[Asterisk-code-review] http.c: Add ability to create multiple HTTP servers (asterisk[19])
Friendly Automation
asteriskteam at digium.com
Wed Dec 15 10:02:40 CST 2021
Friendly Automation has submitted this change. ( https://gerrit.asterisk.org/c/asterisk/+/17682 )
Change subject: http.c: Add ability to create multiple HTTP servers
......................................................................
http.c: Add ability to create multiple HTTP servers
Previously, it was only possible to have one HTTP server in Asterisk.
With this patch it is now possible to have multiple HTTP servers
listening on different addresses.
Note, this behavior has only been made available through an API call
from within the TEST_FRAMEWORK. Specifically, this feature has been
added in order to allow unit test to create/start and stop servers,
if one has not been enabled through configuration.
Change-Id: Ic5fb5f11e62c019a1c51310f4667b32a4dae52f5
---
M include/asterisk/http.h
M main/http.c
2 files changed, 388 insertions(+), 47 deletions(-)
Approvals:
Joshua Colp: Looks good to me, but someone else must approve
George Joseph: Looks good to me, approved
Friendly Automation: Approved for Submit
diff --git a/include/asterisk/http.h b/include/asterisk/http.h
index 033ae2d..2940d9d 100644
--- a/include/asterisk/http.h
+++ b/include/asterisk/http.h
@@ -352,4 +352,51 @@
int ast_http_header_match_in(const char *name, const char *expected_name,
const char *value, const char *expected_value);
+#ifdef TEST_FRAMEWORK
+
+/*!
+ * Currently multiple HTTP servers are only allowed when the TEST_FRAMEWORK
+ * is enabled, so putting this here:
+ *
+ * If a server is listening on 'any' (i.e. 0.0.0.0), and another server attempts
+ * to listen on 'localhost' on the same port (and vice versa) then you'll get an
+ * "Address already in use" error. For now use a different port, or match the
+ * addresses exactly.
+ */
+
+struct ast_http_server;
+
+/*!
+ * \brief Retrieve a HTTP server listening at the given host
+ *
+ * A given host can include the port, e.g. <host>[:<port>]. If no port is specified
+ * then the port defaults to '8088'. If a host parameter is NULL, or empty and a
+ * configured server is already listening then that server is returned. If no
+ * server is and enabled then the host defaults to 'localhost:8088'.
+ *
+ * \note When finished with a successfully returned server object
+ * ast_http_test_server_discard MUST be called on the object
+ * in order for proper 'cleanup' to occur.
+ *
+ * \param name Optional name for the server (default 'http test server')
+ * \param host Optional host, or address with port to bind to (default 'localhost:8088')
+ *
+ * \return a HTTP server object, or NULL on error
+ */
+struct ast_http_server *ast_http_test_server_get(const char *name, const char *host);
+
+/*!
+ * \brief Discard, or drop a HTTP server
+ *
+ * This function MUST eventually be called for every successful call to
+ * ast_http_test_server_get.
+ *
+ * \note NULL tolerant
+ *
+ * \param server The HTTP server to discard
+ */
+void ast_http_test_server_discard(struct ast_http_server *server);
+
+#endif
+
#endif /* _ASTERISK_SRV_H */
diff --git a/main/http.c b/main/http.c
index 78ac8f8..7f1ffe0 100644
--- a/main/http.c
+++ b/main/http.c
@@ -113,18 +113,21 @@
static void *httpd_helper_thread(void *arg);
/*!
- * we have up to two accepting threads, one for http, one for https
+ * For standard configuration we have up to two accepting threads,
+ * one for http, one for https. If TEST_FRAMEWORK is enabled it's
+ * possible to have more than one running http server.
*/
-static struct ast_tcptls_session_args http_desc = {
- .accept_fd = -1,
- .master = AST_PTHREADT_NULL,
- .tls_cfg = NULL,
- .poll_timeout = -1,
- .name = "http server",
- .accept_fn = ast_tcptls_server_root,
- .worker_fn = httpd_helper_thread,
+struct ast_http_server {
+ struct ast_tcptls_session_args args;
+ char *name;
+ char *address;
};
+/*!
