[Asterisk-code-review] BuildSystem: With external editline, do not require libs for... (asterisk[15])
Jenkins2
asteriskteam at digium.com
Mon Apr 2 08:45:29 CDT 2018
Jenkins2 has submitted this change and it was merged. ( https://gerrit.asterisk.org/8630 )
Change subject: BuildSystem: With external editline, do not require libs for internal editline.
......................................................................
BuildSystem: With external editline, do not require libs for internal editline.
ASTERISK-27761
Change-Id: Ib17a7415297a210cfcdbf149e4df9b6edadbfab6
---
M configure
M configure.ac
2 files changed, 448 insertions(+), 310 deletions(-)
Approvals:
Corey Farrell: Looks good to me, but someone else must approve
Joshua Colp: Looks good to me, approved
Jenkins2: Approved for Submit
diff --git a/configure b/configure
index 5be181d..7524958 100755
--- a/configure
+++ b/configure
@@ -672,17 +672,11 @@
CONFIG_MYSQLCLIENT
PBX_MISDN_FAC_ERROR
PBX_MISDN_FAC_RESULT
-LIBEDIT_LIBS
-LIBEDIT_CFLAGS
-LIBEDIT_INTERNAL
ILBC_LIBS
ILBC_CFLAGS
ILBC_INTERNAL
GSM_INTERNAL
PBX_DAHDI_HALF_FULL
-PKG_CONFIG_LIBDIR
-PKG_CONFIG_PATH
-PKG_CONFIG
PBX_DLADDR
PBX_IP_MTU_DISCOVER
PBX_RTLD_NOLOAD
@@ -714,6 +708,12 @@
UUID_LIB
UUID_INCLUDE
EDITLINE_LIB
+LIBEDIT_LIBS
+LIBEDIT_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+LIBEDIT_INTERNAL
ALLOCA
PBX_ZLIB
ZLIB_DIR
@@ -1470,10 +1470,10 @@
PKG_CONFIG
PKG_CONFIG_PATH
PKG_CONFIG_LIBDIR
-ILBC_CFLAGS
-ILBC_LIBS
LIBEDIT_CFLAGS
LIBEDIT_LIBS
+ILBC_CFLAGS
+ILBC_LIBS
PJPROJECT_CFLAGS
PJPROJECT_LIBS
PYTHONDEV_CFLAGS
@@ -2224,12 +2224,12 @@
directories to add to pkg-config's search path
PKG_CONFIG_LIBDIR
path overriding pkg-config's built-in search path
- ILBC_CFLAGS C compiler flags for ILBC, overriding pkg-config
- ILBC_LIBS linker flags for ILBC, overriding pkg-config
LIBEDIT_CFLAGS
C compiler flags for LIBEDIT, overriding pkg-config
LIBEDIT_LIBS
linker flags for LIBEDIT, overriding pkg-config
+ ILBC_CFLAGS C compiler flags for ILBC, overriding pkg-config
+ ILBC_LIBS linker flags for ILBC, overriding pkg-config
PJPROJECT_CFLAGS
C compiler flags for PJPROJECT, overriding pkg-config
PJPROJECT_LIBS
@@ -13345,7 +13345,377 @@
done
-# Any one of these packages support a mandatory requirement, so we want to check on them as early as possible.
+# Find required NetBSD Editline library (libedit).
