[Asterisk-code-review] pjsip/immediate ok notify: Add test for 'refer blind progres... (testsuite[master])
Jenkins2
asteriskteam at digium.com
Fri Jun 2 16:32:17 CDT 2017
Jenkins2 has submitted this change and it was merged. ( https://gerrit.asterisk.org/5745 )
Change subject: pjsip/immediate_ok_notify: Add test for 'refer_blind_progress' option.
......................................................................
pjsip/immediate_ok_notify: Add test for 'refer_blind_progress' option.
The 'refer_blind_progress' option for PJSIP controls the resulting NOTIFY
messages that occur as a result of a blind transfer. When the option is
enabled NOTIFY messages are sent which provide information on the progress
of the blind transfer. When the option is disabled a NOTIFY is immediately
sent indicating the transfer was a success.
This test ensures that when the option is disabled that we send only two
NOTIFY messages: a 100 Trying followed by a 200 OK.
ASTERISK-26333
Change-Id: I41639d35edcc78cd75dde8bbb0c8967942a8e60a
---
A tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/extensions.conf
A tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/pjsip.conf
A tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/sipp/transferer.xml
A tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/test-config.yaml
M tests/channels/pjsip/transfers/blind_transfer/tests.yaml
5 files changed, 195 insertions(+), 0 deletions(-)
Approvals:
George Joseph: Looks good to me, approved
Jenkins2: Approved for Submit
diff --git a/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/extensions.conf b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/extensions.conf
new file mode 100644
index 0000000..92e6724
--- /dev/null
+++ b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/extensions.conf
@@ -0,0 +1,14 @@
+[default]
+
+exten => echo,1,Answer()
+same => n,Echo()
+same => n,Hangup()
+
+exten => call-sipp,1,Dial(PJSIP/sipp)
+same => n,Hangup()
+
+; This extension normally results in a blind transfer NOTIFY flow of 100 Trying, 180 Ringing, 200 OK.
+exten => test,1,Ringing()
+same => n,Wait(1)
+same => n,Answer()
+same => n,Hangup()
diff --git a/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/pjsip.conf b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/pjsip.conf
new file mode 100644
index 0000000..a40b4f3
--- /dev/null
+++ b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/configs/ast1/pjsip.conf
@@ -0,0 +1,15 @@
+[main-transport]
+type = transport
+protocol = udp
+bind = 127.0.0.1
+
+[sipp]
+type = endpoint
+context = default
+allow = ulaw
+aors = sipp
+refer_blind_progress = no
+
+[sipp]
+type = aor
+contact = sip:sipp at 127.0.0.1:5061
diff --git a/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/sipp/transferer.xml b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/sipp/transferer.xml
new file mode 100644
index 0000000..31ec70c
--- /dev/null
+++ b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/sipp/transferer.xml
@@ -0,0 +1,109 @@
+<?xml version="1.0" encoding="ISO-8859-1" ?>
+<!DOCTYPE scenario SYSTEM "sipp.dtd">
+<scenario name="transferer">
+ <Global variables="remote_tag" />
+ <recv request="INVITE" crlf="true">
+ <!-- Save the from tag. We'll need it when we send our REFER -->
+ <action>
+ <ereg regexp="(;tag=.*)"
+ header="From:"
+ search_in="hdr"
+ check_it="true"
+ assign_to="remote_tag"/>
+ </action>
+ </recv>
+
+ <send>
+ <![CDATA[
+
+ SIP/2.0 180 Ringing
+ [last_Via:]
+ [last_From:]
+ [last_To:];tag=[pid]SIPpTag01[call_number]
+ [last_Call-ID:]
+ [last_CSeq:]
+ Contact: <sip:[local_ip]:[local_port];transport=[transport]>
+ Content-Length: 0
+
+ ]]>
+ </send>
+
+ <send retrans="500">
+ <![CDATA[
+
+ SIP/2.0 200 OK
+ [last_Via:]
+ [last_From:]
+ [last_To:];tag=[pid]SIPpTag00[call_number]
+ [last_Call-ID:]
+ [last_CSeq:]
+ Contact: <sip:[local_ip]:[local_port];transport=[transport]>
+ Content-Type: application/sdp
+ Content-Length: [len]
+
+ v=0
+ o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip]
+ s=-
+ c=IN IP[media_ip_type] [media_ip]
+ t=0 0
+ m=audio [media_port] RTP/AVP 0
