[Asterisk-Dev] Help Asterisk can't call mobiles

[Steven Critchfield]

On Wed, 2004-03-10 at 02:33, Rick.Bates at kaz-group.com wrote:
> Hello from down under,

> -- ACKing all packets from 87 to (but not including) 88
> -- Since there was nothing left, stopping T200 counter
> -- Stopping T203 counter since we got an ACK
> -- Nothing left, starting T203 counter
> < Protocol Discriminator: Q.931 (8)  len=13
> < Call Ref: len= 2 (reference 32775/0x8007) (Terminator)
> < Message type: DISCONNECT (69)
> < Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0
> Location: Public network serving the remote user (4)
> <                  Ext: 1  Cause: Normal, unspecified (31), class = Normal
> Event (1) ]
> < Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0:
> 0   Location: Public network serving the local user (2)
> <                               Ext: 1  Progress Description: Inband
> information or appropriate pattern now available. (8) ]
> Sending Receiver Ready (93)

Granted I am no where near a PRI expert, but it seems the remote side
complained about the digits you sent to it, but it is doing it inband.
Seems that asterisk sees that normal disconnect and is clearing the
channel and doesn't have the data to communicate to you what went wrong.

Quick suggestions is to make sure you are providing the correct kind of
number presentation and that you actually dialed the number as the
network is expecting it.
-- 
Steven Critchfield <critch at basesys.com>