[asterisk-dev] [Code Review] Allow R/W of pickupgroup channel variable.

[irroot]

-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
https://reviewboard.asterisk.org/r/1148/
-----------------------------------------------------------

(Updated 2011-05-25 10:13:45.026734)


Review request for Asterisk Developers.


Changes
-------

Setting the bug ID ... this is quite trivial any takers ??


Summary
-------

At first glance this is not needed but there is a application for it.

i have a large site that uses asterisk for all connections to trunks the existing legacy PBX is been phased out
as it has no spares or capacity.

in the dialplan i want to allow call pickup if a call comes in on the DAHDI ports to the PBX i want to set the pickup group from
the real time database and then run the pickup application this can be done with pickup mark this is not ideal as the SIP phones are using
pickupgroup/changroup settings.

small change to allow reading / setting pickupgroup to help transition.

Greg 


This addresses bug 19045.
    https://issues.asterisk.org/view.php?id=19045


Diffs
-----

  /trunk/funcs/func_channel.c 311674 

Diff: https://reviewboard.asterisk.org/r/1148/diff


Testing
-------


Thanks,

irroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20110525/470cdb9c/attachment-0001.htm>