[Asterisk-bsd] AskoziaPBX

[Michael Iedema]

>  Trying to assign network port (option 1) fail on sis0 (no link-up detected)
> using auto-detect
>  Or Invalid interface name using sis0

You should not be using sisX with that board. Support for the via card
mentioned in one of your other replies is built into the generic-pc
image but perhaps something is wrong. After selecting option 1, what
appears under "valid interfaces are:"?

>  Trying to assign lan Ip (option 2) let me type 192.168.2.123 as Ip adress
> (my network is 192.168.2.0/24) but refuse the network mask 255.255.255.0

Are you entering this as "24"? It is expecting the netmask to be given
in CIDR form.

(Perhaps after this thread is done, we can move the discussion to the
AskoziaPBX list?)

Thanks for testing, hopefully this helps,
--Michael I.