[asterisk-dev] How to get to 10.000 open calls

[Klaus Darilion]

Alex Balashov schrieb:
> Also, directrtpsetup still doesn't work AFAIK.

For me it works. I am using Asterisk 1.4 (somewhere in-between 1.4.23 
and 1.4.24) in the following config:

[general]
canreinvite=no
directrtpsetup=yes

[peer]
type=peer
canreinvite=yes



for nat=... the default setting is used, which is AFAIK nat=no

regards
Klaus


> 
> Venefax wrote:
> 
>> I am using 1.6.2 and directrtp=yes. I need to scale to 10.000 open calls 
>> on a box with 1288 GB or RAM and 16 Cores. Is there any modification to 
>> the source code that would be obvious, any bottlenecks? I will never to 
>> transcoding and the media should, theoretically, flow outside. I have 15 
>> IP addresses already configured in the same box, on two different nics, 
>> to spread the interrupts. Is this a dream or will this work with some 
>> tweaking?
>>
>>  
>>
>> F. Alves
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-dev mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-dev
> 
>