[svn-commits] tilghman: trunk r117182 - in /trunk: ./ channels/ configs/

SVN commits to the Digium repositories svn-commits at lists.digium.com
Mon May 19 15:06:39 CDT 2008


Author: tilghman
Date: Mon May 19 15:06:38 2008
New Revision: 117182

URL: http://svn.digium.com/view/asterisk?view=rev&rev=117182
Log:
Change the default for the pridialplan parameter to the far more common case of
'unknown', and better document the use of each parameter.
(closes issue #12633)
 Reported by: tzafrir
 Patches: 
       pridialplan_unknown_2.diff uploaded by tzafrir (license 46)

Modified:
    trunk/CHANGES
    trunk/channels/chan_zap.c
    trunk/configs/zapata.conf.sample

Modified: trunk/CHANGES
URL: http://svn.digium.com/view/asterisk/trunk/CHANGES?view=diff&rev=117182&r1=117181&r2=117182
==============================================================================
--- trunk/CHANGES (original)
+++ trunk/CHANGES Mon May 19 15:06:38 2008
@@ -19,6 +19,7 @@
 ----------------------------------------
  * Channels can now be configured using named sections in zapata.conf, just
    like other channel drivers, including the use of templates.
+ * The default for pridialplan has changed from 'national' to 'unknown'.
 
 PBX Changes
 -----------

Modified: trunk/channels/chan_zap.c
URL: http://svn.digium.com/view/asterisk/trunk/channels/chan_zap.c?view=diff&rev=117182&r1=117181&r2=117182
==============================================================================
--- trunk/channels/chan_zap.c (original)
+++ trunk/channels/chan_zap.c Mon May 19 15:06:38 2008
@@ -750,7 +750,7 @@
 		.pri = {
 			.nsf = PRI_NSF_NONE,
 			.switchtype = PRI_SWITCH_NI2,
-			.dialplan = PRI_NATIONAL_ISDN + 1,
+			.dialplan = PRI_UNKNOWN + 1,
 			.localdialplan = PRI_NATIONAL_ISDN + 1,
 			.nodetype = PRI_CPE,
 

Modified: trunk/configs/zapata.conf.sample
URL: http://svn.digium.com/view/asterisk/trunk/configs/zapata.conf.sample?view=diff&rev=117182&r1=117181&r2=117182
==============================================================================
--- trunk/configs/zapata.conf.sample (original)
+++ trunk/configs/zapata.conf.sample Mon May 19 15:06:38 2008
@@ -79,10 +79,20 @@
 ;
 ;nsf=none
 ;
-; PRI Dialplan:  Only RARELY used for PRI.
+; PRI Dialplan: The ISDN-level Type Of Number (TON) or numbering plan, used for
+; the dialed number.  For most installations, leaving this as 'unknown' (the
+; default) works in the most cases.  In some very unusual circumstances, you
+; may need to set this to 'dynamic' or 'redundant'.  Note that if you set one
+; of the others, you will be unable to dial another class of numbers.  For
+; example, if you set 'national', you will be unable to dial local or
+; international numbers.
+;
 ; PRI Local Dialplan:  Only RARELY used for PRI (sets the calling number's 
-; numbering plan)
-; pridialplan and prilocaldialplan cannot be changed on a reload.
+; numbering plan).  In North America, the typical use is sending the 10 digit
+; callerID number and setting the prilocaldialplan to 'national' (the default).
+; Only VERY rarely will you need to change this.
+;
+; Neither pridialplan nor prilocaldialplan can be changed on reload.
 ;
 ; unknown:        Unknown
 ; private:        Private ISDN
@@ -93,7 +103,7 @@
 ; redundant:      Same as dynamic, except that the underlying number is not 
 ;                 changed (not common)
 ;
-;pridialplan=national
+;pridialplan=unknown
 ;prilocaldialplan=national
 ; 
 ; pridialplan may be also set at dialtime, by prefixing the dialled number with




More information about the svn-commits mailing list