[Asterisk-Dev] Asterisk-to-IVR Problem

Rollin Weeks rollin.sling at gmail.com
Fri Aug 5 08:34:24 MST 2005 

Skipped content of type multipart/alternative-------------- next part --------------
#
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
fxsks=1 # For the X100P
fxoks=2 # For the TDM400P (TDM10B)
#
loadzone = us
#
defaultzone=us

----------------

;
; Zapata telephony interface
;
; Configuration file

[channels]
;
language=en

context=incoming

switchtype=national

signalling=fxs_ks

rxwink=300              ; Atlas seems to use long (250ms) winks

; Whether or not to use caller ID
;
usecallerid=asreceived

; Whether or not to hide outgoing caller ID (Override with *67 or *82)
;
hidecallerid=no
;
callwaitingcallerid=yes

; for default voicemail context, the example below is fine:
;
mailbox=1234

echocancel=yes

; If you are having trouble with DTMF detection, you can relax the
; DTMF detection parameters.  Relaxing them may make the DTMF detector
; more likely to have "talkoff" where DTMF is detected when it
; shouldn't be.
;
relaxdtmf=yes

; You may also set the default receive and transmit gains (in dB)
;
rxgain=0.0
txgain=0.0

immediate=no

; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D
; etc, it can be useful to perform busy detection either in an effort to 
; detect hangup or for detecting busies
;
busydetect=yes
;
; If busydetect is enabled, is also possible to specify how many
; busy tones to wait before hanging up. The default is 4, but
; better results can be achieved if set to 6 or even 8. Mind that
; higher the number, more time is needed to hangup a channel, but
; lower is probability to get random hangups
;
busycount=40

; Select which class of music to use for music on hold.  If not specified
; then the default will be used.
;
musiconhold=default

channel => 1

signalling=fxo_ks

context=internal

channel => 2

----------------

; Home grown extension file
[globals]
;RECEPTIONIST=Zap/1
;

[incoming]
exten => s,1,Wait(1)
exten => s,2,Answer()
exten => s,3,Playback(demo-congrats) ;  Plays the demo-congrats file after answering the line
exten => s,4,Dial,Zap/2/1000\20
exten => s,5,Hangup

[internal]
exten => 1000,1,Answer()
exten => 1000,2,Wait(2)
exten => 1000,3,Hangup 

-------------------



    -- Starting simple switch on 'Zap/1-1'
Urgent handler
Aug  4 15:43:39 DEBUG[5059]: pbx.c:1274 pbx_extension_helper: Launching 'Wait'
    -- Executing Wait("Zap/1-1", "1") in new stack
Urgent handler
Aug  4 15:43:40 DEBUG[5059]: pbx.c:1274 pbx_extension_helper: Launching 'Answer'
    -- Executing Answer("Zap/1-1", "") in new stack
Urgent handler
Aug  4 15:43:40 DEBUG[5059]: chan_zap.c:2301 zt_answer: Took Zap/1-1 off hook
Aug  4 15:43:40 DEBUG[5059]: chan_zap.c:1231 zt_enable_ec: Enabled echo cancellation on channel 1
Aug  4 15:43:40 DEBUG[5059]: chan_zap.c:1250 zt_train_ec: No echo training requested
Aug  4 15:43:40 DEBUG[5059]: pbx.c:1274 pbx_extension_helper: Launching 'Playback'
    -- Executing Playback("Zap/1-1", "demo-congrats") in new stack
Urgent handler
Aug  4 15:43:40 DEBUG[5059]: channel.c:1719 ast_set_write_format: Set channel Zap/1-1 to write format gsm
Aug  4 15:43:40 DEBUG[5059]: channel.c:1128 ast_settimeout: Scheduling timer at 160 sample intervals
    -- Playing 'demo-congrats' (language 'en')
Urgent handler
Aug  4 15:44:08 DEBUG[5059]: channel.c:1128 ast_settimeout: Scheduling timer at 0 sample intervals
Aug  4 15:44:08 DEBUG[5059]: channel.c:1128 ast_settimeout: Scheduling timer at 0 sample intervals
Aug  4 15:44:08 DEBUG[5059]: channel.c:1719 ast_set_write_format: Set channel Zap/1-1 to write format ulaw
Aug  4 15:44:08 DEBUG[5059]: pbx.c:1274 pbx_extension_helper: Launching 'Dial'
    -- Executing Dial("Zap/1-1", "Zap/2/1000\20") in new stack
Aug  4 15:44:08 DEBUG[5059]: chan_zap.c:6907 zt_request: Using channel 2
Aug  4 15:44:08 DEBUG[5059]: chan_zap.c:1563 zt_call: FXO: setup deferred dialstring: 1000\20
    -- Called 2/1000\20
Aug  4 15:44:08 DEBUG[5059]: channel.c:1752 ast_set_read_format: Set channel Zap/2-1 to read format ulaw
Aug  4 15:44:08 DEBUG[5059]: channel.c:1719 ast_set_write_format: Set channel Zap/1-1 to write format ulaw
Aug  4 15:44:08 DEBUG[5059]: channel.c:1719 ast_set_write_format: Set channel Zap/2-1 to write format ulaw
Aug  4 15:44:08 DEBUG[5059]: channel.c:1752 ast_set_read_format: Set channel Zap/1-1 to read format ulaw
Urgent handler
Urgent handler
Aug  4 15:44:08 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...
    -- Zap/2-1 is ringing

*****

    -- Zap/2-1 is ringing
Urgent handler
Aug  4 15:44:08 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...
Aug  4 15:44:08 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...

