[Asterisk-Dev] Problems with TE405P and generic hdlc

[Patrick J. Conroy]

I am trying to bring up a ppp internet T1 on a TE405P and I am not having
any luck.  I have hdlc patched into the 2.4.18 kernel and I make zaptel with
CONFIG_ZAPATA_NET uncommented.  I modprobe the zaptel, wct4xxp and hdlc
modules with no problems.  I then run the following commands:

sethdlc hdlc0 ppp
ifconfig hdlc0 64.80.211.42 pointopoint 64.80.211.41 netmask 255.255.255.252
up
route add -net 64.80.211.0 netmask 255.255.255.252 hdlc0

Everything seems to run fine without errors, but I can't ping the telco side
of the T1.  When I run ifconfig it looks like I am transmitting packets, but
all received packets seem to be getting dropped.  I have cleared iptables to
make sure that nothing is going wrong there.  Does anyone have any ideas?
At this point, I don't know if I compiled something wrong, or if I have the
route table set up wrong, or if there is a legitimate bug somewhere.

BTW, I have 2 other ports on the TE405P running to a channel bank and a PRI,
both of which work fine.

Any help would be greatly appreciated.

Thanks,
Patrick

-- 
This message has been scanned for viruses and
dangerous content, and is believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20040602/2e2913cb/attachment.htm