[Asterisk-bsd] Problem with more than one PRI on TE410P

Wed Aug 10 13:14:30 CDT 2005

I recently tried adding more PRI lines to my PSTN gateway server running
FreeBSD 5.3-RELEASE-p10 with a TE410P digium card. The one PRI has been on
it for a few months and seems to work fine, but it would not take the other
2 but got some odd errors. Any ideas? These 2 PRI came from another active
production server (a Linux server) that works fine so I know the lines
themselves aren't the problem.

Span 2 was showing a red alarm which I could seem to get rid of. Even with
it unplugged and turned off the red alarm stayed (and it now also on span3
with just the span1 in and enabled). Even when just span2 had the red alarm,
I couldn't get span3 or 4 to work either (same errors).

=== Asterisk Error Log ===

Aug  9 01:08:51 WARNING[776]: No D-channels available!  Using Primary on
channel anyway 24!

Aug  9 01:08:57 WARNING[776]: PRI: !! Unexpected Channel selection 0

Aug  9 01:09:32 ERROR[799]: Unable to open D-channel 72 (Device busy)

Aug  9 01:09:32 ERROR[799]: Unable to start D-channel on span 3

Aug  9 01:09:32 WARNING[799]: chan_zap.so: load_module failed, returning -1

Aug  9 01:09:32 WARNING[799]: Loading module chan_zap.so failed!

Aug  9 01:10:02 WARNING[817]: PRI: !! Unexpected Channel selection 0

Aug  9 01:14:11 ERROR[450]: Unable to open D-channel 48 (Device busy)

Aug  9 01:14:11 ERROR[450]: Unable to start D-channel on span 2

Aug  9 01:14:11 WARNING[450]: chan_zap.so: load_module failed, returning -1

Aug  9 01:14:11 WARNING[450]: Loading module chan_zap.so failed!

Aug  9 01:17:02 ERROR[536]: Unable to open D-channel 72 (Device busy)

Aug  9 01:17:02 ERROR[536]: Unable to start D-channel on span 3

Aug  9 01:17:02 WARNING[536]: chan_zap.so: load_module failed, returning -1

Aug  9 01:17:02 WARNING[536]: Loading module chan_zap.so failed!

Aug  9 01:19:35 ERROR[448]: Unable to open D-channel 72 (Device busy)

Aug  9 01:19:35 ERROR[448]: Unable to start D-channel on span 3

Aug  9 01:19:35 WARNING[448]: chan_zap.so: load_module failed, returning -1

Aug  9 01:19:35 WARNING[448]: Loading module chan_zap.so failed!

Aug  9 01:21:58 WARNING[528]: PRI: !! Unexpected Channel selection 0

=== /usr/local/etc/zaptel.conf ===

# Several variations in here were tried as I tried different combinations 

# (like span 1 and 3) but here is what it looked like with spans 1-3
enabled.

# This is a ZAP interface file

span=1,0,0,esf,b8zs

span=2,0,0,esf,b8zs

span=3,0,0,esf,b8zs

bchan=1-23,25-47,49-71

dchan=24,48,72

loadzone=us

defaultzone=us

=== /usr/local/etc/asterisk/zapata.conf ===

; All that changed here was more of the channel lines

[channels]

busydetect=1

busycount=7

relaxdtmf=yes

;callreturn=yes

callwaiting=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

cancallforward=yes

usecallerid=yes

echocancel=yes

echocancelwhenbridged=yes

;echotraining=yes ;800

rxgain=0.0

txgain=0.0

immediate=no

callerid=asreceived

context=pstn-in

signalling=pri_cpe

group=1

channel => 1-23

channel => 25-47

channel => 49-71

=== Software Versions ===

zaptel-0.10

libpri-1.0.9

asterisk-1.0.9_1

=== Part of /var/log/messages ===

Aug  9 01:19:34 gateway2 kernel: Zapata Telephony Interface Registered on
major 196

Aug  9 01:19:34 gateway2 kernel: wct4xxp0: <Wildcard TE405/410P Xilinx> mem
0xfebfec00-0xfebfec7f irq 20 at device 5.0 on pci0

Aug  9 01:19:34 gateway2 kernel: wct4xxp0: [GIANT-LOCKED]

Aug  9 01:19:34 gateway2 kernel: TE410P version c01a009b

Aug  9 01:19:34 gateway2 kernel: FALC version: 00000005, Board ID: 00

Aug  9 01:19:34 gateway2 kernel: TE410P: Launching card: 0

Aug  9 01:19:34 gateway2 kernel: TE410P: Setting up global serial parameters
for unit 0

Aug  9 01:19:34 gateway2 kernel: Registered tone zone 0 (United States /
North America)

Aug  9 01:19:34 gateway2 kernel: TE410P: Span 1 configured for ESF/B8ZS

Aug  9 01:19:34 gateway2 kernel: TE410P: Span 2 configured for ESF/B8ZS

Aug  9 01:19:34 gateway2 kernel: TE410P: Span 3 configured for ESF/B8ZS

Aug  9 01:19:34 gateway2 kernel: wct4xxp: Setting yellow alarm on span 1

Aug  9 01:19:34 gateway2 kernel: wct4xxp: Setting yellow alarm on span 2

Aug  9 01:19:34 gateway2 kernel: wct4xxp: Setting yellow alarm on span 3

Aug  9 01:19:39 gateway2 kernel: wct4xxp: Clearing yellow alarm on span 1

Aug  9 01:19:39 gateway2 kernel: wct4xxp: Clearing yellow alarm on span 3

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20050810/332281ac/attachment.htm