[Asterisk-bsd] Few questions about Asterisk
Billow Li
billow.li at cgc.com.hk
Wed Aug 3 04:04:49 CDT 2005
Hi,
I think you can login the console and run "help", then you can get more information about Asterisk.
Thanks,
Billow
----- Original Message -----
From: "Chris Stenton" <jacs at gnome.co.uk>
To: "Ganbold Tsagaankhuu" <ganbold at gmail.com>; "Asterisk on BSD discussion" <asterisk-bsd at lists.digium.com>
Sent: Wednesday, August 03, 2005 3:24 PM
Subject: Re: [Asterisk-bsd] Few questions about Asterisk
>
> ----- Original Message -----
> From: "Ganbold Tsagaankhuu" <ganbold at gmail.com>
> To: <asterisk-bsd at lists.digium.com>
> Sent: Wednesday, August 03, 2005 1:29 AM
> Subject: [Asterisk-bsd] Few questions about Asterisk
>
>
> > Hello,
> >
> > I have few questions about Asterisk.
> > I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago.
> >
> > 1.I couldn't find Asterisk version using "asterisk -V" command.
> >
> > How can I to find version information?
>
> use show version from the console
>
> >
> > 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on
> > it.
> >
> > I tried Asterisk CallerID feature, but unable to get it.
> > I tried callerid signaling V23, Bell202, DTMF, no success. Finally, I
> > found in our country (Mongolia) PSTN/Cellular provider send FSK/ETSI
> > type of CallerID.
>
> This question is better asked on asterisk users. In the UK we use FSK ETSI
> PRI signaling which is v23.
>
> You need to find out which encoding method is used in your country ie where
> the data is kept. In australia its on the third ring so you can't answer the
> call for the first 3 rings etc.
>
> Its not asterisk its what your FXO card supports. There was some patches for
> the wildcard 101 for v23 software support but I am not sure if they were
> kept in the source tree if you find thats what you need.
>
>
> >
> > Is Asterisk support such type of CallerID signaling?
> >
> > If no, is there any way to get it?
> >
>
> I don't think you should answer the call before you dial out over zaptel.
>
> use asterisk -vvvvvvr to see whats going on.
>
> > 3.I enjoyed Asterisk most of feature until now. I registered X-Pro
> > softphone, SIP analog and analog phone connected to FXS port too.
> >
> > There one problem is I am unable to make outgoing call from SIP phone,
> > softphone, analog phone through FXO port.
> >
> > Following is my Asterisk configuration:
> > ------------------------------------------
> > zaptel.conf
> > loadzone=us
> > defaultzone=us
> > fxsks=1
> > fxoks=2
> >
> >
> > zapata.conf
> > context=bell
> > signaling=fxs_ks
> > group=1
> > channel => 1
> >
> >
> > context=home
> > group=2
> > signalling=fxo_ks
> > channel => 2
> >
> >
> > sip.conf
> > [88888888]
> > type=friend
> > username=88888888
> > ;secret=1111
> > host=dynamic
> > nat=yes
> > defaultip=192.168.1.5
> > context=bell
> > reinvite=no
> > canreinvite=no
> > callerid=88888888
> > mailbox=88888888 at local
> > allow=g729
> > allow=g723
> > allow=all
> >
> >
> > [99999999]
> > type=friend
> > username=99999999
> > ;secret=1111
> > host=dynamic
> > nat=yes
> > defaultip=192.168.1.1
> > context=bell
> > reinvite=no
> > canreinvite=no
> > callerid=99999999
> > mailbox=99999999 at local
> > allow=g729
> > allow=g723
> >
> >
> > extensions.conf
> > [bell]
> > exten => s,1,Wait
> > exten => s,2,Answer
> > exten => s,3,Playback(greetings)
> > exten => s,4,WaitExten
> >
