[Asterisk-Dev] Kernel Panic: Aiee, Killing Interrupt Handler

[Shawn L. Djernes]

Hi All,

Actually this is more convoluted then you think.  I had this problem about a
month ago.  Debian has released GCC 3.2 and 3.3 since that kernel was made.
Build your self a new kernel on this box and then build Zaptel and life will
be good again.

Shawn

-----Original Message-----
From: asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com]On Behalf Of Steven Critchfield
Sent: Saturday, June 21, 2003 12:22
To: asterisk-dev at lists.digium.com
Subject: Re: [Asterisk-Dev] Kernel Panic: Aiee, Killing Interrupt Handler

On Sat, 2003-06-21 at 06:59, Shimul Kanti Barua wrote:
> Hi all,
>
> Having the following system configuration.......
>
> VIA EDEN 800 MHz processor
> 256 MB RAM
> Wildcard X100P
>
> Debian 3.1
> kernel-2.4.18-bf2.4
>
> I am gtting this error when I want to load wcfxo driver
>
> general protection fault 0000
> CPU: 0
> -----------
> -----------
> <0> Kernel panic: Aiee, killing interrupt handler!
> In interrupt handler - not syncing
>
>
> My computer completely froze at this point. Any help would be much
> appreciated!

Just a quick off the top of my head, I think I remembeer this on this
list already....

Did you remember to modify the make file to set MARCH to 586 and remove
MMX optimizations?

Hopefully this gives you somewhere to start till someone with definitive
information can answer for you.
--
Steven Critchfield <critch at basesys.com>

_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev