[Asterisk-Dev] Cisco 7970 SCCP Configs.

[Paul Duffy]

Hi All

I'm trying to get my 7970 working on the latest head version of Asterisk
without success, perhaps someone could help.

I'm using the head version of Asterisk with the chan_sccp from berlios.de
dated 7th August.

The compilation of chan_sccp seems to have worked without any problem,
however I'm pretty sure the problem I have is with the config files in
TFTPBOOT:-

With the 7970 I got the following files:-

Cnu70.2-7-4-134.sbn
CVM70.2-0-0-112.sbn
Jar70.2-9-0-117.sbn
TERM70.7-0-1-0s.LOADS
TERM70.DEFAULT.loads
TERM71.DEFAULT.loads

Now I've done configs with the 7960 using SIP without a problem and that all
works fine, however (and I've read through the lists and can't find a
reference to this) which file is the firmware load?  i.e. Which file should
be the one specified in the SEP<mac>.cnf.xml

In the SEP<mac>.cnf.xml I'm assuming that in the <loadInformation> line I
should be selecting one of these files, however when I've tried all these
files I just get the message 'Load ID Incorrect' on the phone.

If someone could post their SEP<mac>.cnf.xml and xmlDefault.CNF.XML files
I'd be very grateful as I'm sure I'm just missing something obvious but just
can't find it at the moment.  Also there seems to be different versions of
the xmlDefault.CNF.XML or XMLDefault.cnf.xml files regarding the case it
should be in, could someone advise which they think is the correct format
please.

Also if the files you're using are a different version from the firmware on
the phone does the 7970 automatically update it's firmware the same way the
7960 does with the SIP firmware?

Thanks in advance.

P