[Asterisk-Dev] FXO Hardware Sourcing

[Stephane Fourdrinier]

I have one here, couldn't get it to work with Asterisk.

Here is the output of cat /proc/pci
  Bus  2, device  10, function  0:
    Communication controller: PCI device 1057:5608 (Motorola) (rev 0).
      IRQ 9.
      Master Capable.  Latency=32.  Min Gnt=1.Max Lat=128.
      I/O at 0xd800 [0xd8ff].
      Non-prefetchable 32 bit memory at 0xed800000 [0xed800fff].

I couldn't get it to work with Asterisk, maybe you'll be luckier than me
!


> -----Original Message-----
> From: asterisk-dev-admin at lists.digium.com [mailto:asterisk-dev-
> admin at lists.digium.com] On Behalf Of Eric Wieling
> Sent: Wednesday, February 26, 2003 7:19 PM
> To: asterisk-dev at lists.digium.com
> Subject: Re: [Asterisk-Dev] FXO Hardware Sourcing
> 
> On Wed, Feb 26, 2003 at 05:32:11PM -0600, Jim Fleming wrote:
> > The wcfxo.c code may then be out-dated, or maybe the table entries
are
> reversed.
> > It seems to indicate that the the E159 0001 PCI device is the
Wildcard
> 101P instead of the 100P.
> >
> > The main question is how long the hardware will be viable,
available,
> etc.
> >
> > This appears to be the same board.
> > http://www.amigo.com.tw/main.htm
> > AMI-IA92/IE92
> >       INTERNAL V.92 PCI DATA/FAX/TAM MODEM
> 
> I have a couple of these on order.  I'll let you know if the
> driver thinks these boards are the same as the LSS FXO board.
> They cost about $10 retail.
> 
> --Eric
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev