[svn-commits] tzafrir: tools/trunk r6630 - in /tools/trunk/xpp: ./ perl_modules/Dahdi/Confi...

Sat May 16 17:47:00 CDT 2009

Author: tzafrir
Date: Sat May 16 17:46:57 2009
New Revision: 6630

URL: http://svn.asterisk.org/svn-view/dahdi?view=rev&rev=6630
Log:
Fix typos in xpp documentation

Modified:
    tools/trunk/xpp/genconf_parameters
    tools/trunk/xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm
    tools/trunk/xpp/perl_modules/Dahdi/Xpp/Mpp.pm

Modified: tools/trunk/xpp/genconf_parameters
URL: http://svn.asterisk.org/svn-view/dahdi/tools/trunk/xpp/genconf_parameters?view=diff&rev=6630&r1=6629&r2=6630
==============================================================================

--- tools/trunk/xpp/genconf_parameters (original)
+++ tools/trunk/xpp/genconf_parameters Sat May 16 17:46:57 2009
@@ -2,18 +2,18 @@
 # /etc/dahdi/genconf_parameters
 #
 # This file contains parameters that affect the
-# dahdi_genconf configurator generator.
+# dahdi_genconf configuration generator.
 #
 # Syntax:
 # 	* A comment from '#' to end of line
 # 	* Blank lines ignored
 # 	* Whitespace at end of line trimmed
 # 	* Single valued items:
-# 	     key <whitespaces...> value
+# 	     key <whitespace...> value
 # 	* List valued items:
 # 	     key
-# 	     <whitespaces...>value1
-# 	     <whitespaces...>value2
+# 	     <whitespace...>value1
+# 	     <whitespace...>value2
 # 	     ...
 #
 
@@ -21,27 +21,27 @@
 # extension number will be channel_number+base_exten . The default is:
 #base_exten		4000
 #
-# Make FXS (analog phones) extentions answer immediately (sets
+# Make FXS (analog phones) extensions answer immediately (sets
 # 'immediate = yes' for them in chan_dahdi.conf). Don't enable this before 
 # you're read documentation about this option.
 #fxs_immediate		yes
 #
 # For FXS (analog phones) - use KS or LS? ks is the only method for
 # Asterisk to provide disconnect supervision and thus it would normally
-# be preffered and is the default.
+# be preferred and is the default.
 #fxs_default_start	ls
 #
 # For FXO (analog lines) - use KS or LS? KS is the default and is
-# normally the better choice as it allows detecting handups on many
+# normally the better choice as it allows detecting hang-ups on many
 # lines.
 #fxo_default_start	ls
 
-# Set tone zone values. This is used for playing tones (busy, dialtone
+# Set tone zone values. This is used for playing tones (busy, dial-tone
 # and such). The default is 'us'. This sets the value for both loadzone
 # and defaultzone in system.conf .
 #lc_country		il
 
-# The dialplan contenxt into which to send trunks in chan_dahdi.conf or
+# The dialplan context into which to send trunks in chan_dahdi.conf or
 # users.conf. The default value is:
 #context_lines		from-pstn
 #
@@ -49,7 +49,7 @@
 # users.conf. The default value is:
 #context_phones		from-internal
 #
-# Two extea contexts for the input ports and output ports of an
+# Two extra contexts for the input ports and output ports of an
 # Astribank. Default values are:
 #context_input		astbank-input
 #context_output		astbank-output
@@ -78,16 +78,16 @@
 # phones.
 #brint_overlap
 
-# The echo canceller to use. If you have a hardware echo canceller, just 
+# The echo canceler to use. If you have a hardware echo canceler, just 
 # leave it be, as this one won't be used anyway.
 #
 # The default is mg2, but it may change in the future. E.g: a packager
-# that bundles a better echo canceller may set it as the default, or
-# dahdi_genconf will scan for the "best" echo canceller.
+# that bundles a better echo canceler may set it as the default, or
+# dahdi_genconf will scan for the "best" echo canceler.
 #
 #echo_can		hpec
 #echo_can		oslec
-#echo_can		none  # to aboid echo cancellers altogether
+#echo_can		none  # to avoid echo canceler altogether
 
 # bri_hardhdlc: If this parameter is set to 'yes', in the entries for
 # BRI cards 'hardhdlc' will be used instead of 'dchan' (an alias for

Modified: tools/trunk/xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm
URL: http://svn.asterisk.org/svn-view/dahdi/tools/trunk/xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm?view=diff&rev=6630&r1=6629&r2=6630
==============================================================================
--- tools/trunk/xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm (original)
+++ tools/trunk/xpp/perl_modules/Dahdi/Config/Gen/Xpporder.pm Sat May 16 17:46:57 2009
@@ -89,7 +89,7 @@
 # Dahdi registration.
 #
 # It is read from /etc/dahdi/xpp_order. This location
-# may be overriden via the environment variable XPPORDER_CONF
+# may be overridden via the environment variable XPPORDER_CONF
 #
 # Lines may contain:
 #   - The Astribank label (verbatim)
@@ -97,13 +97,13 @@
 # Ordering number of each listed Astribank is determined
 # by its position in this file.
 # Astribanks not listed in this file, get an ordering
-# number of 999 (last).
+# number of 99 (last).
 #
 # Astribanks with same ordering number are sorted by their
-# connectors (to preserve legacy behaviour).
+# connectors (to preserve legacy behavior).
 #
 # Examples:
-#usb:TWS-08
+#usb:1234
 #@usb-0000:06:02.2-2
 HEAD
 	foreach my $xbus (@xbuses) {

Modified: tools/trunk/xpp/perl_modules/Dahdi/Xpp/Mpp.pm
URL: http://svn.asterisk.org/svn-view/dahdi/tools/trunk/xpp/perl_modules/Dahdi/Xpp/Mpp.pm?view=diff&rev=6630&r1=6629&r2=6630
==============================================================================
--- tools/trunk/xpp/perl_modules/Dahdi/Xpp/Mpp.pm (original)
+++ tools/trunk/xpp/perl_modules/Dahdi/Xpp/Mpp.pm Sat May 16 17:46:57 2009
@@ -21,7 +21,7 @@
 =head1 DESCRIPTION
 
 This package uses C<astribank_tool(8)> to collect information
-about Astribanks via MPP (Managment Processor Protocol).
+about Astribanks via MPP (Management Processor Protocol).
 
 The binary default location is F</usr/sbin/astribank_tool>. It may be
 overridden via module parameter C<astribank_tool=> and the