> >
> > ; used to record prompts
> > exten => 205,1,Wait(2)
> > exten => 205,2,Record(/tmp/greetings:alaw)
> > exten => 205,3,Wait(2)
> > exten => 205,4,Playback(/tmp/greetings)
> > exten => 205,5,Wait(2)
> > exten => 205,6,Hangup
> >
> >
> > exten => 111,1,Dial(CONSOLE/dsp)
> > exten => 111,2,Hangup
> >
> >
> > exten => 100,1,Answer
> > exten => 100,2,MusicOnHold()
> > exten => 100,4,Hangup
> >
> >
> > exten => 200,1,VoicemailMain
> >
> >
> > exten => 300,1,Dial(Zap/2)
> >
> >
> > exten => 400,1,Voicemail(99999)
> >
> >
> > exten => 800,1,MeetMe(100|Mp)
> > exten => 800,2,Hangup
> >
> >
> > exten => 601,1,WaitMusicOnHold(30)
> >
> >
> > exten => 700,1,Dial(SIP/88888888,20,rt)
> > exten => 900,1,Dial(SIP/99999999,20,rt)
> >
> >
> > exten => _ZXXX,1,Answer
> > exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _ZXXXX,1,Answer
> > exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXX,1,Answer
> > exten => _NXXXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXXXX,1,Answer
> > exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
> >
> >
> > [home]
> > exten => s,1,Playback(greetings)
> > exten => 100,1,Answer
> > exten => 100,2,MusicOnHold()
> > exten => 100,4,Hangup
> >
> >
> > exten => 111,1,Dial(CONSOLE/dsp)
> > exten => 111,4,Hangup
> >
> >
> > exten => 700,1,Dial(SIP/88888888,20,rt)
> > exten => 900,1,Dial(SIP/99999999,20,rt)
> >
> >
> > exten => _ZXXX,1,Answer
> > exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _ZXXXX,1,Answer
> > exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXX,1,Answer
> > ;exten => _NXXXXX,2,SetVar(TIMEOUT(AbsoluteTimeout)=10)
> > exten => _NXXXXX,3,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXXXX,1,Answer
> > exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
> >
> >
> > I can to see following in /var/log/messages when I make outgoing call.
> >
> >
> > Jul 20 00:50:26 boldsoft kernel: Zapata Telephony Interface Registered
> > on major 196
> > Jul 20 00:50:26 boldsoft kernel: ZapTel device: vendor=e159 device=1
> > subvendor=8085
> > Jul 20 00:50:26 boldsoft kernel: wcfxo0: <Wildcard X101P> port
> > 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at device 9.0 on
> > pci2
> > Jul 20 00:50:26 boldsoft kernel: ZapTel Attach for wcfxo0: deviceID :
> > 0xe159
> > Jul 20 00:50:26 boldsoft kernel: wcfxo: DAA mode is 'FCC'
> > Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
> > Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
> > Jul 20 00:50:33 boldsoft kernel: FXS device: vendor=e159 device=1
> > subvendor=b100
> > Jul 20 00:50:33 boldsoft kernel: wcfxs0: <Wildcard TDM400P REV E/F>
> > port 0xec00-0xecff mem 0xfafff000-0xfaffffff irq 17 at dev
> > ice 8.0 on pci2
> > Jul 20 00:50:33 boldsoft kernel: FXS Attach for wcfxs0: deviceID :
> > 0xe159
> > Jul 20 00:50:33 boldsoft kernel: Freshmaker version: 63
> > Jul 20 00:50:33 boldsoft kernel: Freshmaker passed register test
> > Jul 20 00:50:35 boldsoft kernel: Module 0: Installed -- AUTO FXS
> > Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> > Jul 20 00:50:35 boldsoft kernel: Module 1: Not installed
> > Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> > Jul 20 00:50:35 boldsoft kernel: Module 2: Not installed
> > Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> > Jul 20 00:50:35 boldsoft kernel: Module 3: Not installed
> > Jul 20 00:50:35 boldsoft kernel: Found a Wildcard TDM: Wildcard
> > TDM400P