+EDITLINE_LIB=""
+LIBEDIT_INTERNAL="yes"
+
+LIBEDIT_SYSTEM="yes"
+if test "${USE_LIBEDIT}" != "no"; then
+ if test "${LIBEDIT_DIR}" = "internal"; then
+ LIBEDIT_SYSTEM="no"
+ elif test "${LIBEDIT_DIR}" != ""; then
+ LIBEDIT_INTERNAL="no"
+ fi
+ if test "${LIBEDIT_SYSTEM}" = "yes"; then
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+ ac_pt_PKG_CONFIG=$PKG_CONFIG
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ac_pt_PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_pt_PKG_CONFIG" = x; then
+ PKG_CONFIG=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ PKG_CONFIG=$ac_pt_PKG_CONFIG
+ fi
+else
+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=0.9.0
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ PKG_CONFIG=""
+ fi
+fi
+
+ if test "x${PBX_LIBEDIT}" != "x1" -a "${USE_LIBEDIT}" != "no"; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBEDIT" >&5
+$as_echo_n "checking for LIBEDIT... " >&6; }
+
+if test -n "$LIBEDIT_CFLAGS"; then
+ pkg_cv_LIBEDIT_CFLAGS="$LIBEDIT_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libedit\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libedit") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_LIBEDIT_CFLAGS=`$PKG_CONFIG --cflags "libedit" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$LIBEDIT_LIBS"; then
+ pkg_cv_LIBEDIT_LIBS="$LIBEDIT_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libedit\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libedit") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_LIBEDIT_LIBS=`$PKG_CONFIG --libs "libedit" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ LIBEDIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libedit" 2>&1`
+ else
+ LIBEDIT_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libedit" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$LIBEDIT_PKG_ERRORS" >&5
+
+
+ PBX_LIBEDIT=0
+
+
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+ PBX_LIBEDIT=0
+
+
+else
+ LIBEDIT_CFLAGS=$pkg_cv_LIBEDIT_CFLAGS
+ LIBEDIT_LIBS=$pkg_cv_LIBEDIT_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+ PBX_LIBEDIT=1
+ LIBEDIT_INCLUDE="$LIBEDIT_CFLAGS"
+ LIBEDIT_LIB="$LIBEDIT_LIBS"
+
+$as_echo "#define HAVE_LIBEDIT 1" >>confdefs.h
+
+
+fi
+ fi
+
+ # some platforms do not list libedit via pkg-config, for example OpenBSD 6.2
+
+if test "x${PBX_LIBEDIT}" != "x1" -a "${USE_LIBEDIT}" != "no"; then
+ pbxlibdir=""
+ # if --with-LIBEDIT=DIR has been specified, use it.
+ if test "x${LIBEDIT_DIR}" != "x"; then
+ if test -d ${LIBEDIT_DIR}/lib; then
+ pbxlibdir="-L${LIBEDIT_DIR}/lib"
+ else
+ pbxlibdir="-L${LIBEDIT_DIR}"
+ fi
+ fi
+
+ ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
+ CFLAGS="${CFLAGS} "
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for history_init in -ledit" >&5
+$as_echo_n "checking for history_init in -ledit... " >&6; }
+if ${ac_cv_lib_edit_history_init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ledit ${pbxlibdir} -ltermcap $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char history_init ();
+int
+main ()
+{
+return history_init ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_edit_history_init=yes
+else
+ ac_cv_lib_edit_history_init=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_edit_history_init" >&5
+$as_echo "$ac_cv_lib_edit_history_init" >&6; }
+if test "x$ac_cv_lib_edit_history_init" = xyes; then :
+ AST_LIBEDIT_FOUND=yes
+else
+ AST_LIBEDIT_FOUND=no
+fi
+
+ CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
+
+
+ # now check for the header.
+ if test "${AST_LIBEDIT_FOUND}" = "yes"; then
+ LIBEDIT_LIB="${pbxlibdir} -ledit -ltermcap"
+ # if --with-LIBEDIT=DIR has been specified, use it.
