[asterisk-biz] Problem with getting Caller ID by TDM2400P

[Stelios Koroneos]

On Mon, 2012-06-18 at 13:32 +0400, Nikolay Dmukha wrote:
> Hello.
> First sorry for my English.
>  I`m from Moscow, Russia.
> I have a problem with getting caller id.
> Dist: Elastix version 2.0.0.-36, Asterisk version 1.6.2.10.
> There is a digium card TDM2400P in the server. The analog phone line
> directly connected in this card. There is activated service "Euro
> Caller ID" on this phone number. 
> I`m sure that I get caller id from my provider, because I have tested
> it with fax device Panasonic.
> The routing of incoming calls:
> [code]incoming call->IVR("All calls are recorded")->redirect on
> ring-group[/code]
> During the calls I can see in log file:
> *******
> Starting simple switch on 'DAHDI/1-1'
> -- Executing [s at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=s") in new
> stack
> -- Executing [s at from-pstn:2] Gosub("DAHDI/1-1",
> "app-blacklist-check,s,1") in new stack
> -- Executing [s at app-blacklist-check:1] GotoIf("DAHDI/1-1",
> "0?blacklisted") in new stack
> -- Executing [s at app-blacklist-check:2] Set("DAHDI/1-1",
> "CALLED_BLACKLIST=1") in new stack
> -- Executing [s at app-blacklist-check:3] Return("DAHDI/1-1", "") in new
> stack
> -- Executing [s at from-pstn:3] ExecIf("DAHDI/1-1",
> "1 ?Set(CALLERID(name)=)") in new stack
> -- Executing [s at from-pstn:4] Set("DAHDI/1-1",
> "__CALLINGPRES_SV=allowed_not_screened") in new stack
> -- Executing [s at from-pstn:5] Set("DAHDI/1-1",
> "CALLERPRES()=allowed_not_screened") in new stack
> -- Executing [s at from-pstn:6] Set("DAHDI/1-1",
> "FAX_DEST=from-did-direct^1000^1") in new stack
> -- Executing [s at from-pstn:7] Answer("DAHDI/1-1", "") in new stack
> -- Executing [s at from-pstn:8] Wait("DAHDI/1-1", "4") in new stack
> -- Executing [s at from-pstn:9] Goto("DAHDI/1-1",
> "app-announcement-3,s,1") in new stack
> ...
> -- Executing [s at macro-user-callerid:19] Set("DAHDI/1-1",
> "CALLERID(number)=") in new stack
> -- Executing [s at macro-user-callerid:20] Set("DAHDI/1-1",
> "CALLERID(name)=") in new stack
> *******
> So I can see in  display phones of ring-group instead of phone number
> phrase "unknown".
> Before to write this message I have read a lot of forums. But I can`t
> solve my problem.
> My config files are:
> chan_dahdi.conf:
> *******
> [channels]
> 
> 
>                             
> context=from-pstn
> signalling=fxs_ks
> rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> faxdetect=incoming
> echotraining=800
> rxgain=5.0
> txgain=5.0
> callgroup=1
> pickupgroup=1
> callerid=asreceived
> cidsignalling=fsk
> cidstart=ring
> *******
> My provider said that the method of transmission is FSK.
> dahdi_channels.conf:
> *******
> ; Span 1: WCTDM/0 "Wildcard TDM2400P Board 1" (MASTER)
> ;;; line="1 WCTDM/0/0 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-pstn
> channel => 1
> callerid=
> group=
> context=default
> *******
> Also I have tried 
> *******
> sendcalleridafter=1, sendcalleridafter=2
> *******
> but had no result:(
> Maybe somebody can help me.
> WBR.
> 


Here is an old post i did which mentions some tools and techniques to
use to help you solve dtmf issues 
http://skoroneos.blogspot.gr/2009/12/solving-asterisk-dtmf-callerid-issues.html