[Asterisk-Dev] Asterisk - libunicall - MFCr2 *** settings problems??? ***

[Steve Underwood]

Hi,

Do calls always incorrectly hang up after the same amount of time? The 
log you sent just looks like a normal hangup. Can you send a complete 
log for the call, so I can see what happened before.

Regards,
Steve


kaws elchamal wrote:

>Dear Steve and *.* e1r2 developers and users,
>
>now MFCR2 is successfully installed! many thanks for
>your help.
>
>I'm living in Argelia. I have configure my MFCR2
>according argentina R2 settigs. (look at the end of
>the message)
>
>the testcall run perfectly (only warnings and I think
>that is just debug).
>but I have many problems and when I run
>Asterisk-MFCR2, generally in the begging no errors
>occures. after random time many inopportune errors
>occures:
>sound-cuts, dumb intervals, drop calls and
>disconnections!!!
>
>I think that R2 settings I use are not adapted to
>Argelian R2 settings. I will try change them but I
>have not idea where I must do changes. Please help me.
>
>Regards,
>
>kaws
>
>
>P.S: in the following: my configuration - Argelian R2
>parameters and an example of error.
>
>***********************
>my configuration  is :
>
>
>unical.conf:
>
>protocolclass=mfcr2
>protocolvariant=ar,20,4
>protocolend=cpe
>span=1,1,0,cas,hdb3
>cas=1-15:1101
>cas=17-31:1101
>loadzone=us
>defaultzone=us
>
>zaptel.conf:
>
>span=1,1,0,cas,hdb3
>cas=1-15:1101
>cas=17-31:1101
>
>
>*****************************************************
>the R2 setting of argelia according to quintum are : 
>
>CD-Bits ::::::::::::::::::::::: 0001
>Invert-Bits ::::::::::::::::::: 0000
>DNIS Length ::::::::::::::::::: 9 digits *
>Answer Tone ::::::::::::::::::: A-6
>Send 1st Digit :::::::::::::::: 1
>Group B Xmt Idle Tone ::::::::: B-6
>Group B Xmt Busy Tone ::::::::: B-3
>Group B Rcv Idle Tones :::::::: B-2 & B-3
>Group B Rcv Busy Tones :::::::: B-1 & B-2
>ANI Request ::::::::::::::::::: Do not request ANI
>ANI Length
>ANI Category Request
>Tone ANI Tone Request
>ANI Category :::::::::::::::::: I-1
>ANI Calling Party Category :::: II-1
>Seizure Ack Timeout ::::::::::: 150ms
>Release Guard Timeout ::::::::: 600ms
>* Always double-check the DNIS length with your
>carrier
>
>***************************************************
>example of inopportune disconnection:
>
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Rx
>bits 0x9   [1/      20/103/107]
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Far
>end disconnected - state 0x20
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:2548 handle_uc_event: UC event Far end
>disconnected
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:2854 handle_uc_event: Far disconnect
>cause 16
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:1088 unicall_hangup:
>unicall_hangup(UniCall/5-1)
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:1263 unicall_hangup: Causes 0 16
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>mfcr2_DropCall()
>Jan 17 10:04:17 WARNING[-1120736336]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Call
>disconnected - state 0x800
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:2548 handle_uc_event: UC event Drop
>call
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:2892 handle_uc_event: Doing a
>uc_ReleaseCall
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>mfcr2_ReleaseCall()
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2 Tx
>bits 0x9   [1/    1000/106/107]
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>Destroying call with CRN 32769
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:634 unicall_error: UniCall: mfcr2
>release_guard_expired
>Jan 17 10:04:17 WARNING[-1114432592]:
>chan_unicall.c:2548 handle_uc_event: UC event Release
>call
>
>
>		
>__________________________________ 
>Do you Yahoo!? 
>All your favorites on one personal page – Try My Yahoo!
>http://my.yahoo.com 
>_______________________________________________
>Asterisk-Dev mailing list
>Asterisk-Dev at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-dev
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-dev
>
>
>  
>