[svn-commits] kpfleming: trunk r221592 - in /trunk: configs/udptl.conf.sample main/udptl.c

[SVN commits to the Digium repositories]

Author: kpfleming
Date: Thu Oct  1 11:16:09 2009
New Revision: 221592

URL: http://svnview.digium.com/svn/asterisk?view=rev&rev=221592
Log:
Remove ability to control T.38 FAX error correction from udptl.conf.

chan_sip has had the ability to control T.38 FAX error correction mode on a per-peer
(or global) basis for a couple of releases now, which is where it should have been
all along. This patch removes the ability to configure it in udptl.conf, but issues
a warning if the user tries to do, telling them to look at sip.conf.sample for how
to configure it now. For any SIP peers that are T.38 enabled in sip.conf, there is
already a default for FEC error correction even if the user does not specify any mode,
so this change will not turn off error correction by default, it will have the same
default value that has been in the udptl.conf sample file.


Modified:
    trunk/configs/udptl.conf.sample
    trunk/main/udptl.c

Modified: trunk/configs/udptl.conf.sample
URL: http://svnview.digium.com/svn/asterisk/trunk/configs/udptl.conf.sample?view=diff&rev=221592&r1=221591&r2=221592
==============================================================================
--- trunk/configs/udptl.conf.sample (original)
+++ trunk/configs/udptl.conf.sample Thu Oct  1 11:16:09 2009
@@ -11,11 +11,6 @@
 ; Whether to enable or disable UDP checksums on UDPTL traffic
 ;
 ;udptlchecksums=no
-;
-; The error correction type to be sent
-;
-T38FaxUdpEC = t38UDPFEC
-;T38FaxUdpEC = t38UDPRedundancy
 ;
 ; The maximum length of a UDPTL packet
 ;

Modified: trunk/main/udptl.c
URL: http://svnview.digium.com/svn/asterisk/trunk/main/udptl.c?view=diff&rev=221592&r1=221591&r2=221592
==============================================================================
--- trunk/main/udptl.c (original)
+++ trunk/main/udptl.c Thu Oct  1 11:16:09 2009
@@ -81,7 +81,6 @@
 #ifdef SO_NO_CHECK
 static int nochecksums;
 #endif
-static enum ast_t38_ec_modes udptlfectype;
 static int udptlfecentries;
 static int udptlfecspan;
 static int udptlmaxdatagram;
@@ -866,7 +865,6 @@
 	if (!(udptl = ast_calloc(1, sizeof(*udptl))))
 		return NULL;
 
-	udptl->error_correction_scheme = udptlfectype;
 	udptl->error_correction_span = udptlfecspan;
 	udptl->error_correction_entries = udptlfecentries;
 	
@@ -1267,7 +1265,6 @@
 
 	udptlstart = 4500;
 	udptlend = 4999;
-	udptlfectype = UDPTL_ERROR_CORRECTION_NONE;
 	udptlfecentries = 0;
 	udptlfecspan = 0;
 	udptlmaxdatagram = 0;
@@ -1308,10 +1305,7 @@
 #endif
 		}
 		if ((s = ast_variable_retrieve(cfg, "general", "T38FaxUdpEC"))) {
-			if (strcmp(s, "t38UDPFEC") == 0)
-				udptlfectype = UDPTL_ERROR_CORRECTION_FEC;
-			else if (strcmp(s, "t38UDPRedundancy") == 0)
-				udptlfectype = UDPTL_ERROR_CORRECTION_REDUNDANCY;
+			ast_log(LOG_WARNING, "T38FaxUdpEC in udptl.conf is no longer supported; use the t38pt_udptl configuration option in sip.conf instead.\n");
 		}
 		if ((s = ast_variable_retrieve(cfg, "general", "T38FaxMaxDatagram"))) {
 			udptlmaxdatagram = atoi(s);