[Asterisk-biz] Clustering Solutions for Asterisk

[Paul]

Jon,
Thank you very much for access to your hard work.  I will look it over
carefully.

:)
Paul

>Paul,

>If you don't load the drivers for the T-1 hardware then you should be
>able to simply run a pass-through cable connecting to your second
>server's T-1 hardware.  This will work on fail-over only if the primary
>powers down - which you can do using a UPS that is intelligent.

>I use a set of scripts that mirror the primary to a secondary and keep
>the secondary up-to-date (within 24 hours of changes to the primary).

>http://www.trilug.org/~jonc/Failover_scripts/

>I've been using the same set of scripts for about 5 years. They work
>fine for all my Master/Slave setups.

>I'm new to the list, but we've been using Asterisk for corporate use for
>over three years now.

>Jon Carnes
>FeatureTel