[Asterisk-code-review] build: Execute ldconfig to build cache. (take two) (asterisk[master])
George Joseph
asteriskteam at digium.com
Thu Feb 23 16:07:29 CST 2017
George Joseph has uploaded a new change for review. ( https://gerrit.asterisk.org/5082 )
Change subject: build: Execute ldconfig to build cache. (take two)
......................................................................
build: Execute ldconfig to build cache. (take two)
On some platforms a multiarch approach is used for libraries.
The build system does not take this into account and still
places libraries into the lib directory if no --libdir is
specified to configure. On initial startup this results in
libasteriskssl.so not being found, as it is not in the multiarch
lib directory. To make matters worse, options were being passed
to ldconfig on both Linux and FreeBSD that actually prevented
the rebuild of the cache.
* Fedora has a /usr/share/config.site that automatically tells
autoconf to use /usr/lib64 but CentOS does not. This logic was
copied to configure.ac and modified so systems like Ubuntu,
which still use /usr/lib for 64-bit systems, aren't affected.
Now that we have them in the correct directory...
In order for the system loader to find libasteriskssl and
libasteriskpj, one of 3 things has to happen...
- The linker cache must be rebuilt including the directory
where the libasterisk* libraries were installed. Only root
can rebuild the cache. This was busted.
- We have to link the asterisk binary with an rpath pointing
to the directrory where the libasterisk* libraries were
installed. This makes things very complicated and will happen
over the collective dead bodies of everyone who's had to
package a distribution with an rpath.
- Finally, you can start asterisk with LD_LIBRARY_PATH set to the
directrory where the libasterisk* libraries were installed.
There are no other options. So...
* The invokation of ldconfig has been moved from main/Makefile
to ASTTOPDIR/Makefile, the options have been removed, and
DESTDIR/ASTLIBDIR appended. If you aren't root, you will be
warned after the "Asterisk Installation Compete" banner that
you must re-run 'make install' as root, manually run
'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with
LD_LIBRARY_PATH.
ASTERISK-26705
Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982
---
M Makefile
M configure
M configure.ac
M main/Makefile
4 files changed, 65 insertions(+), 13 deletions(-)
git pull ssh://gerrit.asterisk.org:29418/asterisk refs/changes/82/5082/1
diff --git a/Makefile b/Makefile
index 8e237e1..80845d5 100644
--- a/Makefile
+++ b/Makefile
@@ -182,11 +182,6 @@
# Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
OPTIONS=
-ifeq ($(OSARCH),linux-gnu)
- # flag to tell 'ldconfig' to only process specified directories
- LDCONFIG_FLAGS=-n
-endif
-
ifeq ($(findstring -save-temps,$(_ASTCFLAGS) $(ASTCFLAGS)),)
ifeq ($(findstring -pipe,$(_ASTCFLAGS) $(ASTCFLAGS)),)
_ASTCFLAGS+=-pipe
@@ -222,8 +217,6 @@
# -V is understood by BSD Make, not by GNU make.
BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
_ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
- # flag to tell 'ldconfig' to only process specified directories
- LDCONFIG_FLAGS=-m
endif
ifeq ($(OSARCH),NetBSD)
@@ -642,6 +635,23 @@
echo " WARNING WARNING WARNING" ;\
fi
+ld-cache-update:
+ifneq ($(LDCONFIG),)
+ @if [ $${EUID} -eq 0 ] ; then \
+ $(LDCONFIG) "$(DESTDIR)$(ASTLIBDIR)/" ; \
+ else \
+ echo " WARNING WARNING WARNING" ;\
+ echo "" ;\
+ echo " You cannot rebuild the system linker cache unless you are root. " ;\
+ echo " You MUST do one of the follwing..." ;\
+ echo " * Re-run 'make install' as root. " ;\
+ echo " * Run 'ldconfig $(DESTDIR)$(ASTLIBDIR)' as root. " ;\
+ echo " * Run asterisk with 'LD_LIBRARY_PATH=$(DESTDIR)$(ASTLIBDIR) asterisk' " ;\
+ echo "" ;\
+ echo " WARNING WARNING WARNING" ;\
+ fi
+endif
+
badshell:
ifneq ($(filter ~%,$(DESTDIR)),)
@echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
@@ -680,6 +690,7 @@
@echo " + doxygen installed on your local system +"
@echo " +-------------------------------------------+"
@$(MAKE) -s oldmodcheck
+ @$(MAKE) -s ld-cache-update
isntall: install
@@ -912,6 +923,9 @@
rm -f $(DESTDIR)$(DAHDI_UDEV_HOOK_DIR)/40-asterisk
endif
$(MAKE) -C sounds uninstall
+ifneq ($(LDCONFIG),)
+ $(LDCONFIG) || :
+endif
uninstall: _uninstall
@echo " +--------- Asterisk Uninstall Complete -----+"
@@ -1042,6 +1056,7 @@
.PHONY: ari-stubs
.PHONY: basic-pbx
.PHONY: check-alembic
+.PHONY: ld-cache-update
.PHONY: $(SUBDIRS_INSTALL)
.PHONY: $(SUBDIRS_DIST_CLEAN)
.PHONY: $(SUBDIRS_CLEAN)
diff --git a/configure b/configure
index 42a21d7..0c2d84e 100755
--- a/configure
+++ b/configure
@@ -4892,6 +4892,28 @@
fi
fi
+#
+# The following code for detecting lib64 was taken from Fedora's
+# /usr/share/config.site with a modification to check that the
+# /usr/lib64 directory actually exists. This prevents libdir from
+# being set to /usr/lib64 on 64-bit systems that still use /usr/lib.
