[svn-commits] tzafrir: branch 1.4 r4584 - in /branches/1.4: ./ kernel/xpp/

SVN commits to the Digium repositories svn-commits at lists.digium.com
Tue Nov 18 05:36:46 CST 2008


Author: tzafrir
Date: Tue Nov 18 05:36:45 2008
New Revision: 4584

URL: http://svn.digium.com/view/zaptel?view=rev&rev=4584
Log:
xpp_pri: Fix T1 CRC initialization
         Clock synchronization when sync is not from first port.

Merged revisions 4583 via svnmerge from 
http://svn.digium.com/svn/zaptel/branches/1.2

Modified:
    branches/1.4/   (props changed)
    branches/1.4/kernel/xpp/card_pri.c
    branches/1.4/kernel/xpp/init_card_4_30

Propchange: branches/1.4/
------------------------------------------------------------------------------
Binary property 'branch-1.2-merged' - no diff available.

Modified: branches/1.4/kernel/xpp/card_pri.c
URL: http://svn.digium.com/view/zaptel/branches/1.4/kernel/xpp/card_pri.c?view=diff&rev=4584&r1=4583&r2=4584
==============================================================================
--- branches/1.4/kernel/xpp/card_pri.c (original)
+++ branches/1.4/kernel/xpp/card_pri.c Tue Nov 18 05:36:45 2008
@@ -208,7 +208,8 @@
 #define	REG_FMR1_XAIS	BIT(0)	/* Transmit AIS toward transmit end */
 #define	REG_FMR1_SSD0	BIT(1)
 #define	REG_FMR1_ECM	BIT(2)
-#define	REG_FMR1_XFS	BIT(3)	/* Transmit Framing Select */
+#define	REG_FMR1_T_CRC	BIT(3)	/* Enable CRC6 */
+#define	REG_FMR1_E_XFS	BIT(3)	/* Transmit Framing Select */
 #define	REG_FMR1_PMOD	BIT(4)	/* E1 = 0, T1/J1 = 1 */
 #define	REG_FMR1_EDL	BIT(5)
 #define	REG_FMR1_AFR	BIT(6)
@@ -280,6 +281,15 @@
 #define	REG_RS14_E	0x7D	/* Receive CAS Register 14	*/
 #define	REG_RS15_E	0x7E	/* Receive CAS Register 15	*/
 #define	REG_RS16_E	0x7F	/* Receive CAS Register 16	*/
+
+#define	REG_PC2		0x81	/* Port Configuration 2	*/
+#define	REG_PC3		0x82	/* Port Configuration 3	*/
+#define	REG_PC4		0x83	/* Port Configuration 4	*/
+
+#define	VAL_PC_SYPR	0x00	/* Synchronous Pulse Receive (Input, low active) */
+#define	VAL_PC_GPI	0x90	/* General purpose input */
+#define	VAL_PC_GPOH	0x0A	/* General Purpose Output, high level */
+#define	VAL_PC_GPOL	0x0B	/* General Purpose Output, low level */
 
 #define	NUM_CAS_RS	(REG_RS16_E - REG_RS2_E + 1)
 
@@ -371,7 +381,7 @@
 		regnum, val);
 	return xpp_register_request(
 			xpd->xbus, xpd,
-			PRI_PORT(xpd),		/* portno	*/
+			0,			/* portno=0	*/
 			1,			/* writing	*/
 			regnum,
 			0,			/* do_subreg	*/
@@ -600,13 +610,16 @@
 	}
 	/* Now set it */
 	if(best_xpd && ((struct PRI_priv_data *)(best_xpd->priv))->clock_source == 0) {
-		byte	cmr1_val =
-				REG_CMR1_RS |
-				REG_CMR1_STF |
-				(REG_CMR1_DRSS & (best_subunit << 6));
-		XPD_DBG(SYNC, best_xpd,
-			"ClockSource Set: cmr1=0x%02X\n", cmr1_val);
-		pri_write_reg(xpd, REG_CMR1, cmr1_val);
+		byte	reg_pc_init[] = { VAL_PC_SYPR, VAL_PC_GPI, VAL_PC_GPI };
+
+		for(i = 0; i < ARRAY_SIZE(reg_pc_init); i++) {
+			byte	reg_pc = reg_pc_init[i];
+
+			reg_pc |= (best_subunit & (1 << i)) ? VAL_PC_GPOH : VAL_PC_GPOL;
+			XPD_DBG(SYNC, best_xpd,
+					"ClockSource Set: PC%d=0x%02X\n", 2+i, reg_pc);
+			pri_write_reg(xpd, REG_PC2 + i, reg_pc);
+		}
 		((struct PRI_priv_data *)(best_xpd->priv))->clock_source = 1;
 	}
 	/* clear old clock sources */
@@ -784,7 +797,7 @@
 		fmr4 = 0x9F;								/*  E1.XSW:  All spare bits = 1*/
 		xsp |= REG_XSP_E_EBP | REG_XSP_E_AXS | REG_XSP_E_XSIF;
 	} else if(priv->pri_protocol == PRI_PROTO_T1) {
-		fmr1 |= REG_FMR1_PMOD;
+		fmr1 |= REG_FMR1_PMOD | REG_FMR1_T_CRC;
 		fmr2 = REG_FMR2_T_SSP | REG_FMR2_T_AXRA;	/* 0x22 */
 		fmr4 = 0x0C;
 		xsp |= REG_FMR5_T_XTM;
@@ -830,10 +843,14 @@
 		priv->is_cas = 1;
 	}
 	pri_pcm_update(xpd);
-	/* E1's can enable CRC checking */
+	/*
+	 * E1's can enable CRC checking
+	 * CRC4 is legal only for E1, and it is checked by pri_linecompat()
+	 * in the beginning of the function.
+	 */
 	if (lineconfig & ZT_CONFIG_CRC4) {
 		crcstr = "CRC4";
-		fmr1 |= REG_FMR1_XFS;
+		fmr1 |= REG_FMR1_E_XFS;
 		fmr2 |= REG_FMR2_E_RFS1;
 		fmr3 |= REG_FMR3_EXTIW;
 	}
@@ -1310,7 +1327,7 @@
 	spin_unlock_irqrestore(&xpd->lock, flags);
 	LINE_DBG(SIGNAL, xpd, pos, "RBS: TX: bits=0x%X (reg=0x%X val=0x%02X)\n",
 		bits, regnum, val);
-	pri_write_reg(xpd, regnum, val);
+	write_subunit(xpd, regnum, val);
 	return 0;
 }
 