+ * The default configured HTTP server
+ */
+struct ast_http_server *global_http_server = NULL;
+
static struct ast_tcptls_session_args https_desc = {
.accept_fd = -1,
.master = AST_PTHREADT_NULL,
@@ -394,9 +397,9 @@
ast_str_append(&out, 0, "<tr><td><i>Server</i></td><td><b>%s</b></td></tr>\r\n", http_server_name);
ast_str_append(&out, 0, "<tr><td><i>Prefix</i></td><td><b>%s</b></td></tr>\r\n", prefix);
ast_str_append(&out, 0, "<tr><td><i>Bind Address</i></td><td><b>%s</b></td></tr>\r\n",
- ast_sockaddr_stringify_addr(&http_desc.old_address));
+ ast_sockaddr_stringify_addr(&global_http_server->args.old_address));
ast_str_append(&out, 0, "<tr><td><i>Bind Port</i></td><td><b>%s</b></td></tr>\r\n",
- ast_sockaddr_stringify_port(&http_desc.old_address));
+ ast_sockaddr_stringify_port(&global_http_server->args.old_address));
if (http_tls_cfg.enabled) {
ast_str_append(&out, 0, "<tr><td><i>SSL Bind Port</i></td><td><b>%s</b></td></tr>\r\n",
ast_sockaddr_stringify_port(&https_desc.old_address));
@@ -2074,6 +2077,293 @@
AST_RWLIST_UNLOCK(&uri_redirects);
}
+/*! \brief Number of HTTP server buckets */
+#define HTTP_SERVER_BUCKETS 5
+
+struct ao2_container *http_servers = NULL;
+
+AO2_STRING_FIELD_HASH_FN(ast_http_server, address);
+AO2_STRING_FIELD_CMP_FN(ast_http_server, address);
+
+static void http_server_destroy(void *obj)
+{
+ struct ast_http_server *server = obj;
+
+ ast_tcptls_server_stop(&server->args);
+
+ ast_verb(1, "Stopped http server '%s' listening at '%s'\n", server->name, server->address);
+
+ ast_free(server->name);
+ ast_free(server->address);
+}
+
+static struct ast_http_server *http_server_create(const char *name, const char *address,
+ const struct ast_sockaddr *addr)
+{
+ struct ast_http_server *server;
+
+ server = ao2_alloc(sizeof(*server), http_server_destroy);
+ if (!server) {
+ ast_log(LOG_ERROR, "Unable to allocate HTTP server '%s' at address '%s'\n",
+ name, address);
+ return NULL;
+ }
+
+ if (!(server->address = ast_strdup(address)) || !(server->name = ast_strdup(name))) {
+ ast_log(LOG_ERROR, "Unable to complete setup for HTTP server '%s' at address '%s'\n",
+ name, address);
+ ao2_ref(server, -1);
+ return NULL;
+ }
+
+ server->args.accept_fd = -1;
+ server->args.master = AST_PTHREADT_NULL;
+ server->args.tls_cfg = NULL;
+ server->args.poll_timeout = -1;
+ server->args.name = server->name;
+ server->args.accept_fn = ast_tcptls_server_root;
+ server->args.worker_fn = httpd_helper_thread;
+
+ ast_sockaddr_copy(&server->args.local_address, addr);
+
+ return server;
+}
+
+static int http_server_start(struct ast_http_server *server)
+{
+ if (server->args.accept_fd != -1) {
+ /* Already running */
+ return 0;
+ }
+
+ ast_tcptls_server_start(&server->args);
+ if (server->args.accept_fd == -1) {
+ ast_log(LOG_WARNING, "Failed to start HTTP server '%s' at address '%s'\n",
+ server->name, server->address);
+ return -1;
+ }
+
+ if (!ao2_link_flags(http_servers, server, OBJ_NOLOCK)) {
+ ast_log(LOG_WARNING, "Failed to link HTTP server '%s' at address '%s'\n",
+ server->name, server->address);
+ return -1;
+ }
+
+ ast_verb(1, "Bound HTTP server '%s' to address %s\n", server->name, server->address);
+
+ return 0;
+}
+
+/*!
+ * \brief Discard/Drop a HTTP server
+ *
+ * Decrements the reference to the given object, and unlinks it from the servers
+ * container if it's the last reference.
+ *
+ * After a server object has been added to the container this method should always
+ * be called to decrement the object's reference instead of the regular ao2 methods.
