[Asterisk-bsd] Digium b410p with i4b

[Mikael Batard]

On 31.05.2007 19:09, Pim van Stam wrote:

> This card is most probably not added in i4b, at least not revision 467.
> You are far behind, btw. It's revision 510 at this moment. Please use
> 'svn update' in i4b directory.
> This card is not in the source yet. Maybe Hans Petter will be so kind to
> add it. In the meantime you can add it in
> i4b/trunk/i4b/src/sys/i4b/layer1/ihfc2/i4b_hfc4s8s.h
> Search for "I4B_PCI_DRIVER(/* HFC-4S */"

Thanks for your help, i've updated with last svn and added the card in 
that file and : it works !

$ pciconf -vl
ihfc0 at pci6:1:0: class=0x020400 card=0xb410d161 chip=0xb410d161 rev=0x01 
hdr=0x00
     class    = network
     subclass = ISDN

$ isdnconfig
controller 8 = {
   Layer 1:
     description : HFC-4S PCI ISDN adapter
     type        : passive ISDN (Basic Rate, 2xB)
     channels    : 0x3
     serial      : 0xabd5
     power_save  : on
     dialtone    : enabled
     attached    : yes
     PH-state    : F0: Reset
   Layer 2:
     driver_type : DRVR_D_CHANNEL
}
... (+ controller 9, 10 & 11)

> I am very curious in you're findings with this card, especially the echo
> cancellation part, which is on-board as it seems.

Yes, the card can do hardware echo cancellation.
I'll post my findings after some tests :)

Regards,
-- 
Mikael Batard
Wan Again
12 Route de l'Isle
84510 Caumont sur Durance
Tel: +33 (0)4 90 01 26 86
Fax: +33 (0)4 90 23 10 58
http://www.wanagain.fr/