[Asterisk-code-review] BuildSystem: Check for alternate openssl packages (asterisk[18])
Friendly Automation
asteriskteam at digium.com
Thu Oct 21 07:20:41 CDT 2021
Friendly Automation has submitted this change. ( https://gerrit.asterisk.org/c/asterisk/+/16618 )
Change subject: BuildSystem: Check for alternate openssl packages
......................................................................
BuildSystem: Check for alternate openssl packages
OpenSSL is one of those packages that often have alternatives
with later versions. For instance, CentOS/EL 7 has an
openssl package at version 1.0.2 but there's an openssl11
package from the epel repository that has 1.1.1. This gets
installed to /usr/include/openssl11 and /usr/lib64/openssl11.
Unfortunately, the existing --with-ssl and --with-crypto
./configure options expect to point to a source tree and
don't work in this situation. Also unfortunately, the
checks in ./configure don't use pkg-config.
In order to make this work with the existing situation, you'd
have to run...
./configure --with-ssl=/usr/lib64/openssl11 \
--with-crypto=/usr/lib64/openssl11 \
CFLAGS=-I/usr/include/openssl11
BUT... those options don't get passed down to bundled pjproject
so when you run make, you have to include the CFLAGS again
which is a big pain.
Oh... To make matters worse, although you can specify
PJPROJECT_CONFIGURE_OPTS on the ./configure command line,
they don't get saved so if you do a make clean, which will
force a re-configure of bundled pjproject, those options
don't get used.
So...
* In configure.ac... Since pkg-config is installed by install_prereq
anyway, we now use it to check for the system openssl >= 1.1.0.
If that works, great. If not, we check for the openssl11
package. If that works, great. If not, we fall back to just
checking for any openssl. If pkg-config isn't installed for some
reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified
on the ./configure command line, we fall back to the existing
logic that uses AST_EXT_LIB_CHECK().
* The whole OpenSSL check process has been moved up before
THIRD_PARTY_CONFIGURE(), which does the initial pjproject
bundled configure, is run. This way the results of the above
checks, which may result in new include or library directories,
is included.
* Although not strictly needed for openssl, We now save the value of
PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used
again if a re-configure is triggered.
ASTERISK-29693
Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde
---
M configure
M configure.ac
M include/asterisk/autoconfig.h.in
M makeopts.in
M menuselect/configure
M third-party/pjproject/Makefile
M third-party/pjproject/configure.m4
7 files changed, 902 insertions(+), 542 deletions(-)
Approvals:
George Joseph: Looks good to me, approved
Friendly Automation: Approved for Submit
diff --git a/configure b/configure
index 0ce03e9..f89bac9 100755
--- a/configure
+++ b/configure
@@ -711,9 +711,6 @@
UUID_INCLUDE
LIBEDIT_LIBS
LIBEDIT_CFLAGS
-PKG_CONFIG_LIBDIR
-PKG_CONFIG_PATH
-PKG_CONFIG
ALLOCA
PBX_ZLIB
ZLIB_DIR
@@ -759,10 +756,6 @@
RT_DIR
RT_INCLUDE
RT_LIB
-PBX_OPENSSL
-OPENSSL_DIR
-OPENSSL_INCLUDE
-OPENSSL_LIB
PBX_SRTP_GET_VERSION
SRTP_GET_VERSION_DIR
SRTP_GET_VERSION_INCLUDE
@@ -1153,14 +1146,6 @@
DAHDI_DIR
DAHDI_INCLUDE
DAHDI_LIB
-PBX_OPENSSL_BIO_METHOD
-OPENSSL_BIO_METHOD_DIR
-OPENSSL_BIO_METHOD_INCLUDE
-OPENSSL_BIO_METHOD_LIB
-PBX_CRYPTO
-CRYPTO_DIR
-CRYPTO_INCLUDE
-CRYPTO_LIB
PBX_CRYPT
CRYPT_DIR
CRYPT_INCLUDE
@@ -1208,6 +1193,20 @@
PBX_JANSSON
JANSSON_BUNDLED
JANSSON_CONFIGURE_OPTS
+OPENSSL_LIBS
+OPENSSL_CFLAGS
+PBX_OPENSSL_BIO_METHOD
+OPENSSL_BIO_METHOD_DIR
+OPENSSL_BIO_METHOD_INCLUDE
+OPENSSL_BIO_METHOD_LIB
+PBX_OPENSSL
+OPENSSL_DIR
+OPENSSL_INCLUDE
+OPENSSL_LIB
+PBX_CRYPTO
+CRYPTO_DIR
+CRYPTO_INCLUDE
+CRYPTO_LIB
AST_C_COMPILER_FAMILY
AST_CLANG_BLOCKS
AST_CLANG_BLOCKS_LIBS
@@ -1230,6 +1229,9 @@
PBX_XMLSTARLET
PBX_FLEX
PBX_BISON
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
OPENSSL
SHA1SUM
LDCONFIG
@@ -1377,6 +1379,8 @@
enable_coverage
with_jansson_bundled
with_pjproject_bundled
+with_crypto
+with_ssl
with_asound
with_bfd
with_execinfo
@@ -1385,7 +1389,6 @@
with_codec2
with_cpg
with_crypt
-with_crypto
with_dahdi
with_avcodec
with_gsm
@@ -1442,7 +1445,6 @@
with_sqlite
with_sqlite3
with_srtp
-with_ssl
with_suppserv
with_tds
with_timerfd
@@ -1473,12 +1475,14 @@
CXXFLAGS
CCC
CXXCPP
-JANSSON_CONFIGURE_OPTS
-PJPROJECT_CONFIGURE_OPTS
-LUA_VERSIONS
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
+OPENSSL_CFLAGS
+OPENSSL_LIBS
+JANSSON_CONFIGURE_OPTS
+PJPROJECT_CONFIGURE_OPTS
+LUA_VERSIONS
LIBEDIT_CFLAGS
LIBEDIT_LIBS
JANSSON_CFLAGS
@@ -2148,6 +2152,8 @@
--with-jansson-bundled Use bundled jansson library
--with-pjproject-bundled
Use bundled pjproject libraries (default)
+ --with-crypto=PATH use OpenSSL Cryptography files in PATH
+ --with-ssl=PATH use OpenSSL Secure Sockets Layer files in PATH
--with-asound=PATH use Advanced Linux Sound Architecture files in PATH
--with-bfd=PATH use Debug symbol decoding files in PATH
--with-execinfo=PATH use Stack Backtrace files in PATH
@@ -2156,7 +2162,6 @@
--with-codec2=PATH use Codec 2 Audio Decoder/Encoder files in PATH
--with-cpg=PATH use Corosync files in PATH
--with-crypt=PATH use password and data encryption files in PATH
- --with-crypto=PATH use OpenSSL Cryptography files in PATH
--with-dahdi=PATH use DAHDI files in PATH
--with-avcodec=PATH use Ffmpeg and avcodec files in PATH
--with-gsm=PATH use External GSM files in PATH, use 'internal' GSM
@@ -2217,7 +2222,6 @@
--with-sqlite=PATH use SQLite files in PATH
--with-sqlite3=PATH use SQLite files in PATH
--with-srtp=PATH use Secure RTP files in PATH
- --with-ssl=PATH use OpenSSL Secure Sockets Layer files in PATH
--with-suppserv=PATH use mISDN Supplemental Services files in PATH
--with-tds=PATH use FreeTDS files in PATH
--with-timerfd=PATH use timerfd files in PATH
@@ -2241,17 +2245,21 @@
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
+ PKG_CONFIG path to pkg-config utility
+ PKG_CONFIG_PATH
+ directories to add to pkg-config's search path
+ PKG_CONFIG_LIBDIR
+ path overriding pkg-config's built-in search path
+ OPENSSL_CFLAGS
+ C compiler flags for OPENSSL, overriding pkg-config
+ OPENSSL_LIBS
+ linker flags for OPENSSL, overriding pkg-config
JANSSON_CONFIGURE_OPTS
Additional configure options to pass to bundled jansson
PJPROJECT_CONFIGURE_OPTS
Additional configure options to pass to bundled pjproject
LUA_VERSIONS
A space separated list of target lua versions to test.