Modified: branches/1.4/kernel/xpp/init_card_4_30
URL: http://svn.digium.com/view/zaptel/branches/1.4/kernel/xpp/init_card_4_30?view=diff&rev=4584&r1=4583&r2=4584
==============================================================================
--- branches/1.4/kernel/xpp/init_card_4_30 (original)
+++ branches/1.4/kernel/xpp/init_card_4_30 Tue Nov 18 05:36:45 2008
@@ -102,6 +102,10 @@
 
 sub init_quad() {
 	main::select_subunit(0);
+
+	PRI::gen "0 WD D6 20"; 		# GPC6.COMP_DIS=1
+					# (Compatibility Mode Disable)
+
 	# Tuning of clocking unit to the 16.384 MHz reference frequence
 	# by setting Global Clock Mode registers (GCM[1:8]), same for E1 and T1/J1
 	PRI::gen "0 WD 92 00"; 		# GCM1
@@ -135,9 +139,6 @@
 	PRI::gen "0 WD BC 00"; 		# REGFD
 
 #	PRI::gen "0 WD 80 00"; 	# PC1 (Port configuration 1): RPB_1.SYPR           , XPB_1.SYPX
-	PRI::gen "0 WD 81 0B"; 	# PC2 (Port configuration 2): RPB_1.GPOH (ResetID ), XPB_1.GPOL (MUX_SEL0)
-	PRI::gen "0 WD 82 9B"; 	# PC3 (Port configuration 3): RPC_1.GPI  (nConfig0), XPC_1.GPOL (MUX_SEL1)
-	PRI::gen "0 WD 83 9B"; 	# PC4 (Port configuration 4): RPD_1.GPI  (nConfig1), XPD_1.GPOL (MUX_SEL2)
 }
 
 sub read_pri_specs() {
@@ -223,9 +224,9 @@
 	my $port = shift;
 	my $portno = $port->{PORT_NUM};
 
-	# only one of the following loopbacks can be activated in the same time 
-	my $LIM1_RL  = 0 << 1; 	# RL  (Remote  Loopback)
-	my $lim1 = 0xB0 | $LIM1_RL;
+	my $cmr5 = sprintf("%x", ($portno << 5));
+
+	PRI::gen "$portno WD 42 $cmr5"; # CMR5.DRSS=portno
 
 	PRI::gen "$portno WD 26 F6"; 	# XPM0: Pulse Shape Programming for R1=18Ohms 
 	PRI::gen "$portno WD 27 02"; 	# XPM1: ...3V Pulse Level at the line (Vp-p=6v)
@@ -245,6 +246,9 @@
 	#	PRI::gen "0 WD 1F 20";	# LOOP (Channel Looback): 
 	#}
 
+	# only one of the following loopbacks can be activated in the same time 
+	my $LIM1_RL  = 0 << 1; 	# RL  (Remote  Loopback)
+	my $lim1 = 0xB0 | $LIM1_RL;
 	PRI::gen "$portno WD 37 %02X", $lim1;
 					# LIM1: ~RL (Remote Loop bit 0x02),
 					#       ~DRS (Dual Rail Select, latch receive data while trasmit),




More information about the svn-commits mailing list