[asterisk-dev] can't use signalling=> auto in 1.4.22 dahdi?

[sean darcy]

Switching back to 1.4.22 from 1.6.0 I got this error:


   == Parsing '/etc/asterisk/chan_dahdi.conf': Found


[Oct  9 15:58:44] ERROR[9789]: chan_dahdi.c:11337 process_dahdi: Unknown 
signalling method 'auto'
[Oct  9 15:58:44] ERROR[9789]: chan_dahdi.c:10886 build_channels: 
Signalling must be specified before any channels are.

chan_dahdi.conf:

context=internal      ; Uses the [internal] context in extensions.conf
signalling=auto     ; fxo_ks not auto  Use FXO signalling for an FXS 
channel - as set in sytem.conf.conf
channel => 1          ; Telephone attached to port 1
channel => 2          ; Telephone attached to port 2


context=incoming-pstn-line  ; Incoming calls go to [incoming-pstn-line] 
in extensions.conf
signalling=auto     ; fxs_ks not auto Use FXS signalling for an FXO 
channel - use as set in system.conf
faxdetect=incoming
busydetect=yes
channel => 4


Does this mean signalling = auto is only for 1.6.x? It used to work in 
zapata.conf.

sean