[svn-commits] sruffell: tag tools/2.5.0.2 r10260 - in /tools/tags/2.5.0.2: .version ChangeLog

SVN commits to the Digium repositories svn-commits at lists.digium.com
Fri Oct 21 17:17:24 CDT 2011


Author: sruffell
Date: Fri Oct 21 17:17:20 2011
New Revision: 10260

URL: http://svnview.digium.com/svn/dahdi?view=rev&rev=10260
Log:
Importing files for 2.5.0.2 release.

Added:
    tools/tags/2.5.0.2/.version   (with props)
    tools/tags/2.5.0.2/ChangeLog   (with props)

Added: tools/tags/2.5.0.2/.version
URL: http://svnview.digium.com/svn/dahdi/tools/tags/2.5.0.2/.version?view=auto&rev=10260
==============================================================================
--- tools/tags/2.5.0.2/.version (added)
+++ tools/tags/2.5.0.2/.version Fri Oct 21 17:17:20 2011
@@ -1,0 +1,1 @@
+2.5.0.2

Propchange: tools/tags/2.5.0.2/.version
------------------------------------------------------------------------------
    svn:eol-style = native

Propchange: tools/tags/2.5.0.2/.version
------------------------------------------------------------------------------
    svn:keywords = none

Propchange: tools/tags/2.5.0.2/.version
------------------------------------------------------------------------------
    svn:mime-type = text/plain

Added: tools/tags/2.5.0.2/ChangeLog
URL: http://svnview.digium.com/svn/dahdi/tools/tags/2.5.0.2/ChangeLog?view=auto&rev=10260
==============================================================================
--- tools/tags/2.5.0.2/ChangeLog (added)
+++ tools/tags/2.5.0.2/ChangeLog Fri Oct 21 17:17:20 2011
@@ -1,0 +1,1692 @@
+2011-10-21  Shaun Ruffell <sruffell at digium.com> 
+
+	* dahdi-tools version 2.5.0.2 released.
+
+2011-10-21 22:12 +0000 [r10255-10256]  Shaun Ruffell <sruffell at digium.com>
+
+	* xpp/perl_modules/Dahdi/Span.pm: dahdi_genconf: Use 'dahdi_scan'
+	  to determine span_type for B410P cards. The wcb4xxp driver does
+	  not put enough information in the proc filesystem to determine if
+	  the ports are in TE or NT mode. Previously the ports would always
+	  just setup the dahdi-channels.conf file in TE mode. After this
+	  change the dahdi_scan utility is used to detect if the ports are
+	  in TE or NT mode and setup dahdi-channels.conf appropriately.
+	  Internal-Issue-ID: DAHTOOL-54 Signed-off-by: Shaun Ruffell
+	  <sruffell at digium.com> Origin:
+	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10214
+
+	* xpp/perl_modules/Dahdi/Span.pm: dahdi_genconf: Assume spans with
+	  unknown term types are software selectable. Resolves a regression
+	  on the 2.5 branch that would result in: $ dahdi_genconf
+	  dahdi_genconf: missing default group (termtype=UNKNOWN) E1 / T1
+	  spans use software configuration to set CPE / NET mode. This
+	  patch will just assume that a termtype is software selectable if
+	  it was "UNKNOWN" when first scanning the span. Internal-Issue-ID:
+	  DAHTOOL-55 Signed-off-by: Shaun Ruffell <sruffell at digium.com>
+	  Tested-by: David Purdue <support at noojee.com.au> Origin:
+	  http://svnview.digium.com/svn/dahdi?view=rev&rev=10213
+
+2011-09-07 07:11 +0000 [r10188]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/waitfor_xpds: xpp: waitfor_xpds: higher and configurable
+	  timeout On several pathological cases we may need to wait more
+	  than 40 seconds. Make that timeout configurable.
+
+2011-09-07  Shaun Ruffell <sruffell at digium.com> 
+
+	* dahdi-tools version 2.5.0.1 released.
+
+2011-09-07 07:11 +0000 [r10185-10188]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/waitfor_xpds: xpp: waitfor_xpds: higher and configurable
+	  timeout On several pathological cases we may need to wait more
+	  than 40 seconds. Make that timeout configurable.
+
+	* xpp/README.Astribank: README.Astribank: HWEC and build
+	  instructions Signed-off-by: Tzafrir Cohen
+	  <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Span.pm: xpp: pri_termtype: match complete
+	  SPAN patterns Match complete span patterns, to avoid pattern
+	  'SPAN/1' from matching e.g. span 12 (SPAN/12). Signed-off-by:
+	  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* README: Extra README fixes: 'th' and ztcfg Signed-off-by: Tzafrir
+	  Cohen <tzafrir.cohen at xorcom.com>
+
+2011-08-05  Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.5.0 released.
+
+2011-08-02 17:28 +0000 [r10085-10087]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* README: Extra README fixes: 'th' and ztcfg Signed-off-by: Tzafrir
+	  Cohen <tzafrir.cohen at xorcom.com>
+
+	* README: spelling: ocnfig.status and such Signed-off-by: Tzafrir
+	  Cohen <tzafrir.cohen at xorcom.com>
+
+2011-07-21  Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.5.0-rc2 released.
