1 [Asterisk-Dev] Asterisk - libunicall - MFCr2 *** AGI application ***

[kaws elchamal]

ok when i switched to the new versions of libunicall
and spandsp  the problem is solved. Now I have another
problem!!!

I'm using an AGI app., the problem : hungup occure
always after the same amount of time (2 minutes)!!!

please help me 

Regards

kaws


--- Steve Underwood <steveu at coppice.org> wrote:

> Hi,
> 
> Do calls always incorrectly hang up after the same
> amount of time? The 
> log you sent just looks like a normal hangup. Can
> you send a complete 
> log for the call, so I can see what happened before.
> 
> Regards,
> Steve
>
> 
> kaws elchamal wrote:
> 
> >Dear Steve and *.* e1r2 developers and users,
> >
> >now MFCR2 is successfully installed! many thanks
> for
> >your help.
> >
> >I'm living in Argelia. I have configure my MFCR2
> >according argentina R2 settigs. (look at the end of
> >the message)
> >
> >the testcall run perfectly (only warnings and I
> think
> >that is just debug).
> >but I have many problems and when I run
> >Asterisk-MFCR2, generally in the begging no errors
> >occures. after random time many inopportune errors
> >occures:
> >sound-cuts, dumb intervals, drop calls and
> >disconnections!!!
> >
> >I think that R2 settings I use are not adapted to
> >Argelian R2 settings. I will try change them but I
> >have not idea where I must do changes. Please help
> me.
> >
> >Regards,
> >
> >kaws
> >
> >
> >P.S: in the following: my configuration - Argelian
> R2
> >parameters and an example of error.
> >
> >***********************
> >my configuration  is :
> >
> >
> >unical.conf:
> >
> >protocolclass=mfcr2
> >protocolvariant=ar,20,4
> >protocolend=cpe
> >span=1,1,0,cas,hdb3
> >cas=1-15:1101
> >cas=17-31:1101
> >loadzone=us
> >defaultzone=us
> >
> >zaptel.conf:
> >
> >span=1,1,0,cas,hdb3
> >cas=1-15:1101
> >cas=17-31:1101
> >
> >
>
>*****************************************************
> >the R2 setting of argelia according to quintum are
> : 
> >
> >CD-Bits ::::::::::::::::::::::: 0001
> >Invert-Bits ::::::::::::::::::: 0000
> >DNIS Length ::::::::::::::::::: 9 digits *
> >Answer Tone ::::::::::::::::::: A-6
> >Send 1st Digit :::::::::::::::: 1
> >Group B Xmt Idle Tone ::::::::: B-6
> >Group B Xmt Busy Tone ::::::::: B-3
> >Group B Rcv Idle Tones :::::::: B-2 & B-3
> >Group B Rcv Busy Tones :::::::: B-1 & B-2
> >ANI Request ::::::::::::::::::: Do not request ANI
> >ANI Length
> >ANI Category Request
> >Tone ANI Tone Request
> >ANI Category :::::::::::::::::: I-1
> >ANI Calling Party Category :::: II-1
> >Seizure Ack Timeout ::::::::::: 150ms
> >Release Guard Timeout ::::::::: 600ms
> >* Always double-check the DNIS length with your
> >carrier
> >
> >***************************************************
> >example of inopportune disconnection:
> >
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2 Rx
> >bits 0x9   [1/      20/103/107]
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2
> Far
> >end disconnected - state 0x20
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:2548 handle_uc_event: UC event Far
> end
> >disconnected
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:2854 handle_uc_event: Far disconnect
> >cause 16
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:1088 unicall_hangup:
> >unicall_hangup(UniCall/5-1)
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:1263 unicall_hangup: Causes 0 16
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2
> >mfcr2_DropCall()
> >Jan 17 10:04:17 WARNING[-1120736336]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2
> Call
> >disconnected - state 0x800
> >Jan 17 10:04:17 WARNING[-1114432592]:
> >chan_unicall.c:2548 handle_uc_event: UC event Drop
> >call
> >Jan 17 10:04:17 WARNING[-1114432592]:
> >chan_unicall.c:2892 handle_uc_event: Doing a
> >uc_ReleaseCall
> >Jan 17 10:04:17 WARNING[-1114432592]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2
> >mfcr2_ReleaseCall()
> >Jan 17 10:04:17 WARNING[-1114432592]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2 Tx
> >bits 0x9   [1/    1000/106/107]
> >Jan 17 10:04:17 WARNING[-1114432592]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2
> >Destroying call with CRN 32769
> >Jan 17 10:04:17 WARNING[-1114432592]:
> >chan_unicall.c:634 unicall_error: UniCall: mfcr2
> >release_guard_expired
> >Jan 17 10:04:17 WARNING[-1114432592]:
> >chan_unicall.c:2548 handle_uc_event: UC event
> Release
> >call
> >
> >
> >		
> >__________________________________ 
> >Do you Yahoo!? 
> >All your favorites on one personal page – Try My
> Yahoo!
> >http://my.yahoo.com 
> >_______________________________________________
> >Asterisk-Dev mailing list
> >Asterisk-Dev at lists.digium.com
>
>http://lists.digium.com/mailman/listinfo/asterisk-dev
> >To UNSUBSCRIBE or update options visit:
> >  
>
http://lists.digium.com/mailman/listinfo/asterisk-dev
> >
> >
> >  
> >
> 
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-dev
> 



		
__________________________________ 
Do you Yahoo!? 
Read only the mail you want - Yahoo! Mail SpamGuard. 
http://promotions.yahoo.com/new_mail