[svn-commits] tzafrir: branch tzafrir/move r3769 - in /team/tzafrir/move: ./ kernel/ kernel...
SVN commits to the Digium repositories
svn-commits at lists.digium.com
Wed Jan 30 19:55:16 CST 2008
Author: tzafrir
Date: Wed Jan 30 19:55:15 2008
New Revision: 3769
URL: http://svn.digium.com/view/zaptel?view=rev&rev=3769
Log:
Make 2.4 build: cut part of the main makefile into kernel/GNUmakefile .
GNUmakefile has precedense over 'Makefile' (that we must still keep use
if we are to maintain compatibility iwth kernel 2.6.9).
This still won't build 2.4 - see #11884 for a quick patch to make it
build.
Added:
team/tzafrir/move/kernel/GNUmakefile
- copied, changed from r3763, team/tzafrir/move/Makefile
team/tzafrir/move/kernel/sec-2.h
- copied unchanged from r3758, team/tzafrir/move/sec-2.h
Removed:
team/tzafrir/move/sec-2.h
Modified:
team/tzafrir/move/Makefile
team/tzafrir/move/kernel/wct4xxp/Makefile
Modified: team/tzafrir/move/Makefile
URL: http://svn.digium.com/view/zaptel/team/tzafrir/move/Makefile?view=diff&rev=3769&r1=3768&r2=3769
==============================================================================
--- team/tzafrir/move/Makefile (original)
+++ team/tzafrir/move/Makefile Wed Jan 30 19:55:15 2008
@@ -188,8 +188,13 @@
KFLAGS+=-DSTANDALONE_ZAPATA
CFLAGS+=-DSTANDALONE_ZAPATA
+ifeq ($(BUILDVER),linux24)
+KMAKE = $(MAKE) -C kernel HOTPLUG_FIRMWARE=$(HOTPLUG_FIRMWARE) \
+ BUILD_TOPDIR_MODULES="$(BUILD_TOPDIR_MODULES)" BUILD_SUBDIR_MODULES="$(BUILD_SUBDIR_MODULES)"
+else
KMAKE = $(MAKE) -C $(KSRC) SUBDIRS=$(PWD)/kernel \
HOTPLUG_FIRMWARE=$(HOTPLUG_FIRMWARE) KBUILD_OBJ_M="$(KBUILD_OBJ_M)"
+endif
KMAKE_INST = $(KMAKE) \
INSTALL_MOD_PATH=$(DESTDIR) INSTALL_MOD_DIR=misc modules_install
@@ -295,11 +300,11 @@
modules:
@if [ -z "$(KSRC)" -o ! -d "$(KSRC)" ]; then echo "You do not appear to have the sources for the $(KVERS) kernel installed."; exit 1 ; fi
-ifeq ($(BUILDVER),linux26)
+#ifeq ($(BUILDVER),linux26)
$(KMAKE) modules
-else
-modules: $(INSTALL_MODULES)
-endif
+#else
+#modules: $(INSTALL_MODULES)
+#endif
ifeq ($(HPEC_PRESENT),yes)
ifeq ($(ARCH),i386)
@@ -615,17 +620,11 @@
clean:
-@$(MAKE) -C menuselect clean
- rm -f torisatool makefw tor2fw.h radfw.h
+ rm -f torisatool
rm -f $(BINS)
rm -f *.o ztcfg tzdriver sethdlc sethdlc-new
rm -f $(LTZ_SO) $(LTZ_A) *.lo
-ifeq ($(BUILDVER),linux26)
- ifneq (,$(KSRC))
$(KMAKE) clean
- endif
-else
- $(MAKE) -C wct4xxp clean
-endif
@for dir in $(SUBDIRS_UTILS_ALL); do \
$(MAKE) -C $$dir clean; \
done
Copied: team/tzafrir/move/kernel/GNUmakefile (from r3763, team/tzafrir/move/Makefile)
URL: http://svn.digium.com/view/zaptel/team/tzafrir/move/kernel/GNUmakefile?view=diff&rev=3769&p1=team/tzafrir/move/Makefile&r1=3763&p2=team/tzafrir/move/kernel/GNUmakefile&r2=3769
==============================================================================
--- team/tzafrir/move/Makefile (original)
+++ team/tzafrir/move/kernel/GNUmakefile Wed Jan 30 19:55:15 2008
@@ -1,64 +1,20 @@
#
-# Makefile for Zaptel driver modules and utilities
+# Zaptel kernel 2.4 makefile
#
-# Copyright (C) 2001-2007 Digium, Inc.
-#
+# Copyright (C) 2008 Digium, Inc.
#
-ifneq ($(KBUILD_EXTMOD),)
-# We only get in here if we're from kernel 2.6 <= 2.6.9 and going through
-# Kbuild. Later versions will include Kbuild instead of Makefile.
