[zaptel-commits] tzafrir: branch 1.4 r4653 - /branches/1.4/kernel/xpp/utils/astribank_tool.c

[SVN commits to the Zaptel project]

Author: tzafrir
Date: Fri Jun 12 13:20:09 2009
New Revision: 4653

URL: http://svn.asterisk.org/svn-view/zaptel?view=rev&rev=4653
Log:
astribank_tool: Support 'reset' of old protocol as fallback

If astribank_tool fails to open a device when running a reset command,
try to reset the device with the command from the old (pre-MPP) protocol
(A single 0x20 byte). No support whatsoever for any other feature of the
old protocol.

This was accidentally left out of previous commits.

Modified:
    branches/1.4/kernel/xpp/utils/astribank_tool.c

Modified: branches/1.4/kernel/xpp/utils/astribank_tool.c
URL: http://svn.asterisk.org/svn-view/zaptel/branches/1.4/kernel/xpp/utils/astribank_tool.c?view=diff&rev=4653&r1=4652&r2=4653
==============================================================================
--- branches/1.4/kernel/xpp/utils/astribank_tool.c (original)
+++ branches/1.4/kernel/xpp/utils/astribank_tool.c Fri Jun 12 13:20:09 2009
@@ -31,6 +31,11 @@
 #include "debug.h"
 
 #define	DBG_MASK	0x80
+/* if enabled, adds support for resetting pre-MPP USB firmware - if we 
+ * failed opening a device and we were asked to reset it, try also the
+ * old protocol.
+ */
+#define SUPPORT_OLD_RESET
 
 static char	*progname;
 
@@ -106,6 +111,36 @@
 	return 0;
 }
 
+#ifdef SUPPORT_OLD_RESET
+/* Try to reset a device using USB_FW.hex, up to Xorcom rev. 6885 */
+int old_reset(const char* devpath)
+{
+	struct astribank_device *astribank;
+	int ret;
+	struct {
+		uint8_t		op;
+	} PACKED header = {0x20}; /* PT_RESET */
+	char *buf = (char*) &header;
+
+	/* Note that the function re-opens the connection to the Astribank
+	 * as any reference to the previous connection was lost when mpp_open
+	 * returned NULL as the astribank reference. */
+	astribank = astribank_open(devpath, 1);
+	if (!astribank) {
+		DBG("Failed re-opening astribank device for old_reset\n");
+		return -ENODEV;
+	}
+	ret = send_usb(astribank, buf, 1, 5000);
+
+	/* If we just had a reenumeration, we may get -ENODEV */
+	if(ret < 0 && ret != -ENODEV)
+			return ret;
+	/* We don't astribank_close(), as it has likely been
+	 * reenumerated by now. */
+	return 0;
+}	
+#endif /* SUPPORT_OLD_RESET */
+
 int main(int argc, char *argv[])
 {
 	char			*devpath = NULL;
@@ -164,6 +199,16 @@
 	DBG("Startup %s\n", devpath);
 	if((astribank = mpp_init(devpath)) == NULL) {
 		ERR("Failed initializing MPP\n");
+#ifdef SUPPORT_OLD_RESET
+		INFO("opt_reset = %s\n", opt_reset);
+		if (opt_reset) {
+			INFO("Trying old reset method\n");
+			if ((ret = old_reset(devpath)) != 0) {
+				ERR("Old reset method failed as well: %d\n", ret);
+			}
+		}
+#endif /* SUPPORT_OLD_RESET */
+
 		return 1;
 	}
 	show_hardware(astribank);