+
+2011-07-21 17:29 +0000 [r10071]  Russ Meyerriecks <rmeyerreicks at digium.com>
+
+	* patlooptest.c: patlooptest: Ignore the first buffered event Fixes
+	  the feature introduced in r9909 that allows patlooptest to
+	  monitor channel events. Patlooptest was reporting events that we
+	  don't care about, prior to reading from the channel. This fix
+	  ignore the first event read on a channel and reports all
+	  subsequent events properly. Signed-off-by: Russ Meyerriecks
+	  <rmeyerriecks at digium.com>
+
+2011-07-21 13:40 +0000 [r10068]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/astribank_hook: astribank_hook: startup lock and more *
+	  Silently exit right away if user did not set XPP_HOTPLUG_DAHDI. *
+	  Only one Astribank should be allowed to run the startup script: -
+	  Protect that section with a "lock" (symlinking a file). - Sadly
+	  we can't rely on /run and may have to wait for a r/w file-system.
+	  - And thus even this waiting needs to be run in the background as
+	  to not hold udev. Signed-off-by: Tzafrir Cohen
+	  <tzafrir.cohen at xorcom.com>
+
+2011-07-12  Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.5.0-rc1 released.
+
+2011-07-12 23:01 +0000 [r10040]  Shaun Ruffell <sruffell at digium.com>
+
+	* xpp/perl_modules/Dahdi/Span.pm: Span.pm: Process the
+	  /proc/dahdi/<x> files atomically. It is possible that the
+	  contents of the proc files can change while the perl modules are
+	  in the processing of processing them. Specifically, if lsdahdi is
+	  called on boot before the channels are configured, the channel
+	  will be "probed" to determine if it's an FXO or FXS channel and
+	  that can result in the output of proc changing. When the size of
+	  proc changes, the script can get confused about where the
+	  beginning of the next line is. This patch reads in the proc file
+	  completely into memory first, and then starts processing each of
+	  the lines. This resolves the "Unrecognized garbage 'INACTIVE)' in
+	  -" that is displayed on boot with the recent trunk of DAHDI.
+	  Signed-off-by: Shaun Ruffell <sruffell at digium.com> Signed-off-by:
+	  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+2011-07-11 18:02 +0000 [r10034]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/astribank_hexload.c: xpp: astribank_hexload: yes, we
+	  HAVE_OCTASIC Hardwire this for now, as this does not come from
+	  autoconf.
+
+2011-07-10 16:25 +0000 [r10030-10032]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/astribank_hexload.8, xpp/waitfor_xpds, xpp/README.Astribank,
+	  xpp/echo_loader.h (added), xpp/xpp_fxloader,
+	  xpp/astribank_tool.c, xpp/Makefile, xpp/astribank_allow.c, xpp,
+	  xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/astribank_hexload.c,
+	  xpp/dahdi_registration, xpp/echo_loader.c (added): xpp: support
+	  loading Octasic EC firmware Echo Cancellation firmware is loaded
+	  by xpp/stribank_hexload (Using the oct612x code). *
+	  astribank_hexload: options -O/-o/-A for handling the Octasic echo
+	  cancellation firmware. * astribank_tool: report that. *
+	  xpp_fxloader: Run astribank_hexload, if needed. * dahdi_perl: The
+	  EC module is an extra XPD, but not a "telephony device" and hence
+	  not a span. Deal with that. * waitfor_xpds: may need to wait a
+	  bit longer for firmware loading. Signed-off-by: Tzafrir Cohen
+	  <tzafrir.cohen at xorcom.com>
+
+	* xpp/oct612x (added): xpp: A copy of oct612x in dahdi-tools
+	  Include a copy of the oct612x Octasic echo canceller interface to
+	  be used by astribank_hexload to load the echo canceller firmware
+	  to a Xorcom Astribank.
+
+2011-07-05 20:13 +0000 [r10026]  Shaun Ruffell <sruffell at digium.com>
+
+	* system.conf.sample: system.conf.sample: Add note regarding cross
+	  connecting spans on B410P. There is an issue with the hardware on
+	  the B410P that makes it unreliable to connect one of the ports to
+	  another port for testing. Signed-off-by: Shaun Ruffell
+	  <sruffell at digium.com>
+
+2011-06-23 17:33 +0000 [r9986]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Xpp.pm: fix registration order for more
+	  than 9 Astribanks The sorting function for SORT_XPPORDER
+	  accidentally sorted the Astribank priorities from the xpp_order
+	  file (/etc/dahdi/xpp_order) lexicographically instead of
+	  numerically, that is: 10 before 2. Signed-off-by: Tzafrir Cohen
+	  <tzafrir.cohen at xorcom.com>
+
+2011-06-16 09:35 +0000 [r9979]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/dahdi_genconf, xpp/perl_modules/Dahdi/Span.pm: dahdi_genconf:
+	  apply termtype to Digium HA8 BRI Make the pri_termtype setting in
+	  genconf_parameters apply to any BRI/PRI carddeclared as "soft
+	  NT". ATM, this is only the Xorcom E1/T1 device and the Digium HA8
+	  (BRI) module of the TDM card. Signed-off-by: Tzafrir Cohen
+	  <tzafrir.cohen at xorcom.com> Acked-by: Shaun Ruffell
+	  <sruffell at digium.com>
+
+2011-06-07 19:44 +0000 [r9975]  Kinsey Moore <kmoore at digium.com>
+
+	* patgen.c, patlooptest.c, pattest.c: tools: Allow pattern tools to
+	  access channels above the device file limit pattest and patgen
+	  already had this capability, but there were cases in which they
+	  would act unexpectedly. Now, if the name specified is not a
+	  character device file, it will be treated as a channel number if
+	  possible. Acked-by: Shaun Ruffell <sruffell at digium.com>
+
+2011-06-07 10:28 +0000 [r9973]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/astribank_hexload.c: xpp: this is the right place for
+	  astribank_close()
+
+2011-05-24 15:14 +0000 [r9919-9920]  Shaun Ruffell <sruffell at digium.com>
+
+	* zonedata.c: zonedata: Add support for United Arab Emirates. This
+	  was provided for interop with analog lines provided by Etisilat.