+ *
+ * \note NULL tolerant
+ *
+ * \param server The server object
+ */
+static void http_server_discard(struct ast_http_server *server)
+{
+ if (!server) {
+ return;
+ }
+
+ /*
+ * If only two references were on the object then the last one is from
+ * the servers container, so remove from container now.
+ */
+ if (ao2_ref(server, -1) == 2) {
+ ao2_unlink(http_servers, server);
+ }
+}
+
+/*!
+ * \brief Retrieve, or create a HTTP server object by sock address
+ *
+ * Look for, and return a matching server object by addr. If an object is not found
+ * then create a new one.
+ *
+ * \note This method should be called with the http_servers container already locked.
+ *
+ * \param name The name of the server
+ * \param addr The address to match on, or create a new object with
+ *
+ * \return a HTTP server object, or NULL on error
+ */
+static struct ast_http_server *http_server_get_by_addr(
+ const char *name, const struct ast_sockaddr *addr)
+{
+ struct ast_http_server *server;
+ const char *address;
+
+ address = ast_sockaddr_stringify(addr);
+ if (ast_strlen_zero(address)) {
+ return NULL;
+ }
+
+ server = ao2_find(http_servers, address, OBJ_KEY | OBJ_NOLOCK);
+
+ return server ?: http_server_create(name, address, addr);
+}
+
+/*!
+ * \brief Retrieve, or create a HTTP server object by host
+ *
+ * Resolve the given host, and then look for, and return a matching server object.
+ * If an object is not found then create a new one.
+ *
+ * \note This method should be called with the http_servers container already locked.
+ *
+ * \param name The name of the server
+ * \param host The host to resolve, and match on or create a new object with
+ * \param port Optional port used if one is not specified with the host (default 8088)
+ *
+ * \return a HTTP server object, or NULL on error
+ */
+static struct ast_http_server *http_server_get_by_host(const char *name, const char *host,
+ uint32_t port)
+{
+ struct ast_sockaddr *addrs = NULL;
+ int num_addrs;
+ int i;
+
+ if (!(num_addrs = ast_sockaddr_resolve(&addrs, host, 0, AST_AF_UNSPEC))) {
+ ast_log(LOG_WARNING, "Unable to resolve host '%s'\n", host);
+ return NULL;
+ }
+
+ if (port == 0) {
+ port = DEFAULT_PORT;
+ }
+
+ for (i = 0; i < num_addrs; ++i) {
+ struct ast_http_server *server;
+
+ /* Use the given port if one was not specified already */
+ if (!ast_sockaddr_port(&addrs[i])) {
+ ast_sockaddr_set_port(&addrs[i], port);
+ }
+
+ server = http_server_get_by_addr(name, &addrs[i]);
+ if (server) {
+ ast_free(addrs);
+ return server;
+ }
+ }
+
+ ast_free(addrs);
+ return NULL;
+}
+
+/*!
+ * \brief Retrieve, or create and start a HTTP server
+ *
+ * Resolve the given host, and retrieve a listening server object. If the server is
+ * not already listening then start it. If a replace_me parameter is given, and it
+ * points to a non-NULL value then that server is discarded and replaced.
+ *
+ * \param name The name of the server
+ * \param host The host to resolve, and match on or create a new object with
+ * \param port Optional port used if one is not specified with the host (default 8088)
+ * \param[out] replace_me Optional server to be replaced
+ *
+ * \note If replace_me is specified the returned value is always the same as what's
+ * passed back out in the variable.
+ *
+ * \return a HTTP server object, or NULL on error
+ */
+static struct ast_http_server *http_server_get(const char *name, const char *host,
+ uint32_t port, struct ast_http_server **replace_me)
+{
+ struct ast_http_server *server;
+
+ ao2_lock(http_servers);
+
+ server = http_server_get_by_host(name, host, port);
+
+ if (replace_me) {
+ /* Only replace if different */
+ if (*replace_me == server) {
+ ao2_cleanup(server);
+ ao2_unlock(http_servers);
+ return *replace_me;
+ }
+
+ if (*replace_me) {
+ http_server_discard(*replace_me);
+ }
+
+ *replace_me = server;
+ }
+
+ if (server && http_server_start(server)) {
+ if (replace_me) {
+ *replace_me = NULL;
+ }
+
+ ao2_ref(server, -1);
+ server = NULL;
+ }
+
+ ao2_unlock(http_servers);
+ return server;
+}
+
+#ifdef TEST_FRAMEWORK
+
+struct ast_http_server *ast_http_test_server_get(const char *name, const char *host)
+{
+ struct ast_http_server *server;
+
+ /*
+ * Currently multiple HTTP servers are only allowed when the TEST_FRAMEWORK
+ * is enabled, leaving the follow 'todos' if they become a problem or if this
+ * ability moves outside the TEST_FRAMEWORK.
