[asterisk-dev] Poopy (ffffffff) on card 1!

[Matthew Fredrickson]

Vinícius Fontes wrote:
> Good morning everyone.
> 
> In a box with a TDM400P with 4 FXO modules and 32 channels configured with a TDMoE link, very often the first FXO channel gets a really loud noise and it is impossible to make or receive calls on that channel. ztmonitor reports the following:
> 
> 
> pabx:~# ztmonitor 1 -v
> 
> Visual Audio Levels.
> --------------------
>  Use zapata.conf file to adjust the gains if needed.
> 
> ( # = Audio Level  * = Max Audio Hit )
> <----------------(RX)----------------> <----------------(TX)---------------->
>  ###################################*                                       
> 
> 
> That even without anything connected on the FXO port.
> 
> I uncommented the line DEBUG=yes on /etc/default/zaptel, and I got the following in /var/log/messages:
> 
> Apr  7 10:08:50 pabx kernel: RING on 1/1!
> Apr  7 10:08:50 pabx kernel: Poopy (ffffffff) on card 1!
> Apr  7 10:08:50 pabx kernel: Poopy (00) on card 1!
> Apr  7 10:08:50 pabx kernel: Poopy (ffffffff) on card 1!
> Apr  7 10:08:50 pabx last message repeated 7 times
> Apr  7 10:08:51 pabx kernel: Poopy (00) on card 1!
> Apr  7 10:08:51 pabx kernel: Poopy (ffffffff) on card 1!
> Apr  7 10:08:51 pabx last message repeated 16 times
> Apr  7 10:08:51 pabx kernel: Poopy (00) on card 1!
> Apr  7 10:08:51 pabx kernel: Poopy (ffffffff) on card 1!
> Apr  7 10:08:51 pabx last message repeated 24 times
> Apr  7 10:08:51 pabx kernel: Poopy (00) on card 1!
> Apr  7 10:08:51 pabx kernel: Poopy (ffffffff) on card 1!
> Apr  7 10:08:51 pabx last message repeated 2 times
> 
> 
> The messages are repeated on and on. To solve the problem I need to unload wctdm and load it again. 
> 
> Could that indicate a faulty module or could it be only software-related?

This is not the appropriate forum for this type of question, but, in 
response, that's definitely something you want to call technical support 
about. :-)

-- 
Matthew Fredrickson
Software/Firmware Engineer
Digium, Inc.