[asterisk-addons-commits] mmichelson: branch 1.4 r621 - in /branches/1.4/channels: ./ ooh323c/src/
SVN commits to the Asterisk addons project
asterisk-addons-commits at lists.digium.com
Wed Jun 4 11:58:00 CDT 2008
Author: mmichelson
Date: Wed Jun 4 11:58:00 2008
New Revision: 621
URL: http://svn.digium.com/view/asterisk-addons?view=rev&rev=621
Log:
------------------------------------------------------------------------
r620 | mmichelson | 2008-06-04 11:55:58 -0500 (Wed, 04 Jun 2008) | 15 lines
A few changes:
1. Add error-checking to the call to ooReadAndProcessStackCommands in oochannels.c
2. (1.2 only) There was a char * being used before being set. This was causing an almost
immediate crash when ooh323 would load. This commit fixes that issue.
3. Most importantly, fix a security issue wherein arbitrary data could be sent to ooh323's
command stack listening socket causing a remote crash. See AST-2008-009 for more details.
(closes issue #12756)
Reported by: tzafrir
Patches:
ooh323_pipev3.diff uploaded by putnopvut (license 60)
Tested by: putnopvut
------------------------------------------------------------------------
Modified:
branches/1.4/channels/chan_ooh323.c
branches/1.4/channels/ooh323c/src/ooCmdChannel.c
branches/1.4/channels/ooh323c/src/ooCmdChannel.h
branches/1.4/channels/ooh323c/src/oochannels.c
branches/1.4/channels/ooh323c/src/ooh323ep.c
branches/1.4/channels/ooh323c/src/ooh323ep.h
Modified: branches/1.4/channels/chan_ooh323.c
URL: http://svn.digium.com/view/asterisk-addons/branches/1.4/channels/chan_ooh323.c?view=diff&rev=621&r1=620&r2=621
==============================================================================
--- branches/1.4/channels/chan_ooh323.c (original)
+++ branches/1.4/channels/chan_ooh323.c Wed Jun 4 11:58:00 2008
@@ -2651,7 +2651,6 @@
ast_log(LOG_ERROR, "Capabilities failure for OOH323. OOH323 Disabled.\n");
return 1;
}
-
/* Create H.323 listener */
if(ooCreateH323Listener()!= OO_OK)
@@ -2662,15 +2661,7 @@
ooH323EpDestroy();
return 1;
}
-
- /* Create command Listener */
- if(ooH323EpCreateCmdListener(0) != OO_OK)
- {
- ast_log(LOG_ERROR, "OOH323 Command Listener creation failure. "
- "OOH323 DISABLED\n");
- ooH323EpDestroy();
- return 1;
- }
+
if(ooh323c_start_stack_thread() <0)
{
ast_log(LOG_ERROR, "Failed to start OOH323 stack thread. "
Modified: branches/1.4/channels/ooh323c/src/ooCmdChannel.c
URL: http://svn.digium.com/view/asterisk-addons/branches/1.4/channels/ooh323c/src/ooCmdChannel.c?view=diff&rev=621&r1=620&r2=621
==============================================================================
--- branches/1.4/channels/ooh323c/src/ooCmdChannel.c (original)
+++ branches/1.4/channels/ooh323c/src/ooCmdChannel.c Wed Jun 4 11:58:00 2008
@@ -27,104 +27,48 @@
extern OOH323EndPoint gH323ep;
OOSOCKET gCmdChan = 0;
-char gCmdIP[20];
-int gCmdPort = OO_DEFAULT_CMDLISTENER_PORT;
-
-int ooCreateCmdListener()
-{
- int ret=0;
- OOIPADDR ipaddrs;
-
- OOTRACEINFO3("Creating CMD listener at %s:%d\n",
- gH323ep.signallingIP, gH323ep.cmdPort);
- if((ret=ooSocketCreate (&gH323ep.cmdListener))!=ASN_OK)
- {
- OOTRACEERR1("ERROR: Failed to create socket for CMD listener\n");
- return OO_FAILED;
- }
- ret= ooSocketStrToAddr (gH323ep.signallingIP, &ipaddrs);
- if((ret=ooSocketBind (gH323ep.cmdListener, ipaddrs,
- gH323ep.cmdPort))==ASN_OK)
- {
- ooSocketListen(gH323ep.cmdListener,5); /*listen on socket*/
- OOTRACEINFO1("CMD listener creation - successful\n");
- return OO_OK;
- }
- else
- {
- OOTRACEERR1("ERROR:Failed to create CMD listener\n");
- return OO_FAILED;
- }
-
- return OO_OK;
-}
+pthread_mutex_t gCmdChanLock;
int ooCreateCmdConnection()
{
- int ret=0;
- if((ret=ooSocketCreate (&gCmdChan))!=ASN_OK)
- {
+ int ret = 0;
+ int thePipe[2];
+
+ if ((ret = pipe(thePipe)) == -1) {
return OO_FAILED;
}
- else
- {
- /*
- bind socket to a port before connecting. Thus avoiding
- implicit bind done by a connect call. Avoided on windows as
- windows sockets have problem in reusing the addresses even after
- setting SO_REUSEADDR, hence in windows we just allow os to bind
- to any random port.