+ *
+ * TODO: Add locking around global_http_server use. If this module is reloading
+ * it's possible for the global_http_server to exist here, and then become
+ * NULL between the check and return.
+ *
+ * TODO: Make it so 'localhost' and 'any' addresses equate.
+ */
+
+ if (ast_strlen_zero(host)) {
+ /* Use configured server if one available */
+ if (global_http_server) {
+ ast_module_ref(ast_module_info->self);
+ return ao2_bump(global_http_server);
+ }
+
+ host = "localhost:8088";
+ }
+
+ if (!name) {
+ name = "http test server";
+ }
+
+ server = http_server_get(name, host, 0, NULL);
+ if (server) {
+ ast_module_ref(ast_module_info->self);
+ }
+
+ return server;
+}
+
+void ast_http_test_server_discard(struct ast_http_server *server)
+{
+ if (server) {
+ http_server_discard(server);
+ ast_module_unref(ast_module_info->self);
+ }
+}
+
+#endif
+
static int __ast_http_load(int reload)
{
struct ast_config *cfg;
@@ -2086,9 +2376,8 @@
struct http_uri_redirect *redirect;
struct ast_flags config_flags = { reload ? CONFIG_FLAG_FILEUNCHANGED : 0 };
uint32_t bindport = DEFAULT_PORT;
- RAII_VAR(struct ast_sockaddr *, addrs, NULL, ast_free);
- int num_addrs = 0;
int http_tls_was_enabled = 0;
+ char *bindaddr = NULL;
cfg = ast_config_load2("http.conf", "http", config_flags);
if (!cfg || cfg == CONFIG_STATUS_FILEINVALID) {
@@ -2169,9 +2458,7 @@
v->value, DEFAULT_PORT);
}
} else if (!strcasecmp(v->name, "bindaddr")) {
- if (!(num_addrs = ast_sockaddr_resolve(&addrs, v->value, 0, AST_AF_UNSPEC))) {
- ast_log(LOG_WARNING, "Invalid bind address %s\n", v->value);
- }
+ bindaddr = ast_strdupa(v->value);
} else if (!strcasecmp(v->name, "prefix")) {
if (!ast_strlen_zero(v->value)) {
newprefix[0] = '/';
@@ -2213,34 +2500,27 @@
ast_copy_string(http_server_name, server_name, sizeof(http_server_name));
- if (num_addrs && enabled) {
- int i;
- for (i = 0; i < num_addrs; ++i) {
- ast_sockaddr_copy(&http_desc.local_address, &addrs[i]);
- if (!ast_sockaddr_port(&http_desc.local_address)) {
- ast_sockaddr_set_port(&http_desc.local_address, bindport);
- }
- ast_tcptls_server_start(&http_desc);
- if (http_desc.accept_fd == -1) {
- ast_log(LOG_WARNING, "Failed to start HTTP server for address %s\n", ast_sockaddr_stringify(&addrs[i]));
- ast_sockaddr_setnull(&http_desc.local_address);
- } else {
- ast_verb(1, "Bound HTTP server to address %s\n", ast_sockaddr_stringify(&addrs[i]));
- break;
- }
- }
- /* When no specific TLS bindaddr is specified, we just use
- * the non-TLS bindaddress here.
- */
- if (ast_sockaddr_isnull(&https_desc.local_address) && http_desc.accept_fd != -1) {
- ast_sockaddr_copy(&https_desc.local_address, &http_desc.local_address);
- /* Of course, we can't use the same port though.
