[svn-commits] sruffell: linux/trunk r10016 - /linux/trunk/drivers/dahdi/wct4xxp/base.c
SVN commits to the Digium repositories
svn-commits at lists.digium.com
Fri Jul 1 10:45:18 CDT 2011
Author: sruffell
Date: Fri Jul 1 10:45:14 2011
New Revision: 10016
URL: http://svnview.digium.com/svn/dahdi?view=rev&rev=10016
Log:
wct4xxp: Add module parameter to ignore rotary switch settings.
The dual and quad span cards have a rotary switch onboard which controls
the order that cards serviced by this driver are registered with the
core of DAHDI. This commit adds a module parameter 'ignore_rotary'
which, when set to 1, causes the driver to ignore the position of the
rotary switch and only consider the physical slot when registering with
DAHDI.
Ignoring the rotary switch settings also permits the PCI device to be
bound and unbound from the driver at runtime since registration with
DAHDI no longer only happens when the module is first initialized.
By default, the rotary switch will still be used to determine
registration order. This commit does not change the default behavior.
Signed-off-by: Shaun Ruffell <sruffell at digium.com>
Modified:
linux/trunk/drivers/dahdi/wct4xxp/base.c
Modified: linux/trunk/drivers/dahdi/wct4xxp/base.c
URL: http://svnview.digium.com/svn/dahdi/linux/trunk/drivers/dahdi/wct4xxp/base.c?view=diff&rev=10016&r1=10015&r2=10016
==============================================================================
--- linux/trunk/drivers/dahdi/wct4xxp/base.c (original)
+++ linux/trunk/drivers/dahdi/wct4xxp/base.c Fri Jul 1 10:45:14 2011
@@ -213,6 +213,7 @@
static int latency = 1;
static int ms_per_irq = 1;
+static int ignore_rotary;
#ifdef FANCY_ALARM
static int altab[] = {
@@ -2119,7 +2120,7 @@
snprintf(ts->span.desc, sizeof(ts->span.desc) - 1,
"T%dXXP (PCI) Card %d Span %d", wc->numspans, wc->num, x+1);
ts->span.manufacturer = "Digium";
- if (order_index[wc->order] == 1)
+ if (!ignore_rotary && (1 == order_index[wc->order]))
snprintf(ts->span.location, sizeof(ts->span.location) - 1, "Board ID Switch %d", wc->order);
else
snprintf(ts->span.location, sizeof(ts->span.location) - 1,
@@ -4641,8 +4642,36 @@
kfree(wc);
}
+/**
+ * wct4xxp_sort_cards - Sort the cards in card array by rotary switch settings.
+ *
+ */
+static void wct4xxp_sort_cards(void)
+{
+ int x;
+
+ /* get the current number of probed cards and run a slice of a tail
+ * insertion sort */
+ for (x = 0; x < MAX_T4_CARDS; x++) {
+ if (!cards[x+1])
+ break;
+ }
+ for ( ; x > 0; x--) {
+ if (cards[x]->order < cards[x-1]->order) {
+ struct t4 *tmp = cards[x];
+ cards[x] = cards[x-1];
+ cards[x-1] = tmp;
+ } else {
+ /* if we're not moving it, we won't move any more
+ * since all cards are sorted on addition */
+ break;
+ }
+ }
+}
+
static int __devinit t4_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ int res;
struct t4 *wc;
struct devtype *dt;
unsigned int x, f;
@@ -4806,23 +4835,9 @@
}
init_spans(wc);
- /* get the current number of probed cards and run a slice of a tail
- * insertion sort */
- for (x = 0; x < MAX_T4_CARDS; x++) {
- if (!cards[x+1])
- break;
- }
- for ( ; x > 0; x--) {
- if (cards[x]->order < cards[x-1]->order) {
- struct t4 *tmp = cards[x];
- cards[x] = cards[x-1];
- cards[x-1] = tmp;
- } else {
- /* if we're not moving it, we won't move any more
- * since all cards are sorted on addition */
- break;
- }
- }
+
+ if (!ignore_rotary)
+ wct4xxp_sort_cards();
dev_info(&wc->dev->dev, "Found a Wildcard: %s\n", wc->variety);
wc->gpio = 0x00000000;
@@ -4858,7 +4873,11 @@
}
#endif
- return 0;
+ res = 0;
+ if (ignore_rotary)
+ res = t4_launch(wc);
+
+ return res;
}
static int t4_hardware_stop(struct t4 *wc)
@@ -5015,20 +5034,25 @@
printk(KERN_NOTICE "wct4xxp: Ident of first card is not zero (%d)\n",
cards[0]->order);
}
- for (i = 0; cards[i]; i++) {
- /* warn the user of duplicate ident values it is probably
- * unintended */
- if (debug && res < 15 && cards[i+1] &&
- cards[res]->order == cards[i+1]->order) {
- printk(KERN_NOTICE "wct4xxp: Duplicate ident value found (%d)\n",
- cards[i]->order);
- }
- res = t4_launch(cards[i]);
- if (res) {
- int j;
- for (j = 0; j < i; ++j)
- _t4_remove_one(cards[j]);
- break;
+
+ /* If we're ignoring the rotary switch settings, then we've already
+ * registered in the context of .probe */
+ if (!ignore_rotary) {
+ for (i = 0; cards[i]; i++) {
+ /* warn the user of duplicate ident values it is
+ * probably unintended */
+ if (debug && res < 15 && cards[i+1] &&
+ cards[res]->order == cards[i+1]->order) {
+ printk(KERN_NOTICE "wct4xxp: Duplicate ident "
+ "value found (%d)\n", cards[i]->order);
+ }
+ res = t4_launch(cards[i]);
+ if (res) {
+ int j;
+ for (j = 0; j < i; ++j)
+ _t4_remove_one(cards[j]);
+ break;
+ }
}
}
return res;
@@ -5059,6 +5083,10 @@
module_param(sigmode, int, 0600);
module_param(latency, int, 0600);
module_param(ms_per_irq, int, 0600);
+module_param(ignore_rotary, int, 0400);
+MODULE_PARM_DESC(ignore_rotary, "Set to > 0 to ignore the rotary switch when " \
+ "registering with DAHDI.");
+
#ifdef VPM_SUPPORT
module_param(vpmsupport, int, 0600);
module_param(vpmdtmfsupport, int, 0600);
More information about the svn-commits
mailing list