- PKG_CONFIG path to pkg-config utility
- PKG_CONFIG_PATH
- directories to add to pkg-config's search path
- PKG_CONFIG_LIBDIR
- path overriding pkg-config's built-in search path
LIBEDIT_CFLAGS
C compiler flags for LIBEDIT, overriding pkg-config
LIBEDIT_LIBS
@@ -7870,6 +7878,127 @@
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+ ac_pt_PKG_CONFIG=$PKG_CONFIG
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_PKG_CONFIG" = x; then
+ PKG_CONFIG=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ PKG_CONFIG=$ac_pt_PKG_CONFIG
+ fi
+else
+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=0.9.0
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ PKG_CONFIG=""
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for bison that supports parse-param" >&5
$as_echo_n "checking for bison that supports parse-param... " >&6; }
if ${ac_cv_path_BISON2+:} false; then :
@@ -9084,6 +9213,679 @@
PJPROJECT_BUNDLED=no
fi
+#
+# OpenSSL stuff has to be done here because we want to pass
+# any resulting CFLAGS and LDFLAGS to the bundled pjproject
+# configure done in THIRD_PARTY_CONFIGURE()
+#
+
+ CRYPTO_DESCRIP="OpenSSL Cryptography"
+ CRYPTO_OPTION="crypto"
+ PBX_CRYPTO=0
+
+# Check whether --with-crypto was given.
+if test "${with_crypto+set}" = set; then :
+ withval=$with_crypto;
+ case ${withval} in
+ n|no)
+ USE_CRYPTO=no
+ # -1 is a magic value used by menuselect to know that the package
+ # was disabled, other than 'not found'
+ PBX_CRYPTO=-1
+ ;;
+ y|ye|yes)
+ ac_mandatory_list="${ac_mandatory_list} CRYPTO"
+ ;;
+ *)
+ CRYPTO_DIR="${withval}"
+ ac_mandatory_list="${ac_mandatory_list} CRYPTO"
+ ;;
+ esac
+
+fi
+
+
+
+
+
+
+
+
+ OPENSSL_DESCRIP="OpenSSL Secure Sockets Layer"
+ OPENSSL_OPTION="ssl"
+ PBX_OPENSSL=0
+
+# Check whether --with-ssl was given.
+if test "${with_ssl+set}" = set; then :
+ withval=$with_ssl;
+ case ${withval} in
+ n|no)
+ USE_OPENSSL=no
+ # -1 is a magic value used by menuselect to know that the package
+ # was disabled, other than 'not found'
+ PBX_OPENSSL=-1
+ ;;
+ y|ye|yes)
+ ac_mandatory_list="${ac_mandatory_list} OPENSSL"
+ ;;
+ *)
+ OPENSSL_DIR="${withval}"
+ ac_mandatory_list="${ac_mandatory_list} OPENSSL"
+ ;;
+ esac
+
+fi
+
+
+
+
+
+
+
+
+OPENSSL_BIO_METHOD_DESCRIP="OpenSSL BIO Method Support"
+OPENSSL_BIO_METHOD_OPTION=crypto
+OPENSSL_BIO_METHOD_DIR=${CRYPTO_DIR}
+
+PBX_OPENSSL_BIO_METHOD=0
+
+
+
+
+
+
+
+# If neither --without-ssl (PBX_OPENSSL=-1) nor --without-crypto (PBX_CRYPTO=-1)
+# and there were no directories atdded to --with-ssl and --with-crypto, and
+# pkg-config is installed (which is should be by install_prereq).