+	  DAHDI-796. Signed-off-by: Shaun Ruffell <sruffell at digium.com>
+
+	* zonedata.c: zonedata: Add support for Costa Rica. Add in the
+	  costa Rica zonedata. (closes issue #19069) Reported by:
+	  desafiocostarica Signed-off-by: Shaun Ruffell
+	  <sruffell at digium.com>
+
+2011-04-18 21:20 +0000 [r9909]  Kinsey Moore <kmoore at digium.com>
+
+	* patlooptest.c: tools: Allow patlooptest to activate and handle
+	  buffer events The new buffer events code introduced in revision
+	  9905 gives userspace processes an interface to activate detection
+	  of buffer over and underflows. This change allows patlooptest to
+	  take advantage of that feature to better inform users of the
+	  cause of pattern errors. Acked-by: Shaun Ruffell
+	  <sruffell at digium.com> (original patch by Matt Fredrickson)
+
+2011-03-16 14:32 +0000 [r9830-9831]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/astribank_is_starting.c: astribank_is_starting.c: do have
+	  timeout (typo) Due to a typo the option for not using a timeout
+	  was always used. Regression since r9426.
+
+	* dahdi.init: dahdi.init: LSB short description
+
+2011-03-10 18:48 +0000 [r9825]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/xtalk/xtalk.c (added), xpp/astribank_hexload.8, xpp/mpptalk.c
+	  (added), xpp/xtalk/xusb.h (added), xpp/xtalk/debug.c (added),
+	  xpp/xpp_fxloader, xpp/xtalk/xtalk.h (added),
+	  xpp/astribank_tool.c, xpp/xtalk/xtalk_defs.h (added),
+	  xpp/astribank_allow.c, xpp/mpptalk.h (added), xpp/mpptalk_defs.h
+	  (added), xpp/xtalk/debug.h (added), xpp/astribank_hexload.c,
+	  xpp/xtalk/xlist.c (added), xpp/debug.c (removed),
+	  xpp/astribank_usb.c, xpp/mpp_funcs.c (removed), xpp/debug.h
+	  (removed), xpp/xtalk/xlist.h (added), xpp/Makefile,
+	  xpp/astribank_usb.h, xpp/mpp_funcs.h (removed),
+	  xpp/astribank_tool.8, xpp/astribank_allow.8, xpp/mpp.h,
+	  xpp/pic_loader.c, xpp/xtalk (added), xpp/xtalk/xusb.c (added):
+	  xpp: use 'xtalk' for the USB access code * Move most of the USB
+	  access code from xpp/ to xpp/xtalk/ . * astribank_tool and such
+	  tools can now use a shorter -D mmm/nnn rather than a full path.
+	  Signed-off-by: Oron Peled <oron.peled at xorcom.com> Acked-by:
+	  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+2011-03-03 Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.4.1 released.
+
+2011-02-08 14:42 +0000 [r9733-9744]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* /, xpp/perl_modules/Dahdi/Chans.pm,
+	  xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi-perl: more
+	  left-over $span->xpd Replace the remaining $span->xpd with
+	  xpd_of_span(). Following up on r9648. Merged revisions 9731 via
+	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: fix xpp
+	  driver in dahdi_hardware Don't require 'dahdi_hardware -v' to
+	  show the driver for a USB device. Only works when the usbfs is
+	  not used (when /proc/bus/usb is not mounted). Signed-off-by:
+	  Tzafrir Cohen <tzafrir.cohen at xorcom.com> Merged revisions 9699
+	  via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* /, xpp/perl_modules/Dahdi/Span.pm: dahdi-perl: left-over
+	  $span->xpd Replace one remaining $span->{XPD} with xpd_of_span().
