunks the existing legacy PBX is been phased out
> as it has no spares or capacity.
> 
> in the dialplan i want to allow call pickup if a call comes in on the DAHDI ports to the PBX i want to set the pickup group from
> the real time database and then run the pickup application this can be done with pickup mark this is not ideal as the SIP phones are using
> pickupgroup/changroup settings.
> 
> small change to allow reading / setting pickupgroup to help transition.
> 
> Greg 
> 
> 
> This addresses bug 19045.
>     https://issues.asterisk.org/view.php?id=19045
> 
> 
> Diffs
> -----
> 
>   /trunk/funcs/func_channel.c 311674 
> 
> Diff: https://reviewboard.asterisk.org/r/1148/diff
> 
> 
> Testing
> -------
> 
> 
> Thanks,
> 
> irroot
> 
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20110525/f104c67f/attachment.htm>