+if test "x$PKG_CONFIG" != "x" -a $PBX_OPENSSL -ge 0 -a $PBX_CRYPTO -ge 0 -a "x$OPENSSL_DIR" == "x" ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking OPENSSL with pkg-config" >&5
+$as_echo "$as_me: checking OPENSSL with pkg-config" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether system openssl > 1.1.0" >&5
+$as_echo "$as_me: checking whether system openssl > 1.1.0" >&6;}
+
+ if test "x${PBX_OPENSSL}" != "x1" -a "${USE_OPENSSL}" != "no"; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for OPENSSL" >&5
+$as_echo_n "checking for OPENSSL... " >&6; }
+
+if test -n "$OPENSSL_CFLAGS"; then
+ pkg_cv_OPENSSL_CFLAGS="$OPENSSL_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl >= 1.1.0\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "openssl >= 1.1.0") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_OPENSSL_CFLAGS=`$PKG_CONFIG --cflags "openssl >= 1.1.0" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$OPENSSL_LIBS"; then
+ pkg_cv_OPENSSL_LIBS="$OPENSSL_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl >= 1.1.0\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "openssl >= 1.1.0") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_OPENSSL_LIBS=`$PKG_CONFIG --libs "openssl >= 1.1.0" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ OPENSSL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "openssl >= 1.1.0" 2>&1`
+ else
+ OPENSSL_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "openssl >= 1.1.0" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$OPENSSL_PKG_ERRORS" >&5
+
+
+ PBX_OPENSSL=0
+
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+ PBX_OPENSSL=0
+
+
+else
+ OPENSSL_CFLAGS=$pkg_cv_OPENSSL_CFLAGS
+ OPENSSL_LIBS=$pkg_cv_OPENSSL_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+ PBX_OPENSSL=1
+ OPENSSL_INCLUDE=$(echo ${OPENSSL_CFLAGS} | $SED -e "s|-std=c99||g")
+ OPENSSL_LIB="$OPENSSL_LIBS"
+
+$as_echo "#define HAVE_OPENSSL 1" >>confdefs.h
+
+
+fi
+ fi
+
+ if test $PBX_OPENSSL -eq 0 ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether alternate openssl11 is installed" >&5
+$as_echo "$as_me: checking whether alternate openssl11 is installed" >&6;}
+
+ if test "x${PBX_OPENSSL}" != "x1" -a "${USE_OPENSSL}" != "no"; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for OPENSSL" >&5
+$as_echo_n "checking for OPENSSL... " >&6; }
+
+if test -n "$OPENSSL_CFLAGS"; then
+ pkg_cv_OPENSSL_CFLAGS="$OPENSSL_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl11\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "openssl11") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_OPENSSL_CFLAGS=`$PKG_CONFIG --cflags "openssl11" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$OPENSSL_LIBS"; then
+ pkg_cv_OPENSSL_LIBS="$OPENSSL_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl11\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "openssl11") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_OPENSSL_LIBS=`$PKG_CONFIG --libs "openssl11" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ OPENSSL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "openssl11" 2>&1`
+ else
+ OPENSSL_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "openssl11" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$OPENSSL_PKG_ERRORS" >&5
+
+
+ PBX_OPENSSL=0
+
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+ PBX_OPENSSL=0
+
+
+else
+ OPENSSL_CFLAGS=$pkg_cv_OPENSSL_CFLAGS
+ OPENSSL_LIBS=$pkg_cv_OPENSSL_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+ PBX_OPENSSL=1
+ OPENSSL_INCLUDE=$(echo ${OPENSSL_CFLAGS} | $SED -e "s|-std=c99||g")
+ OPENSSL_LIB="$OPENSSL_LIBS"
+
+$as_echo "#define HAVE_OPENSSL 1" >>confdefs.h
+
+
+fi
+ fi
+
+ fi
+ if test $PBX_OPENSSL -eq 1 ; then
+ $as_echo "#define HAVE_OPENSSL_BIO_METHOD 1" >>confdefs.h
+
+ PBX_OPENSSL_BIO_METHOD=1
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking fallback system openssl" >&5
+$as_echo "$as_me: checking fallback system openssl" >&6;}
+
+ if test "x${PBX_OPENSSL}" != "x1" -a "${USE_OPENSSL}" != "no"; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for OPENSSL" >&5
+$as_echo_n "checking for OPENSSL... " >&6; }
+
+if test -n "$OPENSSL_CFLAGS"; then
+ pkg_cv_OPENSSL_CFLAGS="$OPENSSL_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "openssl") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_OPENSSL_CFLAGS=`$PKG_CONFIG --cflags "openssl" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$OPENSSL_LIBS"; then
+ pkg_cv_OPENSSL_LIBS="$OPENSSL_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"openssl\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "openssl") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_OPENSSL_LIBS=`$PKG_CONFIG --libs "openssl" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ OPENSSL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "openssl" 2>&1`
+ else
+ OPENSSL_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "openssl" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$OPENSSL_PKG_ERRORS" >&5
+
+
+ PBX_OPENSSL=0
+
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+ PBX_OPENSSL=0
+
+
+else
+ OPENSSL_CFLAGS=$pkg_cv_OPENSSL_CFLAGS
+ OPENSSL_LIBS=$pkg_cv_OPENSSL_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+ PBX_OPENSSL=1
+ OPENSSL_INCLUDE=$(echo ${OPENSSL_CFLAGS} | $SED -e "s|-std=c99||g")
+ OPENSSL_LIB="$OPENSSL_LIBS"
+
+$as_echo "#define HAVE_OPENSSL 1" >>confdefs.h
+
+
+fi
+ fi
+
+ fi
+
+ if test $PBX_OPENSSL -eq 1; then
+ $as_echo "#define HAVE_CRYPTO 1" >>confdefs.h
+
+ PBX_CRYPTO=1
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Checking OPENSSL without pkg-config" >&5
+$as_echo "$as_me: Checking OPENSSL without pkg-config" >&6;}
+
+if test "x${PBX_CRYPTO}" != "x1" -a "${USE_CRYPTO}" != "no"; then
+ pbxlibdir=""
+ # if --with-CRYPTO=DIR has been specified, use it.
+ if test "x${CRYPTO_DIR}" != "x"; then
+ if test -d ${CRYPTO_DIR}/lib; then
+ pbxlibdir="-L${CRYPTO_DIR}/lib"
+ else
+ pbxlibdir="-L${CRYPTO_DIR}"
+ fi
+ fi
+
+ ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
+ CFLAGS="${CFLAGS} "
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AES_encrypt in -lcrypto" >&5
+$as_echo_n "checking for AES_encrypt in -lcrypto... " >&6; }
+if ${ac_cv_lib_crypto_AES_encrypt+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcrypto ${pbxlibdir} $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char AES_encrypt ();
+int
+main ()
+{
+return AES_encrypt ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_crypto_AES_encrypt=yes
+else
+ ac_cv_lib_crypto_AES_encrypt=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_AES_encrypt" >&5
+$as_echo "$ac_cv_lib_crypto_AES_encrypt" >&6; }
+if test "x$ac_cv_lib_crypto_AES_encrypt" = xyes; then :
+ AST_CRYPTO_FOUND=yes
+else
+ AST_CRYPTO_FOUND=no
+fi
+
+ CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
+
+
+ # now check for the header.