+	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen at xorcom.com> Merged
+	  revisions 9648 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* /, xpp/perl_modules/Dahdi/Config/Gen/System.pm: dahdi_genconf:
+	  Don't generate configurations that use channel 16 on E1 CAS
+	  Attempting to use channel 16 on E1 CAS is disallowed since that
+	  channel is reserved for RBS signaling. Configurations should not
+	  be generated that attempt to use it. Closes DAHDI-763. Patch by
+	  dmartinez. Merged revisions 9485 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* /, xpp/xpp_fxloader: xpp_fxloader: Don't try to load FPGA
+	  firmware twice When called from udev to load the FPGA firmware,
+	  make sure that this is not the event generated for the first
+	  end-point of the existing two, as we need to talk with the second
+	  one. This is probably better done in the udev rules, but will be
+	  slightly more complicated to apply only to the FPGA loading and
+	  not to USB firmware loading. Merged revisions 9482 via svnmerge
+	  from http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* dahdi_scan.c, /: dahdi_scan: Show CAS framing on the framing
+	  line. Also, always append "/CRC4" on any span where that was
+	  specified as an option. Signed-off-by: Shaun Ruffell
+	  <sruffell at digium.com> Acked-by: Kinsey Moore <kmoore at digium.com>
+	  Merged revisions 9473 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* dahdi_scan.c, /: Fixed up the loss of crc4-multiframe alignment
+	  logic Loss of crc4-multiframe alignment on an E1 link is not a
+	  condition which brings the span down. The span will continue to
+	  run as long as it can maintain double frame alignment. Because of
+	  this, we cannot place the LMFA alarm in the usual spaninfo.alarms
+	  member, due to userspace programs using this as a catch-all for a
+	  span being up or down. We can detect the alarm by watching the
+	  frame error counter (fecount). If it continuously increments, the
+	  span is configured for crc4, and the span remains OK (alarms =
+	  0), then we are in loss of crc4-multiframe state. In order to
+	  test this alarm, you'll need to synthesize a loss of crc4
+	  alignment on the span. You can usually do this by configuring the
+	  local span to use crc4 and the remote end to not use crc4. I used
+	  the Fireberd 6000 in my lab to do this. dahdi-743 & dahdi-420
+	  Acked-by: Shaun Ruffell <sruffell at digium.com> Merged revisions
+	  9458 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* xpp/perl_modules/Dahdi/Hardware/PCI.pm, /: Dahdi::Hardware:
+	  Support beroNet BN4S0e PCI Express card Add extra PCI IDs to
+	  support "beroNet BN4S0e PCI Express 4x S0 Karte". Origin:
+	  http://bugs.debian.org/600839 Merged revisions 9452 via svnmerge
+	  from http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* autoconfig.h.in, xpp/astribank_is_starting.c, /, configure,
+	  configure.ac: astribank_is_starting: use semop if no semtimedop
+	  astribank_is_starting should use a timeout for the semaphore, but
+	  if the GNU-specific semtimedop() is not available, we'll just
+	  fall back to using semop with no time out. Not as good, but
+	  better than nothing. (closes issue #16783) Reported by: abelbeck
+	  Merged revisions 9426 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* /, zonedata.c: tonezone: Add Macao,China to tone zone data Adding
+	  Macao tone zone data according to
+	  http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf (closes
+	  issue #17744) Reported by: alfredtang Patches: zonedata.patch
+	  uploaded by alfredtang (license 1094) Merged revisions 9313 via
+	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
+
+2010-08-31 Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.4.0 released.
+
+2010-08-31 16:12 +0000 [r9220]  Kinsey Moore <kmoore at digium.com>
+
+	* ppp/dahdi.c: PPP: Fix an incorrect function call that was causing
+	  dahdi.so to fail to load
+
+2010-08-18 13:49 +0000 [r9159]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Config/Gen.pm: DAHDI-perl: Config (sort
+	  of) for dynamic channels Generate some sort of configuration for
+	  dynamic channels. Usable enough for testing.
+
+2010-08-18 Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.4.0-rc1 released.
+
+2010-08-13 18:40 +0000 [r9133]  Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi_scan.c: dahdi_scan: Use 'linecompat' to identify digital
+	  spans. This fixes the case where the BRI spans on the Hx8 cards
+	  were displayed as analog spans.
+
+2010-08-03 12:14 +0000 [r9079]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Hardware/PCI.pm,
+	  xpp/perl_modules/Dahdi/Chans.pm: dahdi-perl: also detect Aligera
+	  cards (closes issue #17783) Reported by: frawd Patches:
+	  dahdi-tools_aligera.patch uploaded by frawd (license 610)
+
+2010-08-01 22:39 +0000 [r9076]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* dahdi_scan.c, dahdi_maint.c: fix build of dahdi_scan and
+	  dahdi_maint with -linux 2.3 New functionality that was added in
+	  r8992 and r8993 uses new items defined only in dahdi-linux trunk
+	  (and eventually: 2.4). As in both cases it's a single place to
+	  check, we'll just ifdef it away.
+
+2010-07-30 15:28 +0000 [r9066-9067]  Kinsey Moore <kmoore at digium.com>
+
+	* dahdi_cfg.c: dahdi_cfg: Display more appropriate error messages
+	  when an invalid signaling is chosen along with suggestions on how
+	  to fix the problem.
+
+	* xpp/perl_modules/Dahdi/Chans.pm: perl: make sure the channel
+	  parser recognizes "Reserved" for unusable channels and fix a bug
+	  preventing E&M-E1 from being detected properly
+
+2010-07-28 12:30 +0000 [r9031]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/twinstar: twinstar: err on an invalid command.
+
+2010-07-26 18:56 +0000 [r8991-8994]  Russ Meyerriecks <rmeyerreicks at digium.com>
+
+	* dahdi_scan.c: Removed no longer existing alarm condition
+
+	* dahdi_scan.c: Modified dahdi_sync to report detailed alarms
+
+	* dahdi_maint.c: wip: dahdi_maint can now trip the alarm sim
+
+	* dahdi_maint.c: dahdi_maint: Fixed outdated usage text
+
+2010-07-22 11:41 +0000 [r8964]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/xpp_fxloader: increase maximal firmware delay to 15 seconds
+	  Hmm... how badly congested can the startup of Centos be?
+
+2010-07-21 08:47 +0000 [r8948-8954]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/astribank_hexload.8, xpp/astribank_tool.8,
+	  xpp/astribank_allow.8: More hyphen/minus fixes.
+
+	* xpp/xpp_fxloader: xpp_fxloader: replace a sleep with a sleep loop
+	  For newer kernels there's no need to sleep at all. For Centos5
+	  systems there seems to be a need for a large sleep for firmware
+	  load at boot time. So let's make it a loop.