> > REV E/F (4 modules)
> > Jul 20 00:50:39 boldsoft kernel: Registered tone zone 0 (United States
> > / North America)
> > Jul 21 02:36:28 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:39:43 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:45:35 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:45:56 boldsoft kernel: DIAL: T99114909w
> > Jul 21 02:47:09 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:47:56 boldsoft kernel: DIAL: T345595w
> > Jul 21 02:48:16 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:48:57 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:49:20 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:49:43 boldsoft kernel: DIAL: T322473w
> > Jul 21 02:50:02 boldsoft kernel: DIAL: T99114909w
> > Jul 21 02:50:27 boldsoft kernel: DIAL: T99190040w
> > Jul 21 02:50:48 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:51:11 boldsoft kernel: DIAL: T91911187w
> > Jul 21 02:54:01 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:54:33 boldsoft kernel: DIAL: T345598w
> > Jul 21 03:04:35 boldsoft kernel: DIAL: T345598w
> > Jul 21 03:06:00 boldsoft kernel: DIAL: T99190040w
> > Jul 21 03:06:24 boldsoft kernel: DIAL: T11345598w
> > Jul 21 03:12:11 boldsoft kernel: DIAL: T1109w
> > Jul 21 03:13:59 boldsoft kernel: DIAL: T18340w
> > Jul 21 03:14:18 boldsoft kernel: DIAL: T18000w
> > Jul 21 03:14:31 boldsoft kernel: DIAL: T18300w
> > Jul 21 03:14:46 boldsoft kernel: DIAL: T345598w
> > Jul 21 03:15:16 boldsoft kernel: DIAL: T99190040w
> > Jul 21 03:15:46 boldsoft kernel: DIAL: T686000w
> > Jul 21 03:16:09 boldsoft kernel: DIAL: T341341w
> > Jul 21 03:16:39 boldsoft kernel: DIAL: T99114909w
> > Jul 21 03:17:02 boldsoft kernel: DIAL: T345598w
> > Jul 21 09:47:15 boldsoft kernel: DIAL: T345598w
> >
> > In Mongolia PSTN local number has 5-6 digits, Mobile number has 8
> > digits and special enquiry service with 3-4 digits.
> >
> > I can to hear BUSY TONE after several seconds.
> >
> > 4.There another problem with Wildcard TDM400P REV E/F FXS port.
> >
> > After ~30mins I can't to hear DIALTONE on analog phone connected to
> > FXS port.
> >
> > and I got following in /var/log/messages
> > Jul 21 01:35:39 boldsoft kernel: Power alarm on module 1, resetting!
> > Jul 21 09:57:06 boldsoft kernel: Freed a Wildcard
> > Jul 21 09:57:06 boldsoft kernel: ZapTel detach!
> > Jul 21 09:57:06 boldsoft kernel: wcfxo0: detached
> > Jul 21 09:57:13 boldsoft kernel: FXS device: vendor=e159 device=1
> > subvendor=8085
> > Jul 21 09:57:13 boldsoft kernel: wcfxs1: <Wildcard TDM400P REV H> port
> > 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at devic
> > e 9.0 on pci2
> > Jul 21 09:57:13 boldsoft kernel: FXS Attach for wcfxs1: deviceID :
> > 0xe159
> > Jul 21 09:57:13 boldsoft kernel: Freshmaker version: 85
> > Jul 21 09:57:13 boldsoft kernel: 00 != 85
> > Jul 21 09:57:13 boldsoft kernel: 01 != 85
> > Jul 21 09:57:13 boldsoft kernel: 02 != 85
> > Jul 21 09:57:13 boldsoft kernel: 03 != 85
> > Jul 21 09:57:13 boldsoft kernel: 04 != 85
> > Jul 21 09:57:13 boldsoft kernel: 05 != 85
> > Jul 21 09:57:13 boldsoft kernel: 06 != 85
> > Jul 21 09:57:13 boldsoft kernel: 07 != 85
> > Jul 21 09:57:13 boldsoft kernel: 08 != 85
> > Jul 21 09:57:13 boldsoft kernel: 09 != 85
> >
> > ReplyForward
> >
> >
> > postmaster at telappliant.com
> > This is an automatically generated Delivery Status Notification. Delivery
> > to ...
