[Asterisk-bsd] chan_capi / liblinuxcapi build error on FreeBSD 6.1-RELEASE

[Gabriel Georgescu]

As an ideea: in my port's tree updated yesterday I cannot find 
/usr/ports/comms/liblinuxcapi.
So I think this port is no longer available or maintained.



At 12:37 AM 9/21/2006, Aragon Gouveia wrote:
>Hi,
>
>I've tried mailing Jan Stocker about this, but so far no response.  I've
>tried posting on the freebsd-isdn list but later realised that it might not
>be the best place to look for help with this.  I was hoping someone else
>might have had this problem and could help me fix it.
>
>I have Jan's chan_capi and liblinuxcapi ports installed in my ports tree on
>a FreeBSD 6.1-RELEASE machine.  liblinuxcapi will not build.  Here is the
>transcript:
>
>---
># pwd
>/usr/ports/comms/liblinuxcapi
># make
>===>  Vulnerability check disabled, database not found
>===>  Extracting for liblinuxcapi-cvs-20050201
>=> MD5 Checksum OK for isdn4k-utils-CVS-2005-02-01.tar.bz2.
>=> No SHA256 checksum recorded for isdn4k-utils-CVS-2005-02-01.tar.bz2.
>===>  Patching for liblinuxcapi-cvs-20050201
>===>  Applying FreeBSD patches for liblinuxcapi-cvs-20050201
>===>   liblinuxcapi-cvs-20050201 depends on executable in : gmake - found
>===>  Configuring for liblinuxcapi-cvs-20050201
>configure: WARNING: you should use --build, --host, --target
>configure: error: cannot find sources (capi20.c) in . or ..
>===>  Script "configure" failed unexpectedly.
>Please report the problem to Jan.Stocker at t-online.de [maintainer] and 
>attach the
>"/usr/ports/comms/liblinuxcapi/work/isdn4k-utils-CVS-2005-02-01/capi20/config.log"
>including the output of the failure of your make command. Also, it might be
>a good idea to provide an overview of all packages installed on your system
>(e.g. an ls /var/db/pkg).
>*** Error code 1
>
>Stop in /usr/ports/comms/liblinuxcapi.
>---
>
>I think the problem is automake/autoconf related.  I've tried going into the
>capi20 directory, deleting the configure script and recreating it by running
>autoconf259.  The build then progresses further, but then configure can't
>find automake, autoheader, aclocal, and autoconf.  I have autoconf 2.59 and
>automake 1.9 installed on this machine and have tried creating symlinks to
>the versioned binaries in /usr/local/bin.  Configure then finds the above,
>but is now complaining about libtool:
>
>---
>config.status: creating Makefile
>===>  Building for liblinuxcapi-cvs-20050201
>cd . && aclocal
>aclocal:configure.in:10: warning: macro M_PROG_LIBTOOL' not found in
>library
>cd . && automake --foreign Makefile
>Makefile.am:8: Libtool library used but IBTOOL' is undefined
>Makefile.am:8:
>Makefile.am:8: The usual way to define IBTOOL' is to add C_PROG_LIBTOOL'
>Makefile.am:8: to onfigure.in' and run clocal' and utoconf' again.
>Makefile.am: required file ./compile' not found
>gmake: *** [Makefile.in] Error 1
>*** Error code 2
>---
>
>I'm in a bit over my head here, hence the random hacks at a fix.  Can anyone
>help me with this please?  Looks like a library dependancy issue to me...
>
>
>Thanks,
>Aragon
>_______________________________________________
>Asterisk-BSD mailing list
>Asterisk-BSD at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-bsd