- */
-#ifndef _WIN32
- ret = ooBindPort(OOTCP,gCmdChan, gCmdIP);
-#else
- ret = ooBindOSAllocatedPort(gCmdChan, gCmdIP);
-#endif
-
- if(ret == OO_FAILED)
- {
- return OO_FAILED;
- }
+ pthread_mutex_init(&gCmdChanLock);
-
- if((ret=ooSocketConnect(gCmdChan, gCmdIP,
- gCmdPort)) != ASN_OK)
- return OO_FAILED;
-
- }
+ gH323ep.cmdSock = dup(thePipe[0]);
+ close(thePipe[0]);
+ gCmdChan = dup(thePipe[1]);
+ close(thePipe[1]);
return OO_OK;
}
int ooCloseCmdConnection()
{
- ooSocketClose(gH323ep.cmdSock);
+ close(gH323ep.cmdSock);
gH323ep.cmdSock = 0;
+ close(gCmdChan);
+ gCmdChan = 0;
+ pthread_mutex_destroy(&gCmdChanLock);
- return OO_OK;
-}
-
-int ooAcceptCmdConnection()
-{
- int ret;
-
- ret = ooSocketAccept (gH323ep.cmdListener, &gH323ep.cmdSock,
- NULL, NULL);
- if(ret != ASN_OK)
- {
- OOTRACEERR1("Error:Accepting CMD connection\n");
- return OO_FAILED;
- }
- OOTRACEINFO1("Cmd connection accepted\n");
return OO_OK;
}
int ooWriteStackCommand(OOStackCommand *cmd)
{
- if(ASN_OK != ooSocketSend(gCmdChan, (char*)cmd, sizeof(OOStackCommand)))
- return OO_FAILED;
+
+ pthread_mutex_lock(&gCmdChanLock);
+ if (write(gCmdChan, (char*)cmd, sizeof(OOStackCommand)) == -1) {
+ pthread_mutex_unlock(&gCmdChanLock);
+ return OO_FAILED;
+ }
+ pthread_mutex_unlock(&gCmdChanLock);
- return OO_OK;
+ return OO_OK;
}
@@ -135,7 +79,7 @@
int i, recvLen = 0;
OOStackCommand cmd;
memset(&cmd, 0, sizeof(OOStackCommand));
- recvLen = ooSocketRecv (gH323ep.cmdSock, buffer, MAXMSGLEN);
+ recvLen = read(gH323ep.cmdSock, buffer, MAXMSGLEN);
if(recvLen <= 0)
{
OOTRACEERR1("Error:Failed to read CMD message\n");
Modified: branches/1.4/channels/ooh323c/src/ooCmdChannel.h
URL: http://svn.digium.com/view/asterisk-addons/branches/1.4/channels/ooh323c/src/ooCmdChannel.h?view=diff&rev=621&r1=620&r2=621
==============================================================================
--- branches/1.4/channels/ooh323c/src/ooCmdChannel.h (original)
+++ branches/1.4/channels/ooh323c/src/ooCmdChannel.h Wed Jun 4 11:58:00 2008
@@ -45,23 +45,6 @@
*/
/**
- * This function creates a command listener. This is nothing but a tcp socket
- * in listen mode waiting for incoming connection on which the stack thread
- * will receive commands.
- *
- * @return OO_OK, on success; OO_FAILED, on failure
- */
-EXTERN int ooCreateCmdListener();
-
-/**
- * This function is used to accept an incoming connection request for command
- * channel.
- *
- * @return OO_OK, on success; OO_FAILED, on failure
- */
-EXTERN int ooAcceptCmdConnection();
-
-/**
* This function is used to setup a command connection with the main stack
* thread. The application commands are sent over this connection to stack
* thread.