+#
+if test "$prefix" = /usr ||\
+ { test "$prefix" = NONE && test "$ac_default_prefix" = /usr ; }
+then
+ for i in x86_64 ppc64 s390x aarch64; do
+ if test $host_cpu = $i; then
+ if test "$libdir" = '${exec_prefix}/lib' &&\
+ { test -d "${exec_prefix}/lib64" || test -d "${ac_default_prefix}/lib64" ; } ; then
+ libdir='${exec_prefix}/lib64'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Setting libdir=${libdir} " >&5
+$as_echo "$as_me: Setting libdir=${libdir} " >&6;}
+ fi
+ break
+ fi
+ done
+fi
+
BUILD_PLATFORM=${build}
BUILD_CPU=${build_cpu}
BUILD_VENDOR=${build_vendor}
diff --git a/configure.ac b/configure.ac
index fff8ecf..beb151a 100644
--- a/configure.ac
+++ b/configure.ac
@@ -135,6 +135,27 @@
fi
fi
+#
+# The following code for detecting lib64 was taken from Fedora's
+# /usr/share/config.site with a modification to check that the
+# /usr/lib64 directory actually exists. This prevents libdir from
+# being set to /usr/lib64 on 64-bit systems that still use /usr/lib.
+#
+if test "$prefix" = /usr ||\
+ { test "$prefix" = NONE && test "$ac_default_prefix" = /usr ; }
+then
+ for i in x86_64 ppc64 s390x aarch64; do
+ if test $host_cpu = $i; then
+ if test "$libdir" = '${exec_prefix}/lib' &&\
+ { test -d "${exec_prefix}/lib64" || test -d "${ac_default_prefix}/lib64" ; } ; then
+ libdir='${exec_prefix}/lib64'
+ AC_MSG_NOTICE([ Setting libdir=${libdir} ])
+ fi
+ break
+ fi
+ done
+fi
+
BUILD_PLATFORM=${build}
BUILD_CPU=${build_cpu}
BUILD_VENDOR=${build_vendor}
diff --git a/main/Makefile b/main/Makefile
index 4d1b2c4..d3463f7 100644
--- a/main/Makefile
+++ b/main/Makefile
@@ -354,9 +354,6 @@
$(INSTALL) -m 755 $(ASTPJ_LIB) "$(DESTDIR)$(ASTLIBDIR)/"
endif
endif
-ifneq ($(LDCONFIG),)
- $(LDCONFIG) $(LDCONFIG_FLAGS) "$(DESTDIR)$(ASTLIBDIR)/"
-endif
$(LN) -sf asterisk "$(DESTDIR)$(ASTSBINDIR)/rasterisk"
binuninstall:
@@ -371,9 +368,6 @@
# ASTSSL_SO_VERSION may not exist on Darwin
rm -f "$(DESTDIR)$(ASTLIBDIR)/$(ASTPJ_LIB).$(ASTPJ_SO_VERSION)" || :
rm -f "$(DESTDIR)$(ASTLIBDIR)/$(ASTPJ_LIB)"
-endif
-ifneq ($(LDCONFIG),)
- $(LDCONFIG) $(LDCONFIG_FLAGS) "$(DESTDIR)$(ASTLIBDIR)/"
endif
clean::
--
To view, visit https://gerrit.asterisk.org/5082
To unsubscribe, visit https://gerrit.asterisk.org/settings
Gerrit-MessageType: newchange
Gerrit-Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982
Gerrit-PatchSet: 1
Gerrit-Project: asterisk
Gerrit-Branch: master
Gerrit-Owner: George Joseph <gjoseph at digium.com>
More information about the asterisk-code-review
mailing list