- * Since no bind address was specified, we just use the
- * default TLS port
- */
- ast_sockaddr_set_port(&https_desc.local_address, DEFAULT_TLS_PORT);
- }
+ if (enabled) {
+ http_server_get("http server", bindaddr, bindport, &global_http_server);
+ } else if (global_http_server) {
+ http_server_discard(global_http_server);
+ global_http_server = NULL;
}
+
+ /* When no specific TLS bindaddr is specified, we just use
+ * the non-TLS bindaddress here.
+ */
+ if (global_http_server && ast_sockaddr_isnull(&https_desc.local_address) &&
+ global_http_server->args.accept_fd != -1) {
+
+ ast_sockaddr_copy(&https_desc.local_address, &global_http_server->args.local_address);
+ /* Of course, we can't use the same port though.
+ * Since no bind address was specified, we just use the
+ * default TLS port
+ */
+ ast_sockaddr_set_port(&https_desc.local_address, DEFAULT_TLS_PORT);
+ }
+
if (http_tls_was_enabled && !http_tls_cfg.enabled) {
ast_tcptls_server_stop(&https_desc);
} else if (http_tls_cfg.enabled && !ast_sockaddr_isnull(&https_desc.local_address)) {
@@ -2298,11 +2578,11 @@
ast_cli(a->fd, "HTTP Server Status:\n");
ast_cli(a->fd, "Prefix: %s\n", prefix);
ast_cli(a->fd, "Server: %s\n", http_server_name);
- if (ast_sockaddr_isnull(&http_desc.old_address)) {
+ if (!global_http_server) {
ast_cli(a->fd, "Server Disabled\n\n");
} else {
ast_cli(a->fd, "Server Enabled and Bound to %s\n\n",
- ast_sockaddr_stringify(&http_desc.old_address));
+ ast_sockaddr_stringify(&global_http_server->args.old_address));
if (http_tls_cfg.enabled) {
ast_cli(a->fd, "HTTPS Server Enabled and Bound to %s\n\n",
ast_sockaddr_stringify(&https_desc.old_address));
@@ -2345,7 +2625,9 @@
struct http_uri_redirect *redirect;
ast_cli_unregister_multiple(cli_http, ARRAY_LEN(cli_http));
- ast_tcptls_server_stop(&http_desc);
+ ao2_cleanup(global_http_server);
+ ao2_cleanup(http_servers);
+
if (http_tls_cfg.enabled) {
ast_tcptls_server_stop(&https_desc);
}
@@ -2375,7 +2657,19 @@
{
ast_cli_register_multiple(cli_http, ARRAY_LEN(cli_http));
- return __ast_http_load(0) ? AST_MODULE_LOAD_FAILURE : AST_MODULE_LOAD_SUCCESS;
+ http_servers = ao2_container_alloc_hash(AO2_ALLOC_OPT_LOCK_MUTEX, 0,
+ HTTP_SERVER_BUCKETS, ast_http_server_hash_fn, NULL, ast_http_server_cmp_fn);
+ if (!http_servers) {
+ return AST_MODULE_LOAD_FAILURE;
+ }
+
+ if (__ast_http_load(0)) {
+ ao2_cleanup(http_servers);
+ http_servers = NULL;
+ return AST_MODULE_LOAD_FAILURE;
+ }
+
+ return AST_MODULE_LOAD_SUCCESS;
}
AST_MODULE_INFO(ASTERISK_GPL_KEY, AST_MODFLAG_GLOBAL_SYMBOLS | AST_MODFLAG_LOAD_ORDER, "Built-in HTTP Server",
--
To view, visit https://gerrit.asterisk.org/c/asterisk/+/17682
To unsubscribe, or for help writing mail filters, visit https://gerrit.asterisk.org/settings
Gerrit-Project: asterisk
Gerrit-Branch: 19
Gerrit-Change-Id: Ic5fb5f11e62c019a1c51310f4667b32a4dae52f5
Gerrit-Change-Number: 17682
Gerrit-PatchSet: 2
Gerrit-Owner: Kevin Harwell <kharwell at digium.com>
Gerrit-Reviewer: Friendly Automation
Gerrit-Reviewer: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Joshua Colp <jcolp at sangoma.com>
Gerrit-MessageType: merged
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-code-review/attachments/20211215/f9a6674d/attachment-0001.html>
More information about the asterisk-code-review
mailing list