> > Aug 2 (21 hours ago)
> >
> > Mail Delivery System
> > <MAILER-DAEMON at lists.digium.com> to me
> > More options Aug 2 (21 hours ago)
> > This is the Postfix program at host lists.digium.com.
> >
> > I'm sorry to have to inform you that your message could not
> > be delivered to one or more recipients. It's attached below.
> >
> > For further assistance, please send mail to <postmaster>
> >
> > If you do so, please include this problem report. You can
> > delete your own text from the attached returned message.
> >
> > The Postfix program
> >
> > <asterisk-dev at lists.digium.com>: mail forwarding loop for
> > asterisk-dev at lists.digium.com
> >
> >
> > Final-Recipient: rfc822; asterisk-dev at lists.digium.com
> > Action: failed
> > Status: 5.0.0
> > Diagnostic-Code: X-Postfix; mail forwarding loop for
> > asterisk-dev at lists.digium.com
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Ganbold Tsagaankhuu <ganbold at gmail.com>
> > To: asterisk-users at lists.digium.com, asterisk-dev at lists.digium.com,
> > asterisk-bsd at lists.digium.com
> > Date: Tue, 2 Aug 2005 10:38:50 +0900
> > Subject: [Asterisk-Dev] Questions on Asterisk and CallerID
> > Hello,
> >
> > I have few questions about Asterisk.
> > I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago.
> >
> > 1.I couldn't find Asterisk version using "asterisk -V" command.
> >
> > How can I to find version information?
> >
> > 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on
> > it.
> >
> > I tried Asterisk CallerID feature, but unable to get it.
> > I tried callerid signaling V23, Bell202, DTMF, no success. Finally, I
> > found in our country (Mongolia) PSTN/Cellular provider send FSK/ETSI
> > type of CallerID.
> >
> > Is Asterisk support such type of CallerID signaling?
> >
> > If no, is there any way to get it?
> >
> > 3.I enjoyed Asterisk most of feature until now. I registered X-Pro
> > softphone, SIP analog and analog phone connected to FXS port too.
> >
> > There one problem is I am unable to make outgoing call from SIP phone,
> > softphone, analog phone through FXO port.
> >
> > Following is my Asterisk configuration:
> > ------------------------------------------
> > zaptel.conf
> > loadzone=us
> > defaultzone=us
> > fxsks=1
> > fxoks=2
> >
> >
> > zapata.conf
> > context=bell
> > signaling=fxs_ks
> > group=1
> > channel => 1
> >
> >
> > context=home
> > group=2
> > signalling=fxo_ks
> > channel => 2
> >
> >
> > sip.conf
> > [88888888]
> > type=friend
> > username=88888888
> > ;secret=1111
> > host=dynamic
> > nat=yes
> > defaultip=192.168.1.5
> > context=bell
> > reinvite=no
> > canreinvite=no
> > callerid=88888888
> > mailbox=88888888 at local
> > allow=g729
> > allow=g723
> > allow=all
> >
> >
> > [99999999]
> > type=friend
> > username=99999999
> > ;secret=1111
> > host=dynamic
> > nat=yes
> > defaultip=192.168.1.1
> > context=bell
> > reinvite=no
> > canreinvite=no
> > callerid=99999999
> > mailbox=99999999 at local
> > allow=g729
> > allow=g723
> >
> >
> > extensions.conf
> > [bell]
> > exten => s,1,Wait
> > exten => s,2,Answer
> > exten => s,3,Playback(greetings)
> > exten => s,4,WaitExten
> >
> >
> > ; used to record prompts
> > exten => 205,1,Wait(2)
> > exten => 205,2,Record(/tmp/greetings:alaw)
> > exten => 205,3,Wait(2)
> > exten => 205,4,Playback(/tmp/greetings)
> > exten => 205,5,Wait(2)
