[svn-commits] seanbright: branch 1.6.2 r202842 - in /branches/1.6.2: ./ doc/tex/
SVN commits to the Digium repositories
svn-commits at lists.digium.com
Tue Jun 23 18:58:29 CDT 2009
Author: seanbright
Date: Tue Jun 23 18:58:26 2009
New Revision: 202842
URL: http://svn.asterisk.org/svn-view/asterisk?view=rev&rev=202842
Log:
Merged revisions 202840-202841 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r202840 | seanbright | 2009-06-23 19:53:45 -0400 (Tue, 23 Jun 2009) | 1 line
Remove some trailing whitespace before making content changes.
........
r202841 | seanbright | 2009-06-23 19:57:07 -0400 (Tue, 23 Jun 2009) | 1 line
Change some section names in the CDR tex documentation.
........
Modified:
branches/1.6.2/ (props changed)
branches/1.6.2/doc/tex/billing.tex
branches/1.6.2/doc/tex/cdrdriver.tex
Propchange: branches/1.6.2/
------------------------------------------------------------------------------
Binary property 'trunk-merged' - no diff available.
Modified: branches/1.6.2/doc/tex/billing.tex
URL: http://svn.asterisk.org/svn-view/asterisk/branches/1.6.2/doc/tex/billing.tex?view=diff&rev=202842&r1=202841&r2=202842
==============================================================================
--- branches/1.6.2/doc/tex/billing.tex (original)
+++ branches/1.6.2/doc/tex/billing.tex Tue Jun 23 18:58:26 2009
@@ -15,7 +15,7 @@
You can set default account codes and AMA flags for devices in
channel configuration files, like sip.conf, iax.conf etc.
-\section{Fields of the CDR in Asterisk}
+\section{CDR Fields}
\begin{itemize}
\item accountcode: What account number to use, (string, 20 characters)
@@ -53,11 +53,11 @@
(although this can result in a media latency increase since the media packets
have to traverse the middle server(s) in the call).
-\section{CDR Variables}
+\section{Variables}
-If the channel has a cdr, that cdr record has its own set of variables which
-can be accessed just like channel variables. The following builtin variables
-are available.
+If the channel has a CDR, that CDR has its own set of variables which can be
+accessed just like channel variables. The following builtin variables are
+available.
\begin{verbatim}
${CDR(clid)} Caller ID
Modified: branches/1.6.2/doc/tex/cdrdriver.tex
URL: http://svn.asterisk.org/svn-view/asterisk/branches/1.6.2/doc/tex/cdrdriver.tex?view=diff&rev=202842&r1=202841&r2=202842
==============================================================================
--- branches/1.6.2/doc/tex/cdrdriver.tex (original)
+++ branches/1.6.2/doc/tex/cdrdriver.tex Tue Jun 23 18:58:26 2009
@@ -1,10 +1,10 @@
-\section{CDR Back Ends}
-
-\subsection{MSSQL}
+\section{Storage Backends}
+
+\subsection{Microsoft SQL Server}
Asterisk can currently store CDRs into an MSSQL database in
two different ways: cdr\_odbc or cdr\_tds
-
+
Call Data Records can be stored using unixODBC (which requires
the FreeTDS package) [cdr\_odbc] or directly by using just the
FreeTDS package [cdr\_tds] The following provide some
@@ -195,11 +195,11 @@
call to the database when it's complete.
-\subsection{MYSQL}
+\subsection{MySQL}
Using MySQL for CDR records is supported by using ODBC and the cdr\_odbc module.
-\subsection{PGSQL}
+\subsection{PostgreSQL}
If you want to go directly to postgresql database, and have the cdr\_pgsql.so
compiled you can use the following sample setup.
On Debian, before compiling asterisk, just install libpqxx-dev.
@@ -246,9 +246,13 @@
\end{verbatim}
\end{astlisting}
-\subsection{SQLLITE}
+\subsection{SQLite 2}
SQLite version 2 is supported in cdr\_sqlite.