+ if test "${AST_CRYPTO_FOUND}" = "yes"; then
+ CRYPTO_LIB="${pbxlibdir} -lcrypto "
+ # if --with-CRYPTO=DIR has been specified, use it.
+ if test "x${CRYPTO_DIR}" != "x"; then
+ CRYPTO_INCLUDE="-I${CRYPTO_DIR}/include"
+ fi
+ CRYPTO_INCLUDE="${CRYPTO_INCLUDE} "
+
+ # check for the header
+ ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
+ CPPFLAGS="${CPPFLAGS} ${CRYPTO_INCLUDE}"
+ ac_fn_c_check_header_mongrel "$LINENO" "openssl/aes.h" "ac_cv_header_openssl_aes_h" "$ac_includes_default"
+if test "x$ac_cv_header_openssl_aes_h" = xyes; then :
+ CRYPTO_HEADER_FOUND=1
+else
+ CRYPTO_HEADER_FOUND=0
+fi
+
+
+ CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
+
+ if test "x${CRYPTO_HEADER_FOUND}" = "x0" ; then
+ CRYPTO_LIB=""
+ CRYPTO_INCLUDE=""
+ else
+
+ PBX_CRYPTO=1
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_CRYPTO 1
+_ACEOF
+
+ fi
+ fi
+fi
+
+
+ if test "$PBX_CRYPTO" = "1";
+ then
+
+if test "x${PBX_OPENSSL}" != "x1" -a "${USE_OPENSSL}" != "no"; then
+ pbxlibdir=""
+ # if --with-OPENSSL=DIR has been specified, use it.
+ if test "x${OPENSSL_DIR}" != "x"; then
+ if test -d ${OPENSSL_DIR}/lib; then
+ pbxlibdir="-L${OPENSSL_DIR}/lib"
+ else
+ pbxlibdir="-L${OPENSSL_DIR}"
+ fi
+ fi
+
+ ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
+ CFLAGS="${CFLAGS} "
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SSL_connect in -lssl" >&5
+$as_echo_n "checking for SSL_connect in -lssl... " >&6; }
+if ${ac_cv_lib_ssl_SSL_connect+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lssl ${pbxlibdir} -lcrypto $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char SSL_connect ();
+int
+main ()
+{
+return SSL_connect ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_ssl_SSL_connect=yes
+else
+ ac_cv_lib_ssl_SSL_connect=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_SSL_connect" >&5
+$as_echo "$ac_cv_lib_ssl_SSL_connect" >&6; }
+if test "x$ac_cv_lib_ssl_SSL_connect" = xyes; then :
+ AST_OPENSSL_FOUND=yes
+else
+ AST_OPENSSL_FOUND=no
+fi
+
+ CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
+
+
+ # now check for the header.
+ if test "${AST_OPENSSL_FOUND}" = "yes"; then
+ OPENSSL_LIB="${pbxlibdir} -lssl -lcrypto"
+ # if --with-OPENSSL=DIR has been specified, use it.
+ if test "x${OPENSSL_DIR}" != "x"; then
+ OPENSSL_INCLUDE="-I${OPENSSL_DIR}/include"
+ fi
+ OPENSSL_INCLUDE="${OPENSSL_INCLUDE} "
+
+ # check for the header
+ ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
+ CPPFLAGS="${CPPFLAGS} ${OPENSSL_INCLUDE}"
+ ac_fn_c_check_header_mongrel "$LINENO" "openssl/ssl.h" "ac_cv_header_openssl_ssl_h" "$ac_includes_default"
+if test "x$ac_cv_header_openssl_ssl_h" = xyes; then :
+ OPENSSL_HEADER_FOUND=1
+else
+ OPENSSL_HEADER_FOUND=0
+fi
+
+
+ CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
+
+ if test "x${OPENSSL_HEADER_FOUND}" = "x0" ; then
+ OPENSSL_LIB=""
+ OPENSSL_INCLUDE=""
+ else
+
+ PBX_OPENSSL=1
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_OPENSSL 1
+_ACEOF
+
+ fi
+ fi
+fi
+
+
+
+if test "x${PBX_OPENSSL_BIO_METHOD}" != "x1" -a "${USE_OPENSSL_BIO_METHOD}" != "no"; then
+ pbxlibdir=""
+ # if --with-OPENSSL_BIO_METHOD=DIR has been specified, use it.
+ if test "x${OPENSSL_BIO_METHOD_DIR}" != "x"; then
+ if test -d ${OPENSSL_BIO_METHOD_DIR}/lib; then
+ pbxlibdir="-L${OPENSSL_BIO_METHOD_DIR}/lib"
+ else
+ pbxlibdir="-L${OPENSSL_BIO_METHOD_DIR}"
+ fi
+ fi
+
+ ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
+ CFLAGS="${CFLAGS} "
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BIO_meth_new in -lssl" >&5
+$as_echo_n "checking for BIO_meth_new in -lssl... " >&6; }
+if ${ac_cv_lib_ssl_BIO_meth_new+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lssl ${pbxlibdir} -lcrypto $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char BIO_meth_new ();
+int
+main ()
+{
+return BIO_meth_new ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_ssl_BIO_meth_new=yes
+else
+ ac_cv_lib_ssl_BIO_meth_new=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_BIO_meth_new" >&5
+$as_echo "$ac_cv_lib_ssl_BIO_meth_new" >&6; }
+if test "x$ac_cv_lib_ssl_BIO_meth_new" = xyes; then :
+ AST_OPENSSL_BIO_METHOD_FOUND=yes
+else
+ AST_OPENSSL_BIO_METHOD_FOUND=no
+fi
+
+ CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
+
+
+ # now check for the header.
+ if test "${AST_OPENSSL_BIO_METHOD_FOUND}" = "yes"; then
+ OPENSSL_BIO_METHOD_LIB="${pbxlibdir} -lssl -lcrypto"
+ # if --with-OPENSSL_BIO_METHOD=DIR has been specified, use it.