> > exten => 205,6,Hangup
> >
> >
> > exten => 111,1,Dial(CONSOLE/dsp)
> > exten => 111,2,Hangup
> >
> >
> > exten => 100,1,Answer
> > exten => 100,2,MusicOnHold()
> > exten => 100,4,Hangup
> >
> >
> > exten => 200,1,VoicemailMain
> >
> >
> > exten => 300,1,Dial(Zap/2)
> >
> >
> > exten => 400,1,Voicemail(99999)
> >
> >
> > exten => 800,1,MeetMe(100|Mp)
> > exten => 800,2,Hangup
> >
> >
> > exten => 601,1,WaitMusicOnHold(30)
> >
> >
> > exten => 700,1,Dial(SIP/88888888,20,rt)
> > exten => 900,1,Dial(SIP/99999999,20,rt)
> >
> >
> > exten => _ZXXX,1,Answer
> > exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _ZXXXX,1,Answer
> > exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXX,1,Answer
> > exten => _NXXXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXXXX,1,Answer
> > exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
> >
> >
> > [home]
> > exten => s,1,Playback(greetings)
> > exten => 100,1,Answer
> > exten => 100,2,MusicOnHold()
> > exten => 100,4,Hangup
> >
> >
> > exten => 111,1,Dial(CONSOLE/dsp)
> > exten => 111,4,Hangup
> >
> >
> > exten => 700,1,Dial(SIP/88888888,20,rt)
> > exten => 900,1,Dial(SIP/99999999,20,rt)
> >
> >
> > exten => _ZXXX,1,Answer
> > exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _ZXXXX,1,Answer
> > exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXX,1,Answer
> > ;exten => _NXXXXX,2,SetVar(TIMEOUT(AbsoluteTimeout)=10)
> > exten => _NXXXXX,3,Dial(Zap/g1/${EXTEN})
> > exten => _NXXXXXXX,1,Answer
> > exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
> >
> >
> > I can to see following in /var/log/messages when I make outgoing call.
> >
> >
> > Jul 20 00:50:26 boldsoft kernel: Zapata Telephony Interface Registered
> > on major 196
> > Jul 20 00:50:26 boldsoft kernel: ZapTel device: vendor=e159 device=1
> > subvendor=8085
> > Jul 20 00:50:26 boldsoft kernel: wcfxo0: <Wildcard X101P> port
> > 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at device 9.0 on
> > pci2
> > Jul 20 00:50:26 boldsoft kernel: ZapTel Attach for wcfxo0: deviceID :
> > 0xe159
> > Jul 20 00:50:26 boldsoft kernel: wcfxo: DAA mode is 'FCC'
> > Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
> > Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
> > Jul 20 00:50:33 boldsoft kernel: FXS device: vendor=e159 device=1
> > subvendor=b100
> > Jul 20 00:50:33 boldsoft kernel: wcfxs0: <Wildcard TDM400P REV E/F>
> > port 0xec00-0xecff mem 0xfafff000-0xfaffffff irq 17 at dev
> > ice 8.0 on pci2
> > Jul 20 00:50:33 boldsoft kernel: FXS Attach for wcfxs0: deviceID :
> > 0xe159
> > Jul 20 00:50:33 boldsoft kernel: Freshmaker version: 63
> > Jul 20 00:50:33 boldsoft kernel: Freshmaker passed register test
> > Jul 20 00:50:35 boldsoft kernel: Module 0: Installed -- AUTO FXS
> > Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> > Jul 20 00:50:35 boldsoft kernel: Module 1: Not installed
> > Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> > Jul 20 00:50:35 boldsoft kernel: Module 2: Not installed
> > Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> > Jul 20 00:50:35 boldsoft kernel: Module 3: Not installed
> > Jul 20 00:50:35 boldsoft kernel: Found a Wildcard TDM: Wildcard
> > TDM400P
> > REV E/F (4 modules)
> > Jul 20 00:50:39 boldsoft kernel: Registered tone zone 0 (United States
> > / North America)