+ if test "x${LIBEDIT_DIR}" != "x"; then
+ LIBEDIT_INCLUDE="-I${LIBEDIT_DIR}/include"
+ fi
+ LIBEDIT_INCLUDE="${LIBEDIT_INCLUDE} "
+
+ # check for the header
+ ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
+ CPPFLAGS="${CPPFLAGS} ${LIBEDIT_INCLUDE}"
+ ac_fn_c_check_header_mongrel "$LINENO" "histedit.h" "ac_cv_header_histedit_h" "$ac_includes_default"
+if test "x$ac_cv_header_histedit_h" = xyes; then :
+ LIBEDIT_HEADER_FOUND=1
+else
+ LIBEDIT_HEADER_FOUND=0
+fi
+
+
+ CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
+
+ if test "x${LIBEDIT_HEADER_FOUND}" = "x0" ; then
+ LIBEDIT_LIB=""
+ LIBEDIT_INCLUDE=""
+ else
+
+ PBX_LIBEDIT=1
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBEDIT 1
+_ACEOF
+
+ fi
+ fi
+fi
+
+
+ if test "$PBX_LIBEDIT" = "1"; then
+ LIBEDIT_INTERNAL="no"
+ fi
+ fi
+ if test "${LIBEDIT_INTERNAL}" = "yes"; then
+ PBX_LIBEDIT=1
+ LIBEDIT_IS_UNICODE=no
+ else
+
+ if test "x${PBX_LIBEDIT_IS_UNICODE}" != "x1" -a "${USE_LIBEDIT_IS_UNICODE}" != "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Testing for libedit unicode support" >&5
+$as_echo_n "checking for Testing for libedit unicode support... " >&6; }
+ saved_cppflags="${CPPFLAGS}"
+ if test "x${LIBEDIT_IS_UNICODE_DIR}" != "x"; then
+ LIBEDIT_IS_UNICODE_INCLUDE="-I${LIBEDIT_IS_UNICODE_DIR}/include"
+ fi
+ CPPFLAGS="${CPPFLAGS} ${LIBEDIT_IS_UNICODE_INCLUDE}"
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+ #include <histedit.h>
+int
+main ()
+{
+ el_rfunc_t *callback;;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ PBX_LIBEDIT_IS_UNICODE=1
+
+$as_echo "#define HAVE_LIBEDIT_IS_UNICODE 1" >>confdefs.h
+
+
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CPPFLAGS="${saved_cppflags}"
+ fi
+
+ fi
+fi
+# If the Asterisk internal copy should be build (user said so) or
+# must be build (system does not have it), either -ltermcap,
+# -ltinfo, or -l{n}curses must be available.
+if test "${LIBEDIT_INTERNAL}" = "yes"; then
if test "x${PBX_TERMCAP}" != "x1" -a "${USE_TERMCAP}" != "no"; then
pbxlibdir=""
@@ -13432,6 +13802,9 @@
fi
+ if test "x$TERMCAP_LIB" != "x" ; then
+ EDITLINE_LIB="$TERMCAP_LIB"
+ else
if test "x${PBX_TINFO}" != "x1" -a "${USE_TINFO}" != "no"; then
pbxlibdir=""
@@ -13518,6 +13891,9 @@
fi
+ if test "x$TINFO_LIB" != "x" ; then
+ EDITLINE_LIB="$TINFO_LIB"
+ else
if test "x${PBX_CURSES}" != "x1" -a "${USE_CURSES}" != "no"; then
pbxlibdir=""
@@ -13614,6 +13990,9 @@
fi
+ if test "x$CURSES_LIB" != "x" ; then
+ EDITLINE_LIB="$CURSES_LIB"
+ else
if test "x${PBX_NCURSES}" != "x1" -a "${USE_NCURSES}" != "no"; then
pbxlibdir=""
@@ -13710,18 +14089,14 @@
fi
-
-EDITLINE_LIB=""
-if test "x$TERMCAP_LIB" != "x" ; then
- EDITLINE_LIB="$TERMCAP_LIB"
-elif test "x$TINFO_LIB" != "x" ; then
- EDITLINE_LIB="$TINFO_LIB"
-elif test "x$CURSES_LIB" != "x" ; then
- EDITLINE_LIB="$CURSES_LIB"
-elif test "x$NCURSES_LIB" != "x" ; then
- EDITLINE_LIB="$NCURSES_LIB"
-else
- as_fn_error $? "*** termcap support not found (on modern systems, this typically means the ncurses development package is missing)" "$LINENO" 5
+ if test "x$NCURSES_LIB" != "x" ; then
+ EDITLINE_LIB="$NCURSES_LIB"
+ else
+ as_fn_error $? "*** termcap support not found (on modern systems, this typically means the ncurses development package is missing)" "$LINENO" 5
+ fi
+ fi
+ fi
+ fi
fi
@@ -20633,252 +21008,6 @@
fi
if test "${ILBC_INTERNAL}" = "yes"; then
PBX_ILBC=1
- fi
-fi
-
-LIBEDIT_INTERNAL="yes"
-
-LIBEDIT_SYSTEM="yes"
-if test "${USE_LIBEDIT}" != "no"; then