+ if test "x${OPENSSL_BIO_METHOD_DIR}" != "x"; then
+ OPENSSL_BIO_METHOD_INCLUDE="-I${OPENSSL_BIO_METHOD_DIR}/include"
+ fi
+ OPENSSL_BIO_METHOD_INCLUDE="${OPENSSL_BIO_METHOD_INCLUDE} "
+
+ # check for the header
+ ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
+ CPPFLAGS="${CPPFLAGS} ${OPENSSL_BIO_METHOD_INCLUDE}"
+ ac_fn_c_check_header_mongrel "$LINENO" "openssl/ssl.h" "ac_cv_header_openssl_ssl_h" "$ac_includes_default"
+if test "x$ac_cv_header_openssl_ssl_h" = xyes; then :
+ OPENSSL_BIO_METHOD_HEADER_FOUND=1
+else
+ OPENSSL_BIO_METHOD_HEADER_FOUND=0
+fi
+
+
+ CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
+
+ if test "x${OPENSSL_BIO_METHOD_HEADER_FOUND}" = "x0" ; then
+ OPENSSL_BIO_METHOD_LIB=""
+ OPENSSL_BIO_METHOD_INCLUDE=""
+ else
+
+ PBX_OPENSSL_BIO_METHOD=1
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_OPENSSL_BIO_METHOD 1
+_ACEOF
+
+ fi
+ fi
+fi
+
+
+ fi
+fi
+if test $PBX_OPENSSL -eq 0 ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: OpenSSL does not seem to be installed" >&5
+$as_echo "$as_me: WARNING: OpenSSL does not seem to be installed" >&2;}
+fi
+
+
if test "$JANSSON_BUNDLED" = "yes" ; then
@@ -9362,6 +10164,7 @@
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
@@ -9653,50 +10456,6 @@
- CRYPTO_DESCRIP="OpenSSL Cryptography"
- CRYPTO_OPTION="crypto"
- PBX_CRYPTO=0
-
-# Check whether --with-crypto was given.
-if test "${with_crypto+set}" = set; then :
- withval=$with_crypto;
- case ${withval} in
- n|no)
- USE_CRYPTO=no
- # -1 is a magic value used by menuselect to know that the package
- # was disabled, other than 'not found'
- PBX_CRYPTO=-1
- ;;
- y|ye|yes)
- ac_mandatory_list="${ac_mandatory_list} CRYPTO"
- ;;
- *)
- CRYPTO_DIR="${withval}"
- ac_mandatory_list="${ac_mandatory_list} CRYPTO"
- ;;
- esac
-
-fi
-
-
-
-
-
-
-
-
-OPENSSL_BIO_METHOD_DESCRIP="OpenSSL BIO Method Support"
-OPENSSL_BIO_METHOD_OPTION=crypto
-OPENSSL_BIO_METHOD_DIR=${CRYPTO_DIR}
-
-PBX_OPENSSL_BIO_METHOD=0
-
-
-
-
-
-
-
DAHDI_DESCRIP="DAHDI"
DAHDI_OPTION="dahdi"
PBX_DAHDI=0
@@ -12400,38 +13159,6 @@
- OPENSSL_DESCRIP="OpenSSL Secure Sockets Layer"
- OPENSSL_OPTION="ssl"
- PBX_OPENSSL=0
-
-# Check whether --with-ssl was given.
-if test "${with_ssl+set}" = set; then :
- withval=$with_ssl;
- case ${withval} in
- n|no)
- USE_OPENSSL=no
- # -1 is a magic value used by menuselect to know that the package
- # was disabled, other than 'not found'
- PBX_OPENSSL=-1
- ;;
- y|ye|yes)
- ac_mandatory_list="${ac_mandatory_list} OPENSSL"
- ;;
- *)
- OPENSSL_DIR="${withval}"
- ac_mandatory_list="${ac_mandatory_list} OPENSSL"
- ;;
- esac
-
-fi
-
-
-
-
-
-
-
-
RT_DESCRIP="Realtime functions"
RT_DIR=${rt_DIR}
@@ -13242,127 +13969,6 @@
done
-
-
-
-
-
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
-$as_echo "$PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
- ac_pt_PKG_CONFIG=$PKG_CONFIG
- # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $ac_pt_PKG_CONFIG in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_pt_PKG_CONFIG" = x; then
- PKG_CONFIG=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- PKG_CONFIG=$ac_pt_PKG_CONFIG
- fi
-else
- PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
- _pkg_min_version=0.9.0
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- PKG_CONFIG=""
- fi
-fi
-
# Find required NetBSD Editline library (libedit).
if test "x${PBX_LIBEDIT}" != "x1" -a "${USE_LIBEDIT}" != "no"; then
@@ -14685,7 +15291,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14731,7 +15337,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14755,7 +15361,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14800,7 +15406,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -14824,7 +15430,7 @@
We can't simply define LARGE_OFF_T to be 9223372036854775807,
since some C++ compilers masquerading as C compilers
incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
&& LARGE_OFF_T % 2147483647 == 1)
? 1 : -1];
@@ -16124,8 +16730,6 @@
if (*(data + i) != *(data3 + i))
return 14;
close (fd);
- free (data);
- free (data3);
return 0;
}
_ACEOF
@@ -31007,299 +31611,6 @@
fi
-
-if test "x${PBX_CRYPTO}" != "x1" -a "${USE_CRYPTO}" != "no"; then
- pbxlibdir=""
- # if --with-CRYPTO=DIR has been specified, use it.
- if test "x${CRYPTO_DIR}" != "x"; then
- if test -d ${CRYPTO_DIR}/lib; then
- pbxlibdir="-L${CRYPTO_DIR}/lib"
- else
- pbxlibdir="-L${CRYPTO_DIR}"
- fi
- fi
-
- ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
- CFLAGS="${CFLAGS} "
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AES_encrypt in -lcrypto" >&5
-$as_echo_n "checking for AES_encrypt in -lcrypto... " >&6; }
-if ${ac_cv_lib_crypto_AES_encrypt+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lcrypto ${pbxlibdir} $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char AES_encrypt ();
-int
-main ()
-{
-return AES_encrypt ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_crypto_AES_encrypt=yes
-else
- ac_cv_lib_crypto_AES_encrypt=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_AES_encrypt" >&5
-$as_echo "$ac_cv_lib_crypto_AES_encrypt" >&6; }
-if test "x$ac_cv_lib_crypto_AES_encrypt" = xyes; then :
- AST_CRYPTO_FOUND=yes
-else
- AST_CRYPTO_FOUND=no
-fi
-
- CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
-
-
- # now check for the header.
- if test "${AST_CRYPTO_FOUND}" = "yes"; then
- CRYPTO_LIB="${pbxlibdir} -lcrypto "
- # if --with-CRYPTO=DIR has been specified, use it.