+
+	* xpp/README.Astribank: README.Astribank: new VMWI settings
+
+2010-07-14 10:58 +0000 [r8923-8924]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Config/Gen.pm: dahdi_genconf: better error
+	  message for a bad generator module
+
+	* xpp/perl_modules/Dahdi/Span.pm, xpp/genconf_parameters: Allow
+	  using CONNECTOR/LABEL in genconf_parameters Allow using
+	  CONNECTOR/LABEL in addition to SPAN and NUM for pri_termtype in
+	  genconf_parameters
+
+2010-07-06 17:52 +0000 [r8854]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Extra PCI IDs for
+	  Junghanns PCI-E card (dahdi-perl)
+
+2010-06-29 15:21 +0000 [r8827]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* dahdi_tool.c: dahdi_tool: center span window as well. If your
+	  window was larger than 80X25, you got a main "window" in the
+	  center and the span one in the corner. This puts the span one in
+	  the center as well.
+
+2010-06-15 15:44 +0000 [r8777]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* dahdi_cfg.c: Convert all '%i' to '%d' in dahdi_cfg Various values
+	  in system.conf were parsed using %i. This means that a value with
+	  a leading 0x was considered hexadecimal and a value with a
+	  leading 0 would be considered octal ('030' == '24' == '0x1E').
+	  This was never documented and seems a potential cause for
+	  confusion in case a leading zero sneaks in. It is thus removed.
+
+2010-06-03 20:56 +0000 [r8746]  Doug Bailey <dbailey at digium.com>
+
+	* patlooptest.c: Add enhanced command line parsing and add more
+	  options into how errors are flagged and what is displayed. Still
+	  runs with the old usage: patlooptest <dahdi device> [<timeout>]
+
+2010-06-02 17:05 +0000 [r8741]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: An extra PCI ID for an
+	  OpenVox card I ran into.
+
+2010-05-20 13:10 +0000 [r8670]  Sean Bright <sean at malleable.com>
+
+	* /, xpp: Add dahdi_maint and xpp/twinstar.8 to svn:ignore
+
+2010-05-17 13:26 +0000 [r8630-8638]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* /, xpp/waitfor_xpds, xpp/astribank_hook: Fix bashism (Raphael
+	  Geissert, checkbashism)
+
+	* xpp/perl_modules/Dahdi/Hardware/USB.pm: A more correct way to
+	  pass parameters
+
+2010-05-09 14:09 +0000 [r8615]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* dahdi_cfg.c: Remove duplicate code: rad_apply_channels
+	  rad_apply_channels() was the same as apply_channels()
+
+2010-05-04 15:33 +0000 [r8606]  Kevin P. Fleming <kpfleming at digium.com>
+
+	* dahdi_cfg.c: Report correct span number in dahdi_cfg verbose
+	  output. When the DAHDI configuration file does not configure
+	  every single span in the system, but leaves spans unconfigured,
+	  the verbose output from dahdi_cfg would show incorrect span
+	  numbers when reporting the line configuration, as it printed the
+	  index into the array of configured spans, instead of their actual
+	  span numbers.
+
+2010-05-03 13:54 +0000 [r8589]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/xpp_fxloader: xpp_fxloader: make sure 1163 is not missed.
+
+2010-04-29 15:06 +0000 [r8580]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/xpp_fxloader: Load xpp firmware in the background (udev) Move
+	  loading the the xpp firmwares (when called from udev) to a
+	  background sub-process. This helps with: * Don't block udev * It
+	  seems that with older systems (e.g. CentOS 5) we need to wait a
+	  bit for the device file to appear (in one of the upcoming udev
+	  events). If we keep blocking udev, we won't have the device file.
+	  The 'sleep' does not seem to be required for newer systems (e.g.
+	  Debian Lenny).
+
+2010-04-22 09:55 +0000 [r8547]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/Makefile: astribank_is_starting does not depend on libusb.
+
+2010-04-18 12:52 +0000 [r8529-8535]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* dahdi.init: Add proper dependencies to the 'stop' action as well.
+
+	* doc/pattest.8, xpp/dahdi_genconf, xpp/astribank_is_starting.8,
+	  doc/dahdi_cfg.8, doc/dahdi_test.8, doc/fxotune.8,
+	  doc/dahdi_diag.8, doc/dahdi_scan.8, doc/patgen.8,
+	  doc/dahdi_monitor.8: man pages: hyphen to minus Groff considers
+	  '-' a hyphen. If we want a minus (or a dash) we need to use '\-'.
+
+2010-04-14 14:55 +0000 [r8520]  Kinsey Moore <kmoore at digium.com>
+
+	* system.conf.sample: Add documentation for e&me1 (E&M over E1
+	  lines).
+
+2010-04-12 Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.3.0 released.
+
+2010-04-12 20:18 +0000 [r8503-8508]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Hardware/USB.pm: Also detect USB devices
+	  connected on a hub.
+
+	* xpp/perl_modules/Dahdi/Span.pm: Also detect type for Sangoma
+	  E1/T1 cards.
+
+2010-04-01 15:45 +0000 [r8451]  Shaun Ruffell <sruffell at digium.com>
+
+	* Makefile: dahdi_maint: install dahdi_maint on 'make install'
+
+2010-03-29 21:04 +0000 [r8444]  Kinsey Moore <kmoore at digium.com>
+
+	* dahdi_maint.c: Add a space between words and correct an error
+	  message.