- if test "${LIBEDIT_DIR}" = "internal"; then
- LIBEDIT_SYSTEM="no"
- elif test "${LIBEDIT_DIR}" != ""; then
- LIBEDIT_INTERNAL="no"
- fi
- if test "${LIBEDIT_SYSTEM}" = "yes"; then
-
- if test "x${PBX_LIBEDIT}" != "x1" -a "${USE_LIBEDIT}" != "no"; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBEDIT" >&5
-$as_echo_n "checking for LIBEDIT... " >&6; }
-
-if test -n "$LIBEDIT_CFLAGS"; then
- pkg_cv_LIBEDIT_CFLAGS="$LIBEDIT_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libedit\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libedit") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_LIBEDIT_CFLAGS=`$PKG_CONFIG --cflags "libedit" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-if test -n "$LIBEDIT_LIBS"; then
- pkg_cv_LIBEDIT_LIBS="$LIBEDIT_LIBS"
- elif test -n "$PKG_CONFIG"; then
- if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libedit\""; } >&5
- ($PKG_CONFIG --exists --print-errors "libedit") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- pkg_cv_LIBEDIT_LIBS=`$PKG_CONFIG --libs "libedit" 2>/dev/null`
- test "x$?" != "x0" && pkg_failed=yes
-else
- pkg_failed=yes
-fi
- else
- pkg_failed=untried
-fi
-
-
-
-if test $pkg_failed = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
- _pkg_short_errors_supported=yes
-else
- _pkg_short_errors_supported=no
-fi
- if test $_pkg_short_errors_supported = yes; then
- LIBEDIT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libedit" 2>&1`
- else
- LIBEDIT_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libedit" 2>&1`
- fi
- # Put the nasty error message in config.log where it belongs
- echo "$LIBEDIT_PKG_ERRORS" >&5
-
-
- PBX_LIBEDIT=0
-
-
-elif test $pkg_failed = untried; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
- PBX_LIBEDIT=0
-
-
-else
- LIBEDIT_CFLAGS=$pkg_cv_LIBEDIT_CFLAGS
- LIBEDIT_LIBS=$pkg_cv_LIBEDIT_LIBS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
- PBX_LIBEDIT=1
- LIBEDIT_INCLUDE="$LIBEDIT_CFLAGS"
- LIBEDIT_LIB="$LIBEDIT_LIBS"
-
-$as_echo "#define HAVE_LIBEDIT 1" >>confdefs.h
-
-
-fi
- fi
-
- # some platforms do not list libedit via pkg-config, for example OpenBSD 6.2
-
-if test "x${PBX_LIBEDIT}" != "x1" -a "${USE_LIBEDIT}" != "no"; then
- pbxlibdir=""
- # if --with-LIBEDIT=DIR has been specified, use it.
- if test "x${LIBEDIT_DIR}" != "x"; then
- if test -d ${LIBEDIT_DIR}/lib; then
- pbxlibdir="-L${LIBEDIT_DIR}/lib"
- else
- pbxlibdir="-L${LIBEDIT_DIR}"
- fi
- fi
-
- ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
- CFLAGS="${CFLAGS} "
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for history_init in -ledit" >&5
-$as_echo_n "checking for history_init in -ledit... " >&6; }
-if ${ac_cv_lib_edit_history_init+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ledit ${pbxlibdir} -ltermcap $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char history_init ();
-int
-main ()
-{
-return history_init ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_edit_history_init=yes
-else
- ac_cv_lib_edit_history_init=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_edit_history_init" >&5
-$as_echo "$ac_cv_lib_edit_history_init" >&6; }
-if test "x$ac_cv_lib_edit_history_init" = xyes; then :
- AST_LIBEDIT_FOUND=yes
-else
- AST_LIBEDIT_FOUND=no
-fi
-
- CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
-
-
- # now check for the header.
- if test "${AST_LIBEDIT_FOUND}" = "yes"; then
- LIBEDIT_LIB="${pbxlibdir} -ledit -ltermcap"
- # if --with-LIBEDIT=DIR has been specified, use it.