- if test "x${CRYPTO_DIR}" != "x"; then
- CRYPTO_INCLUDE="-I${CRYPTO_DIR}/include"
- fi
- CRYPTO_INCLUDE="${CRYPTO_INCLUDE} "
-
- # check for the header
- ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
- CPPFLAGS="${CPPFLAGS} ${CRYPTO_INCLUDE}"
- ac_fn_c_check_header_mongrel "$LINENO" "openssl/aes.h" "ac_cv_header_openssl_aes_h" "$ac_includes_default"
-if test "x$ac_cv_header_openssl_aes_h" = xyes; then :
- CRYPTO_HEADER_FOUND=1
-else
- CRYPTO_HEADER_FOUND=0
-fi
-
-
- CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
-
- if test "x${CRYPTO_HEADER_FOUND}" = "x0" ; then
- CRYPTO_LIB=""
- CRYPTO_INCLUDE=""
- else
-
- PBX_CRYPTO=1
- cat >>confdefs.h <<_ACEOF
-#define HAVE_CRYPTO 1
-_ACEOF
-
- fi
- fi
-fi
-
-
-
-if test "$PBX_CRYPTO" = "1";
-then
-
-if test "x${PBX_OPENSSL}" != "x1" -a "${USE_OPENSSL}" != "no"; then
- pbxlibdir=""
- # if --with-OPENSSL=DIR has been specified, use it.
- if test "x${OPENSSL_DIR}" != "x"; then
- if test -d ${OPENSSL_DIR}/lib; then
- pbxlibdir="-L${OPENSSL_DIR}/lib"
- else
- pbxlibdir="-L${OPENSSL_DIR}"
- fi
- fi
-
- ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
- CFLAGS="${CFLAGS} "
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SSL_connect in -lssl" >&5
-$as_echo_n "checking for SSL_connect in -lssl... " >&6; }
-if ${ac_cv_lib_ssl_SSL_connect+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lssl ${pbxlibdir} -lcrypto $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char SSL_connect ();
-int
-main ()
-{
-return SSL_connect ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ssl_SSL_connect=yes
-else
- ac_cv_lib_ssl_SSL_connect=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_SSL_connect" >&5
-$as_echo "$ac_cv_lib_ssl_SSL_connect" >&6; }
-if test "x$ac_cv_lib_ssl_SSL_connect" = xyes; then :
- AST_OPENSSL_FOUND=yes
-else
- AST_OPENSSL_FOUND=no
-fi
-
- CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
-
-
- # now check for the header.
- if test "${AST_OPENSSL_FOUND}" = "yes"; then
- OPENSSL_LIB="${pbxlibdir} -lssl -lcrypto"
- # if --with-OPENSSL=DIR has been specified, use it.
- if test "x${OPENSSL_DIR}" != "x"; then
- OPENSSL_INCLUDE="-I${OPENSSL_DIR}/include"
- fi
- OPENSSL_INCLUDE="${OPENSSL_INCLUDE} "
-
- # check for the header
- ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
- CPPFLAGS="${CPPFLAGS} ${OPENSSL_INCLUDE}"
- ac_fn_c_check_header_mongrel "$LINENO" "openssl/ssl.h" "ac_cv_header_openssl_ssl_h" "$ac_includes_default"
-if test "x$ac_cv_header_openssl_ssl_h" = xyes; then :
- OPENSSL_HEADER_FOUND=1
-else
- OPENSSL_HEADER_FOUND=0
-fi
-
-
- CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
-
- if test "x${OPENSSL_HEADER_FOUND}" = "x0" ; then
- OPENSSL_LIB=""
- OPENSSL_INCLUDE=""
- else
-
- PBX_OPENSSL=1
- cat >>confdefs.h <<_ACEOF
-#define HAVE_OPENSSL 1
-_ACEOF
-
- fi
- fi
-fi
-
-
-
-if test "x${PBX_OPENSSL_BIO_METHOD}" != "x1" -a "${USE_OPENSSL_BIO_METHOD}" != "no"; then
- pbxlibdir=""
- # if --with-OPENSSL_BIO_METHOD=DIR has been specified, use it.
- if test "x${OPENSSL_BIO_METHOD_DIR}" != "x"; then
- if test -d ${OPENSSL_BIO_METHOD_DIR}/lib; then
- pbxlibdir="-L${OPENSSL_BIO_METHOD_DIR}/lib"
- else
- pbxlibdir="-L${OPENSSL_BIO_METHOD_DIR}"
- fi
- fi
-
- ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
- CFLAGS="${CFLAGS} "
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BIO_meth_new in -lssl" >&5
-$as_echo_n "checking for BIO_meth_new in -lssl... " >&6; }
-if ${ac_cv_lib_ssl_BIO_meth_new+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lssl ${pbxlibdir} -lcrypto $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char BIO_meth_new ();
-int
-main ()
-{
-return BIO_meth_new ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ssl_BIO_meth_new=yes
-else
- ac_cv_lib_ssl_BIO_meth_new=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_BIO_meth_new" >&5
-$as_echo "$ac_cv_lib_ssl_BIO_meth_new" >&6; }
-if test "x$ac_cv_lib_ssl_BIO_meth_new" = xyes; then :
- AST_OPENSSL_BIO_METHOD_FOUND=yes
-else
- AST_OPENSSL_BIO_METHOD_FOUND=no
-fi
-
- CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
-
-
- # now check for the header.
- if test "${AST_OPENSSL_BIO_METHOD_FOUND}" = "yes"; then
- OPENSSL_BIO_METHOD_LIB="${pbxlibdir} -lssl -lcrypto"
- # if --with-OPENSSL_BIO_METHOD=DIR has been specified, use it.
