[asterisk-dev] 1.6 vs. 1.8

[Alistair Cunningham]

On 28/08/11 18:01, Alec Davis wrote:
> There seems to be a simpler problem than with multiple localchan calls, and
> I would image very common.
> A simple dialplan line of DIAL(sip/phone1&sip/phone2&sip/phone3) and then
> attempt mulitple simutaneous pickups with *8, causes NULL object messages,
> and will leave orpanded channels.
> Doing the same with DAHDI to some fxs ports as in
> DIAL(DAHDI/1&DAHDI/2&DAHDI/3), results in a segfault when multiple
> simultaneous *8 pickups are attempted.
>
> I've attempted a couple of approaches, but both were too focused on the
> wrong point of view, they were reviewed at
> https://reviewboard.asterisk.org/r/1353/
>
> Richard Mudgett has an idea as how these are happening;
> [
> https://issues.asterisk.org/jira/browse/ASTERISK-18222?page=com.atlassian.ji
> ra.plugin.system.issuetabpanels:comment-tabpanel&focusedCommentId=181511#com
> ment-181511 ] hopefully he can put something together.
>
> Alistair: When the simple mulitple dial issue is fixed, hopefully it will
> also covers dialling multiple localchans.
> Then comes the question does it work with multiple simultaneous pickups
> using multiple localchans to attempt the pickups.

Thank you, that makes sense.

Alistair Cunningham
+1 888 468 3111
+44 20 799 39 799
http://integrics.com/