[asterisk-biz] Asterisk card offer

[Brad Bendy]

Are these Digium cards or your brand, ie: not Digium?

On Tue, 2010-05-11 at 12:00 +0800, Andy Spring wrote:
> Dear Everyone,
>  
> Our company now can provide some models of asterisk card, both the
> quality and price are very good, they come with new technology, based
> on digium card.
> Here below is our TE405P details to show to you everyone, we have also
> some other models of 
> AX-4T Four T1 PCI Card ;
> TDM410P Asterisk card;
> TDM800P Asterisk card;
> TE110P Asterisk card; 
> Asterisk card with 2 FXO + 2 FXS modules
> If anyone is interested in, please kindly do not hesitate to let me
> know, so I can send the details to you for your reference. Thanks.
>  
> Details of TE405P:
> The TE405P supports both E1, T1, J1 environments and is selectable on
> a per-card or per-port basis. This feature enables signaling
> translation between E1, T1, and J1 equipment and allows inexpensive T1
> channel banks to connect with E1 circuits. Because the TE405P improves
> I/O speed by up to 10 times, the result is reduced CPU usage and
> increased card density per server.
> Digium has designed the TE405P to be fully compatible with existing
> software applications and it is fully integrated with the Asterisk
> Open Source PBX/IVR platform. Also, the open source driver supports an
> API interface for custom application development. With the combination
> of Digium Hardware and Asterisk software, numerous combinations of
> telephony configurations are possible. From the traditional PBX to
> VoIP Gateways, Digium solutions are paving the way for a new
> generation of worldwide communications.
> 
> The TE405P supports industry standard telephony and data protocols,
> including Primary Rate ISDN (both N. American and Standard Euro)
> protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data
> modes. Both line-side and trunk-side interfaces are supported, also
> included are advanced call features.
> 
> The TE405P is for use only with a 5.0 volt PCI slot. The TE410P is for
> use only with a 3.3 volt PCI slot - typically available on newer
> server motherboards and in 64-bit PCI bus architectures
> 
>  
> Thanks
>  
> Best regards
> -- 
> andy
> andyspr at gmail.com
> 
> -- 
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-biz