- if test "x${LIBEDIT_DIR}" != "x"; then
- LIBEDIT_INCLUDE="-I${LIBEDIT_DIR}/include"
- fi
- LIBEDIT_INCLUDE="${LIBEDIT_INCLUDE} "
-
- # check for the header
- ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
- CPPFLAGS="${CPPFLAGS} ${LIBEDIT_INCLUDE}"
- ac_fn_c_check_header_mongrel "$LINENO" "histedit.h" "ac_cv_header_histedit_h" "$ac_includes_default"
-if test "x$ac_cv_header_histedit_h" = xyes; then :
- LIBEDIT_HEADER_FOUND=1
-else
- LIBEDIT_HEADER_FOUND=0
-fi
-
-
- CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
-
- if test "x${LIBEDIT_HEADER_FOUND}" = "x0" ; then
- LIBEDIT_LIB=""
- LIBEDIT_INCLUDE=""
- else
-
- PBX_LIBEDIT=1
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBEDIT 1
-_ACEOF
-
- fi
- fi
-fi
-
-
- if test "$PBX_LIBEDIT" = "1"; then
- LIBEDIT_INTERNAL="no"
- fi
- fi
- if test "${LIBEDIT_INTERNAL}" = "yes"; then
- PBX_LIBEDIT=1
- LIBEDIT_IS_UNICODE=no
- else
-
- if test "x${PBX_LIBEDIT_IS_UNICODE}" != "x1" -a "${USE_LIBEDIT_IS_UNICODE}" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Testing for libedit unicode support" >&5
-$as_echo_n "checking for Testing for libedit unicode support... " >&6; }
- saved_cppflags="${CPPFLAGS}"
- if test "x${LIBEDIT_IS_UNICODE_DIR}" != "x"; then
- LIBEDIT_IS_UNICODE_INCLUDE="-I${LIBEDIT_IS_UNICODE_DIR}/include"
- fi
- CPPFLAGS="${CPPFLAGS} ${LIBEDIT_IS_UNICODE_INCLUDE}"
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
- #include <histedit.h>
-int
-main ()
-{
- el_rfunc_t *callback;;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- PBX_LIBEDIT_IS_UNICODE=1
-
-$as_echo "#define HAVE_LIBEDIT_IS_UNICODE 1" >>confdefs.h
-
-
-
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CPPFLAGS="${saved_cppflags}"
- fi
-
fi
fi
diff --git a/configure.ac b/configure.ac
index 0608938..81057ce 100644
--- a/configure.ac
+++ b/configure.ac
@@ -620,23 +620,57 @@
AC_CHECK_HEADERS([arpa/inet.h libintl.h malloc.h netdb.h stddef.h strings.h sys/event.h utime.h])
-# Any one of these packages support a mandatory requirement, so we want to check on them as early as possible.
-AST_EXT_LIB_CHECK([TERMCAP], [termcap], [tgetent], [])
-AST_EXT_LIB_CHECK([TINFO], [tinfo], [tgetent], [])
-AST_EXT_LIB_CHECK([CURSES], [curses], [initscr], [curses.h])
-AST_EXT_LIB_CHECK([NCURSES], [ncurses], [initscr], [curses.h])
-
+# Find required NetBSD Editline library (libedit).
EDITLINE_LIB=""
-if test "x$TERMCAP_LIB" != "x" ; then
- EDITLINE_LIB="$TERMCAP_LIB"
-elif test "x$TINFO_LIB" != "x" ; then
- EDITLINE_LIB="$TINFO_LIB"
-elif test "x$CURSES_LIB" != "x" ; then
- EDITLINE_LIB="$CURSES_LIB"
-elif test "x$NCURSES_LIB" != "x" ; then
- EDITLINE_LIB="$NCURSES_LIB"
-else
- AC_MSG_ERROR([*** termcap support not found (on modern systems, this typically means the ncurses development package is missing)])
+LIBEDIT_INTERNAL="yes"
+AC_SUBST(LIBEDIT_INTERNAL)
+LIBEDIT_SYSTEM="yes"
+if test "${USE_LIBEDIT}" != "no"; then
+ if test "${LIBEDIT_DIR}" = "internal"; then
+ LIBEDIT_SYSTEM="no"
+ elif test "${LIBEDIT_DIR}" != ""; then
+ LIBEDIT_INTERNAL="no"
+ fi
+ if test "${LIBEDIT_SYSTEM}" = "yes"; then
+ AST_PKG_CONFIG_CHECK(LIBEDIT, libedit)
+ # some platforms do not list libedit via pkg-config, for example OpenBSD 6.2
+ AST_EXT_LIB_CHECK([LIBEDIT], [edit], [history_init], [histedit.h], [-ltermcap])
+ if test "$PBX_LIBEDIT" = "1"; then
+ LIBEDIT_INTERNAL="no"
+ fi
+ fi
+ if test "${LIBEDIT_INTERNAL}" = "yes"; then
+ PBX_LIBEDIT=1
+ LIBEDIT_IS_UNICODE=no
+ else
+ AST_C_COMPILE_CHECK([LIBEDIT_IS_UNICODE], [el_rfunc_t *callback;], [histedit.h], [], [Testing for libedit unicode support])
+ fi
+fi
+# If the Asterisk internal copy should be build (user said so) or
+# must be build (system does not have it), either -ltermcap,
+# -ltinfo, or -l{n}curses must be available.