+ a=rtpmap:0 PCMU/8000
+
+ ]]>
+ </send>
+
+ <recv request="ACK"
+ rtd="true"
+ crlf="true">
+ </recv>
+
+ <pause milliseconds="2000" />
+
+ <send retrans="500">
+ <![CDATA[
+
+ REFER sip:sipp@[remote_ip]:[remote_port] SIP/2.0
+ Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
+ From: sipp <sip:sipp@[local_ip]:[local_port]>;tag=[pid]SIPpTag00[call_number]
+ To: sut <sip:[service]@[remote_ip]:[remote_port]>[$remote_tag]
+ Call-ID: [call_id]
+ CSeq: [cseq] REFER
+ Contact: sip:sipp@[local_ip]:[local_port]
+ Max-Forwards: 70
+ Subject: Performance Test
+ Refer-To: sip:test@[remote_ip]:[remote_port];user=phone
+ Referred-By: sip:sipp@[local_ip]:[local_port]
+ Content-Length: 0
+
+ ]]>
+
+ </send>
+
+ <recv response="202" rtd="true">
+ </recv>
+
+ <!-- The first NOTIFY we receive should be a 100 Trying -->
+ <recv request="NOTIFY" crlf="true">
+ <action>
+ <ereg regexp="(SIP/2.0 100 Trying)"
+ search_in="msg"
+ check_it="true"
+ assign_to="dummy,sip_frag"/>
+ </action>
+ </recv>
+
+ <!-- Followed by a 200 OK since the option is set to no -->
+ <recv request="NOTIFY" crlf="true">
+ <action>
+ <ereg regexp="(SIP/2.0 200 OK)"
+ search_in="msg"
+ check_it="true"
+ assign_to="dummy,sip_frag"/>
+ </action>
+ </rcv>
+
+ <Reference variables="sip_frag" />
+ <Reference variables="dummy" />
+
+</scenario>
+
diff --git a/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/test-config.yaml b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/test-config.yaml
new file mode 100644
index 0000000..297cf60
--- /dev/null
+++ b/tests/channels/pjsip/transfers/blind_transfer/immediate_ok_notify/test-config.yaml
@@ -0,0 +1,56 @@
+testinfo:
+ summary: "Ensure that when the refer_blind_progress option is set to no we get an immediate 200 OK NOTIFY"
+ description: |
+ 'Asterisk originates a call to a Local channel that runs Echo. The other half of
+ the local channel is placed into the dialplan and calls a SIPp scenario. The SIPp
+ scenario answers the call and then performs a blind transfer. The target of the blind
+ transfer performs ringing for a period of time and then answers. The endpoint
+ that the SIPp scenario uses is configured with the refer_blind_progress option set to no.
+ The SIPp scenario tests that it receives only two NOTIF messages: a 100 Trying and a
+ 200 OK.
+
+test-modules:
+ test-object:
+ config-section: sipp-config
+ typename: sipp.SIPpTestCase
+ modules:
+ -
+ config-section: originator-config
+ typename: pluggable_modules.Originator
+ -
+ config-section: 'hangup-monitor'
+ typename: 'pluggable_modules.HangupMonitor'
+
+sipp-config:
+ stop-after-scenarios: false
+ test-iterations:
+ -
+ scenarios:
+ - { 'key-args': {'scenario': 'transferer.xml', '-i': '127.0.0.1', '-p': '5061' }}
+
+originator-config:
+ channel: 'Local/echo at default'
+ context: 'default'
+ exten: 'call-sipp'
+ priority: '1'
+ trigger: 'scenario_start'
+ scenario-name: 'transferer.xml'
+
+hangup-monitor:
+ ids: '0'
+
+properties:
+ minversion: '13.17.0'
+ dependencies:
+ - sipp:
+ version: 'v3.0'
+ - asterisk: 'res_pjsip'
+ - asterisk: 'res_pjsip_session'
+ - asterisk: 'res_pjsip_refer'
+ - asterisk: 'chan_pjsip'
+ - asterisk: 'app_dial'
+ tags:
+ - pjsip
+ testconditions:
+ -
+ name: 'channels'
diff --git a/tests/channels/pjsip/transfers/blind_transfer/tests.yaml b/tests/channels/pjsip/transfers/blind_transfer/tests.yaml
index 6688906..c7cbd32 100644
--- a/tests/channels/pjsip/transfers/blind_transfer/tests.yaml
+++ b/tests/channels/pjsip/transfers/blind_transfer/tests.yaml
@@ -10,3 +10,4 @@
- test: 'caller_with_hold_drop_options'
- test: 'goto_on_blindxfr'
- test: 'no_target_in_refer'
+ - test: 'immediate_ok_notify'
--
To view, visit https://gerrit.asterisk.org/5745
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: I41639d35edcc78cd75dde8bbb0c8967942a8e60a
Gerrit-PatchSet: 1
Gerrit-Project: testsuite
Gerrit-Branch: master
Gerrit-Owner: Joshua Colp <jcolp at digium.com>
Gerrit-Reviewer: George Joseph <gjoseph at digium.com>
Gerrit-Reviewer: Jenkins2
More information about the asterisk-code-review
mailing list