+
+2010-03-25 15:29 +0000 [r8422-8430]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: wcb4xxp - add Swyx 4xS0
+	  SX2 QuadBri PCI IDs to dahdi-perl (issue #16493) Reported by:
+	  nic_bellamy
+
+	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Some more wcb4xxp PCI IDs
+	  for Junghanns cards (issue #15446) (issue #16447) Reported by:
+	  lpistone Tested by: okrief
+
+2010-03-23 13:41 +0000 Russ Meyerriecks <rmeyerriecks at digium.com>
+
+	* dahdi-tools version 2.2.1.1 released.
+
+2010-03-10 17:37 +0000 Russ Meyerriecks <rmeyerriecks at digium.com>
+
+	* xpp/perl_modules/Dahdi/Hardware/PCI.pm: Added IDs for gen5 firmware
+
+2010-01-11 Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.2.1 released.
+
+2010-01-10 15:39 +0000 [r7793-7829]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* /, xpp/README.Astribank: Another round of updates to
+	  README.Astribank. zap->dahdi and others Merged revisions 7754 via
+	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* xpp/perl_modules/Dahdi/Hardware/USB.pm, /: dahdi-perl: only get
+	  'serial' and 'devnum' attributes from Astribanks We can tell if a
+	  device is an Astribank by the vendorId and productId attribute.
+	  Get other attributed only after we give up on other devices.
+	  (closes issue #16552) Merged revisions 7558 via svnmerge from
+	  https://origsvn.digium.com/svn/dahdi/tools/trunk
+
+	* /, xpp/xpp_fxloader: xpp_fxloader: adapt to newer kernels This
+	  commit prepares xpp_fxloader to get hotplug envirnment from newer
+	  kernel versions: * DEVICE will eventually be replaced with
+	  DEVNAME. Accept both (and look at DEVNAME first). * If we get
+	  DEVICE, we'll probably get an invalid path based at /proc/bus/usb
+	  . Fix it to use /dev/bus/usb . * While we're at it, allow using
+	  PRODUCT from the envirnment instead of from the command-line.
+	  This should allow fixing udev rules but will also work with
+	  existing rules in DAHDI-linux from trunk (for systems where they
+	  are valid). Merged revisions 7752 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* /, xpp/waitfor_xpds, xpp/twinstar_hook, xpp/xpp_fxloader: xpp:
+	  Comment-only changes: copyright, keywords Merged revisions 7463
+	  via svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
+
+	* /, xpp/twinstar: Add perldoc for twinstar. This also avoids a
+	  bogus, empty twinstar.8 man page. Merged revisions 7219,7263 via
+	  svnmerge from http://svn.digium.com/svn/dahdi/tools/trunk
+	  ........ r7219 | tzafrir | 2009-09-27 13:49:40 +0200 (Sun, 27 Sep
+	  2009) | 5 lines xpp: install twinstar by default; Add a man page
+	  Add a man page to twinstar (as perl POD) and get it installed by
+	  default. ........ r7263 | tzafrir | 2009-09-29 22:45:50 +0200
+	  (Tue, 29 Sep 2009) | 2 lines xpp: fix a typo in documentation
+	  ........
+
+	* README, /: Fix README for asciidoc 8.5.2 Tweak title a bit to
+	  avoid asciidoc consider it a header for a syntax block. Merged
+	  revisions 7792 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+2009-12-15 Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.2.1-rc2 released.
+
+2009-12-01 13:14 +0000 [r7655]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/Makefile: Also install the twinstar tool on the system
+	  Originaly part of trunk r7219.
+
+2009-11-22 11:48 +0000 [r7621]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/astribank_hexload.c, xpp/perl_modules/Dahdi/Hardware/USB.pm,
+	  xpp/mpp_funcs.c, xpp/astribank_tool.c, xpp/astribank_usb.h,
+	  xpp/mpp_funcs.h, xpp/astribank_tool.8,
+	  xpp/perl_modules/Dahdi/Xpp/Mpp.pm, xpp/mpp.h: xpp: MPP protocol
+	  v.1.4 * New firmware loading protocol - Older one (1.3) is still
+	  supported for now * Support loading firmwares from Astribanks
+	  with a minimal firmware (1163) * astribank_tool -Q: always query,
+	  regardless of verbosity level xpp rev: up to 7559 Merged
+	  revisions 7609 via svnmerge from
+	  https://origsvn.digium.com/svn/dahdi/tools/trunk
+
+2009-11-19 23:11 +0000 [r7611]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/xpp_fxloader, xpp/astribank_tool.c: xpp: support loading
+	  USB firmware into 1163 devices as well Demote some messages to
+	  debug while we're at it. Merged revisions 7596 via svnmerge from
+	  http://svn.digium.com/svn/dahdi/tools/trunk
+
+2009-11-05 09:41 +0000 [r7466-7492]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/xpp_sync, xpp/perl_modules/Dahdi/Xpp/Xpd.pm: Use the
+	  timing_priority attribute, if available, to provide more corrent
+	  LED indiction and such. 