> > Jul 21 02:36:28 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:39:43 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:45:35 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:45:56 boldsoft kernel: DIAL: T99114909w
> > Jul 21 02:47:09 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:47:56 boldsoft kernel: DIAL: T345595w
> > Jul 21 02:48:16 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:48:57 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:49:20 boldsoft kernel: DIAL: T345598w
> > Jul 21 02:49:43 boldsoft kernel: DIAL: T322473w
> > Jul 21 02:50:02 boldsoft kernel: DIAL: T99114909w
> > Jul 21 02:50:27 boldsoft kernel: DIAL: T99190040w
> > Jul 21 02:50:48 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:51:11 boldsoft kernel: DIAL: T91911187w
> > Jul 21 02:54:01 boldsoft kernel: DIAL: T95158330w
> > Jul 21 02:54:33 boldsoft kernel: DIAL: T345598w
> > Jul 21 03:04:35 boldsoft kernel: DIAL: T345598w
> > Jul 21 03:06:00 boldsoft kernel: DIAL: T99190040w
> > Jul 21 03:06:24 boldsoft kernel: DIAL: T11345598w
> > Jul 21 03:12:11 boldsoft kernel: DIAL: T1109w
> > Jul 21 03:13:59 boldsoft kernel: DIAL: T18340w
> > Jul 21 03:14:18 boldsoft kernel: DIAL: T18000w
> > Jul 21 03:14:31 boldsoft kernel: DIAL: T18300w
> > Jul 21 03:14:46 boldsoft kernel: DIAL: T345598w
> > Jul 21 03:15:16 boldsoft kernel: DIAL: T99190040w
> > Jul 21 03:15:46 boldsoft kernel: DIAL: T686000w
> > Jul 21 03:16:09 boldsoft kernel: DIAL: T341341w
> > Jul 21 03:16:39 boldsoft kernel: DIAL: T99114909w
> > Jul 21 03:17:02 boldsoft kernel: DIAL: T345598w
> > Jul 21 09:47:15 boldsoft kernel: DIAL: T345598w
> >
> > In Mongolia PSTN local number has 5-6 digits, Mobile number has 8
> > digits and special enquiry service with 3-4 digits.
> >
> > I can to hear BUSY TONE after several seconds.
> >
> > 4.There another problem with Wildcard TDM400P REV E/F FXS port.
> >
> > After ~30mins I can't to hear DIALTONE on analog phone connected to
> > FXS port.
> >
> > and I got following in /var/log/messages
> > Jul 21 01:35:39 boldsoft kernel: Power alarm on module 1, resetting!
> > Jul 21 09:57:06 boldsoft kernel: Freed a Wildcard
> > Jul 21 09:57:06 boldsoft kernel: ZapTel detach!
> > Jul 21 09:57:06 boldsoft kernel: wcfxo0: detached
> > Jul 21 09:57:13 boldsoft kernel: FXS device: vendor=e159 device=1
> > subvendor=8085
> > Jul 21 09:57:13 boldsoft kernel: wcfxs1: <Wildcard TDM400P REV H> port
> > 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at devic
> > e 9.0 on pci2
> > Jul 21 09:57:13 boldsoft kernel: FXS Attach for wcfxs1: deviceID :
> > 0xe159
> >Jul 21 09:57:13 boldsoft kernel: Freshmaker version: 85
> > Jul 21 09:57:13 boldsoft kernel: 00 != 85
> > Jul 21 09:57:13 boldsoft kernel: 01 != 85
> > Jul 21 09:57:13 boldsoft kernel: 02 != 85
> > Jul 21 09:57:13 boldsoft kernel: 03 != 85
> > Jul 21 09:57:13 boldsoft kernel: 04 != 85
> > Jul 21 09:57:13 boldsoft kernel: 05 != 85
> > Jul 21 09:57:13 boldsoft kernel: 06 != 85
> > Jul 21 09:57:13 boldsoft kernel: 07 != 85
> > Jul 21 09:57:13 boldsoft kernel: 08 != 85
> > Jul 21 09:57:13 boldsoft kernel: 09 != 85
> > _______________________________________________
> > Asterisk-BSD mailing list
> > Asterisk-BSD at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> >
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>
More information about the Asterisk-BSD
mailing list