Modified: branches/1.4/channels/ooh323c/src/oochannels.c
URL: http://svn.digium.com/view/asterisk-addons/branches/1.4/channels/ooh323c/src/oochannels.c?view=diff&rev=621&r1=620&r2=621
==============================================================================
--- branches/1.4/channels/ooh323c/src/oochannels.c (original)
+++ branches/1.4/channels/ooh323c/src/oochannels.c Wed Jun 4 11:58:00 2008
@@ -492,12 +492,6 @@
*nfds = *((int*)gH323ep.listener);
}
- if(gH323ep.cmdListener)
- {
- FD_SET(gH323ep.cmdListener, pReadfds);
- if(*nfds < (int)gH323ep.cmdListener)
- *nfds = (int)gH323ep.cmdListener;
- }
if(gH323ep.cmdSock)
{
FD_SET(gH323ep.cmdSock, pReadfds);
@@ -582,21 +576,12 @@
}
}
-
- if(gH323ep.cmdListener)
- {
- if(FD_ISSET(gH323ep.cmdListener, pReadfds))
- {
- if(ooAcceptCmdConnection() != OO_OK){
- OOTRACEERR1("Error:Failed to accept command connection\n");
- return OO_FAILED;
- }
- }
- }
-
if(gH323ep.cmdSock) {
if(FD_ISSET(gH323ep.cmdSock, pReadfds)) {
- ooReadAndProcessStackCommand();
+ if(ooReadAndProcessStackCommand() != OO_OK) {
+ /* ooReadAndProcessStackCommand prints an error message */
+ return OO_FAILED;
+ }
}
}
Modified: branches/1.4/channels/ooh323c/src/ooh323ep.c
URL: http://svn.digium.com/view/asterisk-addons/branches/1.4/channels/ooh323c/src/ooh323ep.c?view=diff&rev=621&r1=620&r2=621
==============================================================================
--- branches/1.4/channels/ooh323c/src/ooh323ep.c (original)
+++ branches/1.4/channels/ooh323c/src/ooh323ep.c Wed Jun 4 11:58:00 2008
@@ -24,8 +24,6 @@
ooEndPoint gH323ep;
-extern int gCmdPort;
-extern char gCmdIP[20];
extern DList g_TimerList;
int ooH323EpInitialize
@@ -127,9 +125,7 @@
ooSetTraceThreshold(OOTRCLVLINFO);
OO_SETFLAG(gH323ep.flags, OO_M_ENDPOINTCREATED);
- gH323ep.cmdListener = 0;
gH323ep.cmdSock = 0;
- gH323ep.cmdPort = OO_DEFAULT_CMDLISTENER_PORT;
return OO_OK;
}
@@ -145,7 +141,6 @@
if(localip)
{
strcpy(gH323ep.signallingIP, localip);
- strcpy(gCmdIP, localip);
OOTRACEINFO2("Signalling IP address is set to %s\n", localip);
}
@@ -154,19 +149,6 @@
gH323ep.listenPort = listenport;
OOTRACEINFO2("Listen port number is set to %d\n", listenport);
}
- return OO_OK;
-}
-
-int ooH323EpCreateCmdListener(int cmdPort)
-{
- if(cmdPort != 0)
- {
- gH323ep.cmdPort = cmdPort;
- gCmdPort = cmdPort;
- }
- if(ooCreateCmdListener() != OO_OK)
- return OO_FAILED;
-
return OO_OK;
}
@@ -373,13 +355,7 @@
gH323ep.listener = NULL;
}
- if(gH323ep.cmdListener != 0)
- {
- ooSocketClose(gH323ep.cmdListener);
- gH323ep.cmdListener = 0;
- }
-
- ooGkClientDestroy();
+ ooGkClientDestroy();
if(gH323ep.fptraceFile)
{
Modified: branches/1.4/channels/ooh323c/src/ooh323ep.h
URL: http://svn.digium.com/view/asterisk-addons/branches/1.4/channels/ooh323c/src/ooh323ep.h?view=diff&rev=621&r1=620&r2=621
==============================================================================
--- branches/1.4/channels/ooh323c/src/ooh323ep.h (original)
+++ branches/1.4/channels/ooh323c/src/ooh323ep.h Wed Jun 4 11:58:00 2008
@@ -147,9 +147,7 @@
OOInterface *ifList; /* interface list for the host we are running on*/
OOBOOL isGateway;
- OOSOCKET cmdListener;
OOSOCKET cmdSock;
- int cmdPort; /* default 7575 */
} OOH323EndPoint;
#define ooEndPoint OOH323EndPoint
@@ -165,19 +163,6 @@
*/
EXTERN int ooH323EpInitialize
(enum OOCallMode callMode, const char* tracefile);
-
-
-
-/**
- * This function is used to create a command listener for the endpoint.
- * Before any command is issued to the endpoint, command listener must be
- * created.
- * @param cmdPort Port number on which command listener waits for
- * incoming requests.
- *
- * @return OO_OK, on success; OO_FAILED, on failure
- */
-EXTERN int ooH323EpCreateCmdListener(int cmdPort);
/**
* This function is used to represent the H.323 application endpoint as
More information about the asterisk-addons-commits
mailing list