******

ug  4 15:44:10 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...
Aug  4 15:44:10 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...
Aug  4 15:44:10 DEBUG[5059]: chan_zap.c:3786 __zt_exception: Exception on 17, channel 2
Aug  4 15:44:10 DEBUG[5059]: chan_zap.c:3089 zt_handle_event: Got event Ringer Off(11) on channel 2 (index 0)
    -- Zap/2-1 is ringing
Urgent handler
Aug  4 15:44:10 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...

******

ug  4 15:44:12 DEBUG[5059]: chan_zap.c:3786 __zt_exception: Exception on 17, channel 2
Aug  4 15:44:12 DEBUG[5059]: chan_zap.c:3089 zt_handle_event: Got event Ring/Answered(2) on channel 2 (index 0)
Aug  4 15:44:12 DEBUG[5059]: chan_zap.c:1231 zt_enable_ec: Enabled echo cancellation on channel 2
Aug  4 15:44:12 DEBUG[5059]: chan_zap.c:1250 zt_train_ec: No echo training requested
Aug  4 15:44:12 DEBUG[5059]: chan_zap.c:3352 zt_handle_event: channel 2 answered
Aug  4 15:44:12 DEBUG[5059]: chan_zap.c:3372 zt_handle_event: Sent FXO deferred digit string: Tw1000\20
Aug  4 15:44:12 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...

******

Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:4187 zt_write: Dropping frame since I'm still dialing on Zap/2-1...
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:3786 __zt_exception: Exception on 17, channel 2
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:3089 zt_handle_event: Got event Dial Complete(9) on channel 2 (index 0)
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:1215 zt_enable_ec: Echo cancellation already on
Aug  4 15:44:13 DEBUG[5059]: channel.c:1366 ast_read: Dropping duplicate answer!
    -- Zap/2-1 answered Zap/1-1
Aug  4 15:44:13 DEBUG[5059]: channel.c:1752 ast_set_read_format: Set channel Zap/1-1 to read format ulaw
Aug  4 15:44:13 DEBUG[5059]: channel.c:1719 ast_set_write_format: Set channel Zap/2-1 to write format ulaw
Aug  4 15:44:13 DEBUG[5059]: channel.c:1719 ast_set_write_format: Set channel Zap/1-1 to write format ulaw
Aug  4 15:44:13 DEBUG[5059]: channel.c:1752 ast_set_read_format: Set channel Zap/2-1 to read format ulaw
    -- Attempting native bridge of Zap/1-1 and Zap/2-1
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:2677 zt_bridge: master: 1, slave: 2, nothingok: 0
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:2692 zt_bridge: Stoping tones on 1/0 talking to 2/0
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:2704 zt_bridge: Stoping tones on 2/0 talking to 1/0
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:1263 zt_disable_ec: disabled echo cancellation on channel 1
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:1263 zt_disable_ec: disabled echo cancellation on channel 2
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:2567 zt_link: Making 2 slave to master 1 at 0
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:1061 conf_add: Added 17 to conference 9/1
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:1061 conf_add: Added 15 to conference 9/2
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:1206 update_conf: Updated conferencing on 1, with 0 conference users
Aug  4 15:44:13 DEBUG[5059]: chan_zap.c:1206 update_conf: Updated conferencing on 2, with 0 conference users
Urgent handler
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:3786 __zt_exception: Exception on 17, channel 2
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:3089 zt_handle_event: Got event On hook(1) on channel 2 (index 0)
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1263 zt_disable_ec: disabled echo cancellation on channel 2
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:2511 zt_unlink: Unlinking slave 2 from 1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1093 conf_del: Removed 17 from conference 9/1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1093 conf_del: Removed 15 from conference 9/2
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1206 update_conf: Updated conferencing on 1, with 0 conference users
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1231 zt_enable_ec: Enabled echo cancellation on channel 1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1231 zt_enable_ec: Enabled echo cancellation on channel 2
Aug  4 15:44:26 DEBUG[5059]: channel.c:2640 ast_channel_bridge: Returning from native bridge, channels: Zap/1-1, Zap/2-1
Aug  4 15:44:26 DEBUG[5059]: channel.c:739 ast_hangup: Hanging up channel 'Zap/2-1'
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1959 zt_hangup: zt_hangup(Zap/2-1)
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1987 zt_hangup: Hangup: channel: 2 index = 0, normal = 17, callwait = -1, thirdcall = -1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1263 zt_disable_ec: disabled echo cancellation on channel 2
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:2390 zt_setoption: Set option TDD MODE, value: OFF(0) on Zap/2-1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1206 update_conf: Updated conferencing on 2, with 0 conference users
    -- Hungup 'Zap/2-1'
Aug  4 15:44:26 DEBUG[5059]: app_dial.c:1054 dial_exec: Exiting with DIALSTATUS=ANSWER.
Aug  4 15:44:26 DEBUG[5059]: pbx.c:1851 ast_pbx_run: Spawn extension (incoming,s,4) exited non-zero on 'Zap/1-1'
Aug  4 15:44:26 DEBUG[5059]: channel.c:739 ast_hangup: Hanging up channel 'Zap/1-1'
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1959 zt_hangup: zt_hangup(Zap/1-1)
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1987 zt_hangup: Hangup: channel: 1 index = 0, normal = 15, callwait = -1, thirdcall = -1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1263 zt_disable_ec: disabled echo cancellation on channel 1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:2390 zt_setoption: Set option TDD MODE, value: OFF(0) on Zap/1-1
Aug  4 15:44:26 DEBUG[5059]: chan_zap.c:1206 update_conf: Updated conferencing on 1, with 0 conference users
    -- Hungup 'Zap/1-1'

More information about the asterisk-dev mailing list