- if test "x${OPENSSL_BIO_METHOD_DIR}" != "x"; then
- OPENSSL_BIO_METHOD_INCLUDE="-I${OPENSSL_BIO_METHOD_DIR}/include"
- fi
- OPENSSL_BIO_METHOD_INCLUDE="${OPENSSL_BIO_METHOD_INCLUDE} "
-
- # check for the header
- ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
- CPPFLAGS="${CPPFLAGS} ${OPENSSL_BIO_METHOD_INCLUDE}"
- ac_fn_c_check_header_mongrel "$LINENO" "openssl/ssl.h" "ac_cv_header_openssl_ssl_h" "$ac_includes_default"
-if test "x$ac_cv_header_openssl_ssl_h" = xyes; then :
- OPENSSL_BIO_METHOD_HEADER_FOUND=1
-else
- OPENSSL_BIO_METHOD_HEADER_FOUND=0
-fi
-
-
- CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
-
- if test "x${OPENSSL_BIO_METHOD_HEADER_FOUND}" = "x0" ; then
- OPENSSL_BIO_METHOD_LIB=""
- OPENSSL_BIO_METHOD_INCLUDE=""
- else
-
- PBX_OPENSSL_BIO_METHOD=1
- cat >>confdefs.h <<_ACEOF
-#define HAVE_OPENSSL_BIO_METHOD 1
-_ACEOF
-
- fi
- fi
-fi
-
-
-fi
-
if test "$PBX_OPENSSL" = "1";
then
diff --git a/configure.ac b/configure.ac
index d0c3976..6e814e2 100644
--- a/configure.ac
+++ b/configure.ac
@@ -313,6 +313,8 @@
AC_PATH_PROG([SHA1SUM], [sha1sum], $ac_aux_dir/build_tools/sha1sum-sh)
AC_PATH_PROG([OPENSSL], [openssl], :)
+PKG_PROG_PKG_CONFIG()
+
AC_CACHE_CHECK([for bison that supports parse-param], [ac_cv_path_BISON2], [
if test "x$BISON" != "x:" ; then
# Create a temporary directory $tmp in $TMPDIR (default /tmp).
@@ -458,6 +460,52 @@
PJPROJECT_BUNDLED=no
fi
+#
+# OpenSSL stuff has to be done here because we want to pass
+# any resulting CFLAGS and LDFLAGS to the bundled pjproject
+# configure done in THIRD_PARTY_CONFIGURE()
+#
+AST_EXT_LIB_SETUP([CRYPTO], [OpenSSL Cryptography], [crypto])
+AST_EXT_LIB_SETUP([OPENSSL], [OpenSSL Secure Sockets Layer], [ssl])
+AST_EXT_LIB_SETUP_OPTIONAL([OPENSSL_BIO_METHOD], [OpenSSL BIO Method Support], [CRYPTO], [crypto])
+
+# If neither --without-ssl (PBX_OPENSSL=-1) nor --without-crypto (PBX_CRYPTO=-1)
+# and there were no directories atdded to --with-ssl and --with-crypto, and
+# pkg-config is installed (which is should be by install_prereq).
+if test "x$PKG_CONFIG" != "x" -a $PBX_OPENSSL -ge 0 -a $PBX_CRYPTO -ge 0 -a "x$OPENSSL_DIR" == "x" ; then
+ AC_MSG_NOTICE(checking OPENSSL with pkg-config)
+ AC_MSG_NOTICE(checking whether system openssl > 1.1.0)
+ AST_PKG_CONFIG_CHECK([OPENSSL], [openssl >= 1.1.0])
+ if test $PBX_OPENSSL -eq 0 ; then
+ AC_MSG_NOTICE(checking whether alternate openssl11 is installed)
+ AST_PKG_CONFIG_CHECK([OPENSSL], [openssl11])
+ fi
+ if test $PBX_OPENSSL -eq 1 ; then
+ AC_DEFINE([HAVE_OPENSSL_BIO_METHOD], 1)
+ PBX_OPENSSL_BIO_METHOD=1
+ else
+ AC_MSG_NOTICE(checking fallback system openssl)
+ AST_PKG_CONFIG_CHECK([OPENSSL], [openssl])
+ fi
+
+ if test $PBX_OPENSSL -eq 1; then
+ AC_DEFINE([HAVE_CRYPTO], 1)
+ PBX_CRYPTO=1
+ fi
+else
+ AC_MSG_NOTICE(Checking OPENSSL without pkg-config)
+ AST_EXT_LIB_CHECK([CRYPTO], [crypto], [AES_encrypt], [openssl/aes.h])
+ if test "$PBX_CRYPTO" = "1";
+ then
+ AST_EXT_LIB_CHECK([OPENSSL], [ssl], [SSL_connect], [openssl/ssl.h], [-lcrypto])
+ AST_EXT_LIB_CHECK([OPENSSL_BIO_METHOD], [ssl], [BIO_meth_new], [openssl/ssl.h], [-lcrypto])
+ fi
+fi
+if test $PBX_OPENSSL -eq 0 ; then
+ AC_MSG_WARN(OpenSSL does not seem to be installed)
+fi
+
+
THIRD_PARTY_CONFIGURE()
# AST_EXT_LIB_SETUP is used to tell configure to handle variables for
@@ -482,8 +530,6 @@
AST_EXT_LIB_SETUP([COROSYNC], [Corosync], [cpg])
AST_EXT_LIB_SETUP_OPTIONAL([COROSYNC_CFG_STATE_TRACK], [A callback only in corosync 1.x], [COROSYNC], [cfg])
AST_EXT_LIB_SETUP([CRYPT], [password and data encryption], [crypt])
-AST_EXT_LIB_SETUP([CRYPTO], [OpenSSL Cryptography], [crypto])
-AST_EXT_LIB_SETUP_OPTIONAL([OPENSSL_BIO_METHOD], [OpenSSL BIO Method Support], [CRYPTO], [crypto])
AST_EXT_LIB_SETUP([DAHDI], [DAHDI], [dahdi])
AST_EXT_LIB_SETUP([FFMPEG], [Ffmpeg and avcodec], [avcodec])
AST_EXT_LIB_SETUP([GSM], [External GSM], [gsm], [, use 'internal' GSM otherwise])
@@ -593,7 +639,6 @@
AST_EXT_LIB_SETUP_OPTIONAL([SRTP_GCM], [SRTP Library AES-128 (GCM) and AES-256 (GCM)], [SRTP], [srtp])
AST_EXT_LIB_SETUP_OPTIONAL([SRTP_SHUTDOWN], [SRTP Library Shutdown Function], [SRTP], [srtp])
AST_EXT_LIB_SETUP_OPTIONAL([SRTP_GET_VERSION], [SRTP Library Version Function], [SRTP], [srtp])
-AST_EXT_LIB_SETUP([OPENSSL], [OpenSSL Secure Sockets Layer], [ssl])
AST_EXT_LIB_SETUP_OPTIONAL([RT], [Realtime functions], [rt])
AST_EXT_LIB_SETUP([SUPPSERV], [mISDN Supplemental Services], [suppserv])
AST_EXT_LIB_SETUP([FREETDS], [FreeTDS], [tds])
@@ -640,8 +685,6 @@
AC_CHECK_HEADERS([arpa/inet.h libintl.h malloc.h netdb.h stddef.h strings.h sys/event.h utime.h])
-PKG_PROG_PKG_CONFIG()
-
# Find required NetBSD Editline library (libedit).
AST_PKG_CONFIG_CHECK(LIBEDIT, libedit)
# some platforms do not list libedit via pkg-config, for example OpenBSD 6.2
@@ -2642,14 +2685,6 @@
AC_CHECK_LIB([crypt], [crypt_r],
[AC_DEFINE([HAVE_CRYPT_R], [1], [Define to 1 if you have the 'crypt_r' function.])])
