[svn-commits] newtonr: branch 1.8 r417076 - /branches/1.8/configs/features.conf.sample
SVN commits to the Digium repositories
svn-commits at lists.digium.com
Mon Jun 23 09:34:25 CDT 2014
Author: newtonr
Date: Mon Jun 23 09:34:17 2014
New Revision: 417076
URL: http://svnview.digium.com/svn/asterisk?view=rev&rev=417076
Log:
main/features - documentation - reformat examples and options in features.conf.sample to show clearly which options apply in which section
The features.conf sample can be a bit confusing about what parking options can be set only in the general context, or both in the general context (for the default parking lot) and in other parking lot contexts. A bug was filed due to confusion and a little googling will show lots of other confused users.
Despite some comments on the individual options, it still reads in a confusing way. In this patch I separate out those options with some headings in to attempt a better layout. I went ahead and modified other headings in the file, or added them to facilitate better visual scanning.
ASTERISK-23667 #close
Review: https://reviewboard.asterisk.org/r/3621/
Modified:
branches/1.8/configs/features.conf.sample
Modified: branches/1.8/configs/features.conf.sample
URL: http://svnview.digium.com/svn/asterisk/branches/1.8/configs/features.conf.sample?view=diff&rev=417076&r1=417075&r2=417076
==============================================================================
--- branches/1.8/configs/features.conf.sample (original)
+++ branches/1.8/configs/features.conf.sample Mon Jun 23 09:34:17 2014
@@ -3,23 +3,51 @@
;
[general]
-parkext => 700 ; What extension to dial to park. Set per parking lot.
-;parkext_exclusive=yes ; Specify that the parkext created for this parking lot
- ; will only access this parking lot. (default is no)
-parkpos => 701-720 ; What extensions to park calls on. (defafult parking lot)
- ; These need to be numeric, as Asterisk starts from the start position
- ; and increments with one for the next parked call.
- ; Set per parking lot.
-context => parkedcalls ; Which context parked calls are in (default parking lot)
- ; Set per parking lot.
-;parkinghints = no ; Add hints priorities automatically for parking slots (default is no).
- ; Set per parking lot.
-;parkingtime => 45 ; Number of seconds a call can be parked before returning.
- ; Set per parking lot. (default is 45 seconds)
-
+
+; OPTIONS THAT CAN ONLY BE SET IN THE GENERAL CONTEXT
+
+;featuredigittimeout = 1000 ; Max time (ms) between digits for
+ ; feature activation (default is 1000 ms)
+
+; Pickup Options
+;
+;pickupexten = *8 ; Configure the pickup extension. (default is *8)
+;pickupsound = beep ; to indicate a successful pickup (default: no sound)
+;pickupfailsound = beeperr ; to indicate that the pickup failed (default: no sound)
+
+; Transfer Options
+;
+;transferdigittimeout => 3 ; Number of seconds to wait between digits when transferring a call
+ ; (default is 3 seconds)
+;xfersound = beep ; to indicate an attended transfer is complete
+;xferfailsound = beeperr ; to indicate a failed transfer
+;atxfernoanswertimeout = 15 ; Timeout for answer on attended transfer default is 15 seconds.
+;atxferloopdelay = 10 ; Number of seconds to sleep between retries (if atxferdropcall = no)
+;atxfercallbackretries = 2 ; Number of times to attempt to send the call back to the transferer.
+ ; By default, this is 2.
+;atxferdropcall = no ; If someone does an attended transfer, then hangs up before the transferred
+ ; caller is connected, then by default, the system will try to call back the
+ ; person that did the transfer. If this is set to "yes", the callback will
+ ; not be attempted and the transfer will just fail.
+ ; For atxferdropcall=no to work properly, you also need to
+ ; define ATXFER_NULL_TECH in main/features.c. The reason the
+ ; code is not enabled by default is spelled out in the comment
+ ; block near the top of main/features.c describing ATXFER_NULL_TECH.
+
+; Parking Options
+;
+; These options apply to all parking lots, including the default lot defined in
+; the general context.
+;
+;courtesytone = beep ; Sound file to play to when someone picks up a parked call
+ ; and also when the Touch Monitor is activated/deactivated.
+ ; Default is no tone.
+;parkedplay = caller ; Who to play courtesytone to when picking up a parked call.
+ ; One of: parked, caller, both (default is caller)
+;parkeddynamic = yes ; Enables dynamically created parkinglots. (default is no)
+;adsipark = yes ; if you want ADSI parking announcements
;comebacktoorigin = yes ; Setting this option configures the behavior of call parking when the
; parked call times out (See the parkingtime option). The default value is 'yes'.
- ; Operates on all parking lots.
;
; 'yes' - When the parked call times out, attempt to send the call back to the peer
; that parked this call. This is done by saving off the name of the channel
@@ -46,60 +74,44 @@
; During the timeout procedure, the following variable is set
; PARKINGSLOT - extension that the call was parked in prior to timing out
-;courtesytone = beep ; Sound file to play to when someone picks up a parked call
- ; and also when the Touch Monitor is activated/deactivated.
- ; Default is no tone.
-;parkedplay = caller ; Who to play courtesytone to when picking up a parked call.
- ; One of: parked, caller, both (default is caller)
- ; Operates on all parking lots.
+
+; OPTIONS THAT CAN BE SET PER PARKING LOT
+;
+; If these options are set in the general context, they will *only* apply to the default
+; parking lot. If set in any other lot, they will *only* apply to that lot.