+
+\subsection{SQLite 3}
+
+SQLite version 3 is supported in cdr\_sqlite3\_custom.
\subsection{RADIUS}
@@ -291,9 +295,9 @@
\subsubsection{Installation of the Radiusclient library}
- Download the sources from
+ Download the sources from
\url{http://developer.berlios.de/projects/radiusclient-ng/}
-
+
Untar the source tarball:
\begin{verbatim}
@@ -310,15 +314,15 @@
\end{verbatim}
\subsubsection{Configuration of the Radiusclient library}
-
+
By default all the configuration files of the radiusclient library will
be in \path{/usr/local/etc/radiusclient-ng} directory.
-
+
File "radiusclient.conf"
Open the file and find lines containing the following:
authserver localhost
-
+
This is the hostname or IP address of the RADIUS server used for
authentication. You will have to change this unless the server is
running on the same host as your Asterisk PBX.
@@ -330,10 +334,10 @@
on the same host as your Asterisk PBX.
\textbf{File "servers"}
-
+
RADIUS protocol uses simple access control mechanism based on shared
secrets that allows RADIUS servers to limit access from RADIUS clients.
-
+
A RADIUS server is configured with a secret string and only RADIUS
clients that have the same secret will be accepted.
@@ -347,7 +351,7 @@
are going to use.
\textbf{File "dictionary"}
-
+
Asterisk uses some attributes that are not included in the
dictionary of radiusclient library, therefore it is necessary to add
them. A file called dictionary.digium (kept in the contrib dir)
@@ -362,7 +366,7 @@
Download sources tarball from:
\url{http://freeradius.org/}
-
+
Untar, configure, build, and install the server:
\begin{verbatim}
@@ -375,15 +379,15 @@
All the configuration files of FreeRADIUS server will be in
/usr/local/etc/raddb directory.
-
+
\subsubsection{Configuration of the FreeRADIUS Server}
-
+
There are several files that have to be modified to configure the
RADIUS server. These are presented next.
File "clients.conf"
-
+
File \path{/usr/local/etc/raddb/clients.conf} contains description of
RADIUS clients that are allowed to use the server. For each of the
clients you need to specify its hostname or IP address and also a
@@ -396,26 +400,26 @@
secret = mysecret
shortname = foo
}
-\end{verbatim}
+\end{verbatim}
This fragment allows access from RADIUS clients on "myhost" if they use
- "mysecret" as the shared secret.
+ "mysecret" as the shared secret.
The file already contains an entry for localhost (127.0.0.1), so if you
are running the RADIUS server on the same host as your Asterisk server,
then modify the existing entry instead, replacing the default password.
-
+
File "dictionary"
-
+
Note: as of version 1.1.2, the dictionary.digium file ships with FreeRADIUS.
The following procedure brings the dictionary.digium file to previous versions
of FreeRADIUS.
-
+
File \path{/usr/local/etc/raddb/dictionary} contains the dictionary of
FreeRADIUS server. You have to add the same dictionary file
(dictionary.digium), which you added to the dictionary of radiusclient-ng
library. You can include it into the main file, adding the following line at the
end of file \path{/usr/local/etc/raddb/dictionary}:
-
+
\$INCLUDE /path/to/dictionary.digium
That will include the same new attribute definitions that are used
@@ -429,7 +433,7 @@
The module will be compiled as long as the radiusclient-ng
library has been detected on your system.
-
+
By default FreeRADIUS server will log all accounting requests into
\path{/usr/local/var/log/radius/radacct} directory in form of plain text files.
The server will create one file for each hostname in the directory. The
@@ -440,7 +444,7 @@
separated values will be created in \path{/var/log/asterisk/cdr-csv}.
The configuration file for cdr\_radius.so module is \path{/etc/asterisk/cdr.conf}
-
+
This is where you can set CDR related parameters as well as the path to
the radiusclient-ng library configuration file.
More information about the svn-commits
mailing list