[Asterisk-Dev] New channel

[Michael Bielicki]

I can understan that, although the whole point of the asterisk project
was to create a industry class PBX on DSP less cards. Don't see the
sense of implementing a channel for the most expensive card available
on the market, although the audiocodes cards are really nice, but a
hell of an overkill here.


On Mon, 18 Oct 2004 10:13:49 +0200, Marcin Kwiatkowski
<mkwiatkowski at telebonus.pl> wrote:
> Michael Bielicki wrote:
> 
> >what problems do you have with MGCP ? We use mgcp just fine with
> >swissvoice mgcp phones. You may also take a look at Paweł pierscioneks
> >side who implemented the mgcp changes relevant to cable modems:
> >http://asterisk.urtho.net/tiki-index.php
> >
> >Also I think chan_modem is basically the most unmaintained channel
> >driver around ...
> >
> >Just my 2 groszy .)
> >cheers
> >
> >Michał
> >
> >
> 
> Problem is in *'s MGCP implementation. On the other hand - AudioCodes
> TP240 is intelligent board, dual span E1, several DSP's and its own
> ethernet port. It can boot from bootp as far as proprietary VoPLIB via
> PCI (ca. 10MB of firmware). We tried to communicate with board through
> MGCP, but asterisk wants some events which aren't implemented in ISDN
> (such as hook-on, hook-off, and ring generation). Also external MGCP
> terminals (ip phones) works fine. We prefer to use native communication
> with board rather than via ethernet port and MGCP.
> 
> Thanks,
>     Falcon
> 
> --
> 
> 
> Marcin Kwiatkowski
> Senior IT Specialist
> Telebonus Sp. z o.o.
> Legionow 30
> 43-300 Bielsko-Biala
> pho/fax: +48 (33) 828 25 21
> mob: +48 605 923 944
> 
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
> 


-- 
Michael Bielicki