[asterisk-dev] IAX hardphone

[Mark Murawski]

I don't know anything about the iax protocol, but posting the raw 
wireshark output to your website would help others figure out what's 
going on.

On 02/10/11 15:06, Bill Shaw wrote:
>
> OK. First, my setup...
>
> 192.168.1.56 - my development system - Win xp - Wireshark, Zoiper, TI's
> Code Composer Studio
> 192.168.1.4 - My PBX - CentOS 5.5, Asterisk 1.6
> 192.168.1.31 - my hardphone - TI DSP running my code on the bare metal
>
> Zoiper calls extension 21 which is mapped in the dial plan through to my
> hardphone. Linux arps for my mac, I reply with it. * sends me a 'new', I
> reply with an 'accept'. There is no response to the 'accept'. It just
> gets ignored and eventually * sends me another 'new'. There's got to be
> something wrong with my 'accept' but I just can't see it. Wireshark
> shows it as I expect. No error messages, nothing in the messages log, it
> just gets dropped.
>
> Screen shot of the 'accept' in Wireshark:
> http://b.shaw.home.comcast.net/accept.jpg
>
> Can anyone see what I'm doing wrong? Is the timestamp supposed to be my
> timestamp (ms offset from 'new') or the timestamp in the 'new'?
>
> Thanks,
>
> Bill
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-dev