+
+parkext => 700 ; What extension to dial to park. This option can take any alphanumeric string.
+ ; (default is 700 for all lots)
+;parkext_exclusive=yes ; Specify that the parkext created for this parking lot
+ ; will only access this parking lot. (default is no for all lots)
+parkpos => 701-750 ; What extensions to park calls on.
+ ; (default is 701-750 for the default lot and blank for custom lots)
+ ; These need to be numeric, as Asterisk starts from the start position
+ ; and increments with one for the next parked call. Hence, leading zeros
+ ; and non-numerical characters will be ignored.
+context => parkedcalls ; Which context parked calls are in (default is parkedcalls for the default lot and blank for custom lots)
+;parkinghints = no ; Add hints priorities automatically for parking slots (default is no for all lots).
+;parkingtime => 45 ; Number of seconds a call can be parked before returning.
+ ; (default is 45 for all lots)
;parkedcalltransfers = caller ; Enables or disables DTMF based transfers when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
- ; Set per parking lot.
+ ; one of: callee, caller, both, no (default is no for all lots)
;parkedcallreparking = caller ; Enables or disables DTMF based parking when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
- ; Set per parking lot.
+ ; one of: callee, caller, both, no (default is no for all lots)
;parkedcallhangup = caller ; Enables or disables DTMF based hangups when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
- ; Set per parking lot.
+ ; one of: callee, caller, both, no (default is no for all lots)
;parkedcallrecording = caller ; Enables or disables DTMF based one-touch recording when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
- ; Set per parking lot.
-;parkeddynamic = yes ; Enables dynamically created parkinglots. (default is no)
- ; Operates on all parking lots.
-;adsipark = yes ; if you want ADSI parking announcements
- ; Operates on all parking lots.
+ ; one of: callee, caller, both, no (default is no for all lots)
;findslot => next ; Continue to the 'next' free parking space.
- ; Defaults to 'first' available
- ; Set per parking lot.
+ ; (Default is 'first' for all lots)
;parkedmusicclass=default ; This is the MOH class to use for the parked channel
; as long as the class is not set on the channel directly
- ; using Set(CHANNEL(musicclass)=whatever) in the dialplan
- ; Set per parking lot.
-
-;transferdigittimeout => 3 ; Number of seconds to wait between digits when transferring a call
- ; (default is 3 seconds)
-;xfersound = beep ; to indicate an attended transfer is complete
-;xferfailsound = beeperr ; to indicate a failed transfer
-;pickupexten = *8 ; Configure the pickup extension. (default is *8)
-;pickupsound = beep ; to indicate a successful pickup (default: no sound)
-;pickupfailsound = beeperr ; to indicate that the pickup failed (default: no sound)
-;featuredigittimeout = 1000 ; Max time (ms) between digits for
- ; feature activation (default is 1000 ms)
-;atxfernoanswertimeout = 15 ; Timeout for answer on attended transfer default is 15 seconds.
-;atxferdropcall = no ; If someone does an attended transfer, then hangs up before the transferred
- ; caller is connected, then by default, the system will try to call back the
- ; person that did the transfer. If this is set to "yes", the callback will
- ; not be attempted and the transfer will just fail.
- ; For atxferdropcall=no to work properly, you also need to
- ; define ATXFER_NULL_TECH in main/features.c. The reason the
- ; code is not enabled by default is spelled out in the comment
- ; block near the top of main/features.c describing ATXFER_NULL_TECH.
-;atxferloopdelay = 10 ; Number of seconds to sleep between retries (if atxferdropcall = no)
-;atxfercallbackretries = 2 ; Number of times to attempt to send the call back to the transferer.
- ; By default, this is 2.
-
-;
-;*** Define another parking lot
+ ; using Set(CHANNEL(musicclass)=whatever) in the dialplan.
+ ; (Default is 'default' for default parking lot. Non-default parkinglots
+ ; don't specify a class so the class is picked by the channel put on hold
+ ; which has the 'default' class by default.)
+
+
+; EXAMPLE NON-DEFAULT PARKING LOT DEFINITION
;
; You can set parkinglot with the CHANNEL dialplan function
; or by setting 'parkinglot' directly in the channel configuration file.
@@ -113,10 +125,11 @@
;parkpos => 800-850
;findslot => next
+; EXAMPLE DTMF FEATURE MAP
+;
; Note that the DTMF features listed below only work when two channels have answered and are bridged together.
; They can not be used while the remote party is ringing or in progress. If you require this feature you can use
; chan_local in combination with Answer to accomplish it.
-
[featuremap]
;blindxfer => #1 ; Blind transfer (default is #) -- Make sure to set the T and/or t option in the Dial() or Queue() app call!
@@ -125,6 +138,10 @@
;atxfer => *2 ; Attended transfer -- Make sure to set the T and/or t option in the Dial() or Queue() app call!
;parkcall => #72 ; Park call (one step parking) -- Make sure to set the K and/or k option in the Dial() app call!
;automixmon => *3 ; One Touch Record a.k.a. Touch MixMonitor -- Make sure to set the X and/or x option in the Dial() or Queue() app call!
+
+
+; EXAMPLE DYNAMIC FEATURES APPLICATION MAP
+;
[applicationmap]
; Note that the DYNAMIC_FEATURES channel variable must be set to use the features
More information about the svn-commits
mailing list