[asterisk-dev] SendText() on a SIP channel in 1.8 ?

[Russell Bryant]

----- Original Message -----
> Hi!
> I'm adopting my PBX for Asterisk 1.8. I've found that I can't see
> messages
> sent to the SIP phones anymore.
> I've done just a basic debug: The SendText() app is called and
> ${SENDTEXTSTATUS} shows SUCCESS. However, there is no output on the
> phone
> and I cannot see a MESSAGE SIP method being sent to the phone. With
> sip debug
> enabled, I cannot see any chan_sip activity around the SendText()
> call. In 1.6,
> it works normally.
> Should I make some additional setup somewhere ? The phones are for
> example
> Linksys/Cisco SPA962 or SPA942.
> With regards, Pavel.

It sounds like a bug to me.  If that's the case, it sounds like it would be easy to reproduce.  Please open a report on issues.asterisk.org.

--
Russell Bryant
Digium, Inc.  |  Engineering Manager, Open Source Software
445 Jan Davis Drive NW   -    Huntsville, AL 35806  -  USA
jabber: rbryant at digium.com    -=-    skype: russell-bryant
www.digium.com -=- www.asterisk.org -=- blogs.asterisk.org