[asterisk-dev] Proposal for T.38 transparent gateway design in Asterisk
Andreas Sikkema
h323 at ramdyne.nl
Thu Apr 29 15:57:33 CDT 2010
>> Also
>> SIP-ATA 1<---SIP+T.38--->Asterisk<---SIP+G711----> SIP-ATA 2
>> is a valid scenario and should be supported. In this case Asterisk
>> should reINVITE to G711 if the T.38 reINVITE was rejected by SIP-ATA 2.
>
> I would say this should *not* be supported; if someone has a FAX machine
> attached to a SIP ATA, and that ATA does not support T.38, then they
> should get one that does. Even if we did support this scenario (assuming
> SIP-ATA1's FAX machine is the caller), the call is likely to not switch
> to T.38 at all since there is no gateway that will detect the FAX
> preamble on a TDM channel. If you configured Asterisk to do that, it
> would detect the preamble from SIP-ATA2 and send a T.38 re-INVITE to
> SIP-ATA2, not SIP-ATA2.
There's a sizable amount of SIP ATA's in the wild that offer the ability to configure an analogue port to "fax" port and therefore start each call from that port on the PSTN side straight with a T.38 offer in the SDP, no re-invite's needed.
--
Andreas
More information about the asterisk-dev
mailing list