+if test "${LIBEDIT_INTERNAL}" = "yes"; then
+ AST_EXT_LIB_CHECK([TERMCAP], [termcap], [tgetent], [])
+ if test "x$TERMCAP_LIB" != "x" ; then
+ EDITLINE_LIB="$TERMCAP_LIB"
+ else
+ AST_EXT_LIB_CHECK([TINFO], [tinfo], [tgetent], [])
+ if test "x$TINFO_LIB" != "x" ; then
+ EDITLINE_LIB="$TINFO_LIB"
+ else
+ AST_EXT_LIB_CHECK([CURSES], [curses], [initscr], [curses.h])
+ if test "x$CURSES_LIB" != "x" ; then
+ EDITLINE_LIB="$CURSES_LIB"
+ else
+ AST_EXT_LIB_CHECK([NCURSES], [ncurses], [initscr], [curses.h])
+ if test "x$NCURSES_LIB" != "x" ; then
+ EDITLINE_LIB="$NCURSES_LIB"
+ else
+ AC_MSG_ERROR([*** termcap support not found (on modern systems, this typically means the ncurses development package is missing)])
+ fi
+ fi
+ fi
+ fi
fi
AC_SUBST(EDITLINE_LIB)
@@ -1584,31 +1618,6 @@
fi
if test "${ILBC_INTERNAL}" = "yes"; then
PBX_ILBC=1
- fi
-fi
-
-LIBEDIT_INTERNAL="yes"
-AC_SUBST(LIBEDIT_INTERNAL)
-LIBEDIT_SYSTEM="yes"
-if test "${USE_LIBEDIT}" != "no"; then
- if test "${LIBEDIT_DIR}" = "internal"; then
- LIBEDIT_SYSTEM="no"
- elif test "${LIBEDIT_DIR}" != ""; then
- LIBEDIT_INTERNAL="no"
- fi
- if test "${LIBEDIT_SYSTEM}" = "yes"; then
- AST_PKG_CONFIG_CHECK(LIBEDIT, libedit)
- # some platforms do not list libedit via pkg-config, for example OpenBSD 6.2
- AST_EXT_LIB_CHECK([LIBEDIT], [edit], [history_init], [histedit.h], [-ltermcap])
- if test "$PBX_LIBEDIT" = "1"; then
- LIBEDIT_INTERNAL="no"
- fi
- fi
- if test "${LIBEDIT_INTERNAL}" = "yes"; then
- PBX_LIBEDIT=1
- LIBEDIT_IS_UNICODE=no
- else
- AST_C_COMPILE_CHECK([LIBEDIT_IS_UNICODE], [el_rfunc_t *callback;], [histedit.h], [], [Testing for libedit unicode support])
fi
fi
--
To view, visit https://gerrit.asterisk.org/8630
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-Project: asterisk
Gerrit-Branch: 15
Gerrit-MessageType: merged
Gerrit-Change-Id: Ib17a7415297a210cfcdbf149e4df9b6edadbfab6
Gerrit-Change-Number: 8630
Gerrit-PatchSet: 1
Gerrit-Owner: Alexander Traud <pabstraud at compuserve.com>
Gerrit-Reviewer: Corey Farrell <git at cfware.com>
Gerrit-Reviewer: Jenkins2
Gerrit-Reviewer: Joshua Colp <jcolp at digium.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-code-review/attachments/20180402/8ffa8fb6/attachment-0001.html>
More information about the asterisk-code-review
mailing list