-AST_EXT_LIB_CHECK([CRYPTO], [crypto], [AES_encrypt], [openssl/aes.h])
-
-if test "$PBX_CRYPTO" = "1";
-then
- AST_EXT_LIB_CHECK([OPENSSL], [ssl], [SSL_connect], [openssl/ssl.h], [-lcrypto])
- AST_EXT_LIB_CHECK([OPENSSL_BIO_METHOD], [ssl], [BIO_meth_new], [openssl/ssl.h], [-lcrypto])
-fi
-
if test "$PBX_OPENSSL" = "1";
then
AST_CHECK_OSPTK([4], [0], [0])
diff --git a/include/asterisk/autoconfig.h.in b/include/asterisk/autoconfig.h.in
index 27c64aa..af6df9d 100644
--- a/include/asterisk/autoconfig.h.in
+++ b/include/asterisk/autoconfig.h.in
@@ -585,7 +585,7 @@
/* Define to 1 if you have the MFR2 library. */
#undef HAVE_OPENR2
-/* Define to 1 if you have the OpenSSL Secure Sockets Layer library. */
+/* Define if your system has the OPENSSL libraries. */
#undef HAVE_OPENSSL
/* Define to 1 if CRYPTO has the OpenSSL BIO Method Support feature. */
diff --git a/makeopts.in b/makeopts.in
index 27a5bdc..61d6437 100644
--- a/makeopts.in
+++ b/makeopts.in
@@ -239,6 +239,7 @@
PJPROJECT_INCLUDE=@PJPROJECT_INCLUDE@
PJPROJECT_LIB=@PJPROJECT_LIB@
PJPROJECT_DIR=@PJPROJECT_DIR@
+PJPROJECT_CONFIGURE_OPTS=@PJPROJECT_CONFIGURE_OPTS@
POPT_INCLUDE=@POPT_INCLUDE@
POPT_LIB=@POPT_LIB@
diff --git a/menuselect/configure b/menuselect/configure
index 1d15c1c..9986b4f 100755
--- a/menuselect/configure
+++ b/menuselect/configure
@@ -696,6 +696,7 @@
docdir
oldincludedir
includedir
+runstatedir
localstatedir
sharedstatedir
sysconfdir
@@ -777,6 +778,7 @@
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE}'
@@ -1029,6 +1031,15 @@
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
+ -runstatedir | --runstatedir | --runstatedi | --runstated \
+ | --runstate | --runstat | --runsta | --runst | --runs \
+ | --run | --ru | --r)
+ ac_prev=runstatedir ;;
+ -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+ | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+ | --run=* | --ru=* | --r=*)
+ runstatedir=$ac_optarg ;;
+
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1166,7 +1177,7 @@
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
+ libdir localedir mandir runstatedir
do
eval ac_val=\$$ac_var
# Remove trailing slashes.
@@ -1319,6 +1330,7 @@
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
diff --git a/third-party/pjproject/Makefile b/third-party/pjproject/Makefile
index fce2768..96a6491 100644
--- a/third-party/pjproject/Makefile
+++ b/third-party/pjproject/Makefile
@@ -88,8 +88,8 @@
endif
export PJ_CFLAGS := $(filter-out -O% -g%,$(PJ_CFLAGS))
-export CFLAGS += $(CF)
-export LDFLAGS += $(CC_LDFLAGS)
+export CFLAGS += $(CF) $(OPENSSL_INCLUDE)
+export LDFLAGS += $(CC_LDFLAGS) $(OPENSSL_LIB)
ECHO_PREFIX := $(ECHO_PREFIX) echo '[pjproject] '
SHELL_ECHO_PREFIX := echo '[pjproject] '
@@ -129,7 +129,7 @@
$(CMD_PREFIX) $(MAKE) clean $(REALLY_QUIET)
source/build.mak: Makefile.rules source/version.mak source/user.mak $(addprefix source/pjlib/include/pj/,$(notdir $(wildcard patches/*.h))) .rebuild_needed
- $(ECHO_PREFIX) Configuring with $(PJPROJECT_CONFIG_OPTS)
+ $(ECHO_PREFIX) Configuring with $(PJPROJECT_CONFIG_OPTS)
$(CMD_PREFIX) (cd source ; ./aconfigure $(QUIET_CONFIGURE) $(PJPROJECT_CONFIG_OPTS))
build.mak: source/build.mak
diff --git a/third-party/pjproject/configure.m4 b/third-party/pjproject/configure.m4
index 485e4f1..f67ef57 100644
--- a/third-party/pjproject/configure.m4
+++ b/third-party/pjproject/configure.m4
@@ -117,6 +117,7 @@
AC_SUBST([PBX_PJPROJECT])
AC_SUBST([PJPROJECT_LIB])
AC_SUBST([PJPROJECT_INCLUDE])
+ AC_SUBST([PJPROJECT_CONFIGURE_OPTS])
AC_MSG_RESULT(yes)
fi
--
To view, visit https://gerrit.asterisk.org/c/asterisk/+/16618
To unsubscribe, or for help writing mail filters, visit https://gerrit.asterisk.org/settings
Gerrit-Project: asterisk
Gerrit-Branch: 18
Gerrit-Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde
Gerrit-Change-Number: 16618
Gerrit-PatchSet: 1
Gerrit-Owner: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Friendly Automation
Gerrit-Reviewer: George Joseph <gjoseph at digium.com>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-code-review/attachments/20211021/ab797ab9/attachment-0001.html>
More information about the asterisk-code-review
mailing list