+
+	* xpp: use xpd sysfs attr. timing_priority to set NT/TE 
+
+	* dahdi.init, xpp/astribank_is_starting.c (added), 
+	  xpp/waitfor_xpds, xpp/astribank_is_starting.8 (added),
+	  xpp/twinstar_hook, xpp/xpp_fxloader, xpp/Makefile,
+	  xpp/astribank_hook, init.conf.sample: Add optional "hotplug mode"
+	  to init scripts The hotplug mode is only used in
+	  XPP_HOTPLUG_DAHDI=yes is set in /etc/dahdi/init.conf . If it is
+	  set and the system actually has Astribanks, most of the init
+	  script will actually be run from the context of a udev event.
+
+	* xpp: Add astribank_is_starting: astribank_is_running is used to
+	  tell when we may have an Astribank that is initializing (and may
+	  be re-enumerating and thus not listed as a device). It uses a
+	  semaphore as we can always write to one and we can't always write
+	  to a file. xpp: A man page for astribank_is_starting xpp rev: 7321 
+
+	* dahdi.init: move module loading to a separate function Move the
+	  module loading parts of the dahdi init script to a seperate
+	  function - load_modules. To be used by a later commit. There is
+	  not functional change here (but the diff is confusing). 
+
+	* Add XPP_HOTPLUG_DAHDI mode: cfg initiated mostly from hotplug If
+	  XPP_HOTPLUG_DAHDI=yes is set in /etc/dahdi/init.conf (which is
+	  not the default), the normal run of the 'start' operation of the
+	  dahdi init script will only be responsible for loading modules.
+	  The rest will be done (if there are indeed Astribanks on the
+	  system) by a second call to the init script once all of them have
+	  connected. The astribank_hook has also been mostly rewritten.
+	  Most of the functionality of twinstar_hook moved to it. The
+	  current twinstar_hook is a simple example script.
+	  XPP_HOTPLUG_DAHDI mode assumes that all Astribanks on the system
+	  are listed in /etc/dahdi/xpp_order (which can be generated using,
+	  e.g. 'dahdi_genconf xpporder') 
+
+	* Fix XPP_HOTPLUG_DAHDI: logic; end of init.d script 'Hotplug mode'
+	  was introduced in r7335. * The logic in the script was broken. -
+	  Negative logic is not such a grand idea to start with. *
+	  Interactive invocation of init.d ends when expected and not
+	  sooner. This change makes waitfor_xpds wait longer. Rather than
+	  waiting for all the Astribanks to load, it will now wait until
+	  the initialization of dahdi from the Astribanks hook script is
+	  run. This allows running e.g.: /etc/init.d/dahdi start;
+	  /etc/init.d/asterisk start It also means that
+	  'astribank_is_starting' is actually used as a semaphore and not
+	  only as stamp file. As before, those changes have no effect if
+	  hotplug mode is not explicitly enabled (setting
+	  'XPP_HOTPLUG_DAHDI=yes' in init.conf). 
+
+	* xpp: make astribank_is_starting build without warnings.
+	  autoconfig.h is needed as semtimedop() requires _GNU_SOURCE. xpp
+	  rev: 7471
+
+	* xpp/perl_modules/Dahdi/Config/Params.pm,
+	  xpp/perl_modules/Dahdi/Config/Gen.pm,
+	  xpp/perl_modules/Dahdi/Config/Gen/Chandahdi.pm,
+	  xpp/perl_modules/Dahdi/Config/Gen/System.pm,
+	  xpp/genconf_parameters: CAS DAHD/Asterisk configuration
+	  generation support Also support generating (open)R2 config in
+	  chan_dahdi.conf, while we're at it. Default configuration remains
+	  ISDN as before if no extra settings are given in
+	  genconf_parameters. 
+	  
+
+	* dahdi-perl: chan_dahdi.conf generator can generate openr2 conf If
+	  configured to use R2 ("pri_connection_type R2" in
+	  genconf_parameters), the chandahdi generator of dahdi_genconf
+	  will now generate configuration for the openr2 support in
+	  chan_dahdi. 
+
+	* xpp: Dahdi::Config::Gen.pm: improvements in preperation for
+	  T1-CAS: - New channo_range() method which returns range strings
+	  for any list of channel numbers (handle sorting, validation,
+	  etc.) - Reimplement bchan_range() as a small wrapper around
+	  channo_range(). - Another small wrapper is chan_range() that
+	  works on channel objects. - Also a parse_chan_range() does the
+	  reverse (from range string to a list of channel numbers). This
+	  isn't used at the moment. xpp rev: 7306 
+
+	* dahdi-perl: Add basic T1-CAS support for dahdi_genconf - Support
+	  added in generators of system.conf and of chan_dahdi.conf . -
+	  Some strange asumptions about being FXS/FXO depending on being
+	  timing provider/supplier. - New gen_cas() method for Chandahdi
+	  and System. - Now gen_digital() is a bit cleaner. - Call
+	  gen_cas(), gen_openr2(), gen_digital() according to the
+	  'pri_connection_type' config (CAS, R2, PRI/BRI). xpp rev: 7307
+	  
+
+	* dahdi_perl: improved config generation for T1 CAS A few extra
+	  options for a CAS span signalling. xpp rev: 7343, 7346, 7369 
+
+	* xpp: reduce the clutter of firmware loading Make the new XPP
+	  tools much less verbose: * demote messages to be debug * Convert
+	  multi-line messages to be single-line messages Making
+	  xpp_fxloader run in debug mode can be done by setting DEBUG=yes
+	  in /etc/dahdi/init.conf. 
+
+	* dahdi-perl fixes, mostly xpp-specific. * Fix pattern for PCI BRI
+	  cards * Fix recognizing xpp devices by @connector in xpp_order *
+	  Print more helpful comments in xpp_order * Remove most (if not
+	  all) need of /proc/bus/usb * Handle other similar "is_twinstar"
+	  errors.
