[asterisk-biz] proper analog behavior using an ATA

Jim Houser jhouser at trustamerifirst.com
Tue Oct 7 09:31:59 CDT 2008


I've been doing a little work with the Linksys PAP2, firmware 3.1.5(LS), but have not been able to get it to pass caller if to analog phones or perform properly with the flash key.

I understand why the caller id does not pass as the analog phones expect a CID data burst as what comes in from Telco and the PAP does not do this but no matter what I do the flash timing fails.  

Have you worked with this model?  Should I forget it and go to the spa2102 for total success?  Has the spa2102 passed caller id to analog phones for you?

Thanks,
Jim

----- Original Message -----
From: "Sergey Tamkovich" <serg at voipsolutions.ru>
To: "Commercial and Business-Oriented Asterisk Discussion" <asterisk-biz at lists.digium.com>
Sent: Tuesday, October 7, 2008 2:23:01 AM GMT -06:00 US/Canada Central
Subject: Re: [asterisk-biz] proper analog behavior using an ATA

Jim Houser wrote:
>
> Thanks for allowing me to rant, (fighting with a Linksys PAP2T on a home office Asterisk switch right now).
>
> Jim
>   

Personally I prefer to use linksys SPA2102, i have a pretty big 
experience with this device. It works good for me and has a lot of 
settings for tuning. The main drawback - is a lack of solid documentation.

For 1-4 fxs ports i use spa2102, for 5-16 fxs ports - spa8000 and for 
more then 16 fxs ports i prefer to use Quintum AX.

> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-biz
>   


_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-biz



More information about the asterisk-biz mailing list