[asterisk-dev] wcfxo and X100P card won't play nice.

[Alex Balashov]

Sorry to cross-post - perhaps it takes a Zaptel developer to know the 
answer, though...

-------- Original Message --------
Subject: wcfxo and X100P card won't play nice.
Date: Tue, 15 Apr 2008 20:30:11 -0400
From: Alex Balashov <abalashov at evaristesys.com>
To: Asterisk Users Mailing List - Non-Commercial Discussion 
<asterisk-users at lists.digium.com>

Greetings,

This may have already been asked many times, but I cannot seem to find a
satisfactory and consistent answer anywhere.

I have an X100P card (from x100p.com) installed in a Dell PowerEdge 2850
or 2650 (cannot recall):

00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
00:04.1 Class ff00: Dell Remote Access Card III
00:04.2 Class ff00: Dell Embedded Remote Access: BMC/SMIC device
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
01:06.0 Communication controller: Motorola Wildcard X100P
03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge (rev 01)
04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller
3/Di (rev 01)

But, wcfxo won't recognise it:

NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:01:06.0 failed with error -5

This is running on a custom-compiled kernel 2.6.24.3 with Asterisk
1.4.18 and Zaptel 1.4.10.

Any ideas?

-- Alex

-- 
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599


-- 
Alex Balashov
Evariste Systems
Web    : http://www.evaristesys.com/
Tel    : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (706) 338-8599