+
+	* dahdi_genconf: xpp_order generator: Extra '#' after connector
+	  comment Add an extra '#' right after the connector string to make
+	  it simpler to use the connector string from the generated
+	  xpp_order. xpp rev: 7292 
+
+	* xpp: make /proc/bus/usb/devices optional Get the information we
+	  read from /proc/bus/usb/devices from /sys/bus/usb/devices .
+	  Tested on my Debian Unstable with 2.6.30 kernel. The default is
+	  still /proc/bus/usb and sysfs is only used if the procfs file is
+	  not found. Also fixes a case of using the sysfs attribute busnum,
+	  that does not exist in kernel 2.6.9 . Devise the bus number from
+	  the name of the node. 
+
+	* dahdi-perl: Avoid '"is_twinstar" on unblessed reference' Dpn't
+	  panic if a device is not found in the list of hardware. This is
+	  not only indication of a bug, but can also happen if a device
+	  appeared after the script was started. 
+
+	* zonedata.c: zonedata: Add tone definitions for Panama. (closes
+	  issue #14832) Reported by: jlduran Patch by: jldruan
+
+	* Pass correct channel number to DAHDI_GET_PARAMS when passing span
+	  numbers to dahdi_scan. When filtering, we weren't taking into
+	  account the number of channels in the spans that we were
+	  skipping. (closes issue #15553) Reported by: tony Patches:
+	  20090723_issue15553.patch uploaded by seanbright (license 71)
+	  Tested by: seanbright 
+
+	* xpp: cleanup gcc warnings and one real astribank_tool bug xpp
+	  rev: 7281 
+
+	* Add a missing trailing slash on the install-libs target (closes
+	  issue #15793) Reported by: pprindeville Patches:
+	  dahdi-tools-makefile.patch uploaded by pprindeville (license 347) 
+
+	* dahdi_genconf: Add the TC400P transcoder card to our hardware
+	  list (seanbright) 
+
+2009-06-08 17:02 +0000 [r6677-6678]  Sean Bright <sean.bright at gmail.com>
+
+	* dahdi-tools version 2.2.0 released.
+
+	* Makefile: Since this 'echo' is part of a larger statement, we
+	  don't need the @ symbol. Cleans up an error I am seeing on
+	  Ubuntu.
+
+	* Makefile: Get rid of parallel build warnings from GNU make.
+
+2009-05-28 14:04 +0000 [r6668]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/waitfor_xpds: xpp: if $dahdi_hardware is empty, don't use it
+	  in an error message
+
+2009-05-27 Shaun Ruffell <sruffell at digium.com>
+
+	* dahdi-tools version 2.2.0-rc3 released.
+
+2009-05-26 09:55 +0000 [r6655-6657]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* Makefile: Reword the message after 'make config' for the case no
+	  hardware found Check the output of dahdi_hardware and give a
+	  different message for the case it found no hardware. (closes
+	  issue #14792) Reported by: Dovid Patches:
+	  dahdi_hardware_nodev_make.diff uploaded by tzafrir (license 46)
+
+	* xpp/waitfor_xpds: Properly fix usage of waitfor_xpds in
+	  non-standard settings. From xpp rev. 7137.
+
+2009-05-19 16:46 +0000 [r6643-6647]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Config/Params.pm, xpp/dahdi_genconf,
+	  xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm,
+	  xpp/perl_modules/Dahdi/Config/Gen/System.pm,
+	  xpp/perl_modules/Dahdi/Xpp/Xpd.pm, xpp/genconf_parameters:
+	  dahdi-perl: make dahdi_genconf default to hardhdlc
+	  dahdi_genconf's 'bri_hardhdlc' parameter changes. Should
+	  generally work with no need for manual configuration unless you
+	  use a bristuffed driver (zaphfc, qozap). See notes in
+	  genconf_parameters.
+
+	* xpp/waitfor_xpds, dahdi.init: dahdi.init: moved test for
+	  astribanks into waitfor_xpds If the system starts with an
+	  Astribank with no firmware, the firmware loading may take a while
+	  and the Astribank only becomes ready some time after the DAHDI
+	  init script starts. This means that the test at the beginning of
+	  xpp_startup() in dahdi.init fails to find an Astribank, and the
+	  init script simply continues ignoring this. This changeset moves
+	  the testing inside the script waitfor_xpds. The script now: 1.
+	  Tests for an Astribank using dahdi_hardware and exists
+	  immediately if none found. 2. A loop (of maximum 10 seconds)
+	  waits for the first Astribank to be detected by the driver. 3.
+	  Waiting for the initialization of all the Astribanks to complete
+	  (The original waitfor_xpds) The support for the old procfs
+	  iinterface has been removed, as it has never been used with
+	  DAHDI.
+
+	* xpp/Makefile, xpp/astribank_tool.8, xpp/astribank_allow.8
+	  (added): xpp: install astribank_allow As we install it, we need a
+	  matching man page.
+
+2009-05-17 12:01 +0000 [r6630-6632]  Tzafrir Cohen <tzafrir.cohen at xorcom.com>
+
+	* xpp/perl_modules/Dahdi/Config/Gen/Users.pm: A closer-to-reality
+	  users.conf generation module
+

[... 870 lines stripped ...]



More information about the svn-commits mailing list