This is more like freepbx configuration question . I have 3 nufone toll free did's which ring on 3 different ring groups having 3 extensions each . I made 3 devices in nufone's web interface and made 3 peer trunks in freepbx ( yes using freepbx for everything ) which registers to nufone server with 3 diff username and password ( in format
<a href="http://user:pass@proxy-1.nufone.net/800XXXXXXX">user:pass@proxy-1.nufone.net/800XXXXXXX</a> for 3 different numbers with one number in each trunk ) . After this i made 3 inbound routes ( from freepbx again ) for each 800XXXXXXX number which then forwards to my ring groups properly . This crazy setup was working for sometime properly for all three numbers but suddenly it stopped working since few days .. NOW if i forward my toll free did to sip address like
SIP:800XXXXXX@myip then i can recieve calls to my ring groups properly from nufone but if i forward toll freee number to one of my trunks ( 3 trunks i made in asterisk and registered with them ) then i dont get any call and aasterisk cli doesnt report any incoming call at all .I can pobably configure it by editing my
extensions.conf by hand but i want it to work with freepbx properly ( managing ring groups and all stuff is easy in it ) .<br>The problem is not at nufone's end because if i register one of softphone directly with them and then forward this DID to device .. my softphone ring fine . Problem is in my freepbx configuration for sure . Whats the other possible configuration for this kind of situation ( 3number from same provider forwarded to 3 ring groups )
<br>My did's work fine if i forward them to sip location from nufone setup but that way i cant limit number of incoming calls ( i want to limit them ! ) so i want it to land on one of my trunks .. where i can set call limit .
<br>This might be very dumb question . Thx for help :) .<br><br><br> Please dont turn this topic in another nufone hate topic .. i know many people had lot of problems with them but they work fine for me until now ...<br>