-include $(src)/Kbuild
-
-else
-
-CFLAGS+=-DSTANDALONE_ZAPATA -DBUILDING_TONEZONE
+CFLAGS+=-DSTANDALONE_ZAPATA
ifeq ($(MAKELEVEL),0)
PWD:=$(shell pwd)
endif
-ARCH:=$(shell uname -m | sed -e s/i.86/i386/)
-
-ifeq ($(DEB_HOST_GNU_TYPE),)
-UNAME_M:=$(shell uname -m)
-else
-UNAME_M:=$(DEB_HOST_GNU_TYPE)
-endif
-
-# If you want to build for a kernel other than the current kernel, set KVERS
-ifndef KVERS
-KVERS:=$(shell uname -r)
-endif
-ifndef KSRC
- ifneq (,$(wildcard /lib/modules/$(KVERS)/build))
- KSRC:=/lib/modules/$(KVERS)/build
- else
- KSRC_SEARCH_PATH:=/usr/src/linux-2.4 /usr/src/linux
- KSRC:=$(shell for dir in $(KSRC_SEARCH_PATH); do if [ -d $$dir ]; then echo $$dir; break; fi; done)
- endif
-endif
-KVERS_MAJ:=$(shell echo $(KVERS) | cut -d. -f1-2)
KINCLUDES:=$(KSRC)/include
-ifeq ($(KVERS_MAJ),2.4)
- BUILDVER:=linux24
-else
- BUILDVER:=linux26
-endif
+BUILDVER:=linux24
-# Set HOTPLUG_FIRMWARE=no to override automatic building with hotplug support
-# if it is enabled in the kernel.
-ifeq ($(BUILDVER),linux26)
- ifneq (,$(wildcard $(DESTDIR)/etc/udev/rules.d))
- DYNFS=yes
- UDEVRULES=yes
- endif
- HOTPLUG_FIRMWARE:=$(shell if grep CONFIG_FW_LOADER $(KINCLUDES)/linux/autoconf.h | grep -q undef; then echo "no"; else echo "yes"; fi)
-else
- # Hotplug firmware loading is not supported on any other version then 2.6
- HOTPLUG_FIRMWARE:=no
-endif
+HOTPLUG_FIRMWARE:=no
ifeq ($(HOTPLUG_FIRMWARE),yes)
CFLAGS+=-DHOTPLUG_FIRMWARE
@@ -76,84 +32,9 @@
endif
endif
-# If the file .zaptel.makeopts is present in your home directory, you can
-# include all of your favorite menuselect options so that every time you download
-# a new version of Asterisk, you don't have to run menuselect to set them.
-# The file /etc/zaptel.makeopts will also be included but can be overridden
-# by the file in your home directory.
-
-GLOBAL_MAKEOPTS=$(wildcard /etc/zaptel.makeopts)
-USER_MAKEOPTS=$(wildcard ~/.zaptel.makeopts)
-
-ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
- ifneq ($(wildcard menuselect.makeopts),)
- include menuselect.makeopts
- endif
-endif
-
-ifeq ($(strip $(foreach var,clean distclean dist-clean update,$(findstring $(var),$(MAKECMDGOALS)))),)
- ifneq ($(wildcard makeopts),)
- include makeopts
- endif
-endif
-
-ifeq ($(BUILDVER),linux24)
-MENUSELECT_MODULES+=xpp wctc4xxp wctdm24xxp zttranscode
-endif
-
-ifeq ($(findstring xpp,$(MENUSELECT_MODULES)),)
- BUILD_XPP:=yes
-endif
-
-SUBDIRS_UTILS_ALL:= kernel/xpp/utils ppp
-SUBDIRS_UTILS :=
-ifeq ($(BUILD_XPP),yes)
- SUBDIRS_UTILS += kernel/xpp/utils
-endif
-#SUBDIRS_UTILS += ppp
-
-TOPDIR_MODULES:=pciradio tor2 torisa wcfxo wct1xxp wctdm wcte11xp wcusb zaptel ztd-eth ztd-loc ztdummy ztdynamic zttranscode
-SUBDIR_MODULES:=wct4xxp wctc4xxp xpp wctdm24xxp wcte12xp
-TOPDIR_MODULES+=$(MODULES_EXTRA)
-SUBDIR_MODULES+=$(SUBDIRS_EXTRA)
-BUILD_TOPDIR_MODULES:=$(filter-out $(MENUSELECT_MODULES),$(TOPDIR_MODULES))
-BUILD_SUBDIR_MODULES:=$(filter-out $(MENUSELECT_MODULES),$(SUBDIR_MODULES))
BUILD_MODULES:=$(BUILD_TOPDIR_MODULES) $(BUILD_SUBDIR_MODULES)
-
-MOD_DESTDIR:=zaptel
-
-KERN_DIR:=kernel
-
-#NOTE NOTE NOTE
-#
-# all variables set before the include of Makefile.kernel26 are needed by the 2.6 kernel module build process
-
-ifneq ($(KBUILD_EXTMOD),)
-
-obj-m:=$(BUILD_TOPDIR_MODULES:%=%.o)
-obj-m+=$(BUILD_SUBDIR_MODULES:%=%/)
-
-include $(src)/Makefile.kernel26
-
-else
-KBUILD_OBJ_M=$(BUILD_TOPDIR_MODULES:%=%.o) $(BUILD_SUBDIR_MODULES:%=%/)
-
-ifeq ($(BUILDVER),linux24)
- INSTALL_MODULES:=$(BUILD_TOPDIR_MODULES:%=$(KERN_DIR)/%.o)
- INSTALL_MODULES+=$(foreach mod,$(BUILD_SUBDIR_MODULES),$(mod)/$(mod).o)
- ALL_MODULES:=$(TOPDIR_MODULES:%=$(KERN_DIR)/%.o)
- ALL_MODULES+=$(SUBDIR_MODULES:%=$(KERN_DIR)/%/%.o)
-else
- INSTALL_MODULES:=$(BUILD_TOPDIR_MODULES:%=$(KERN_DIR)/%.ko)
- INSTALL_MODULES+=$(foreach mod,$(filter-out xpp,$(BUILD_SUBDIR_MODULES)),$(KERN_DIR)/$(mod)/$(mod).ko)
- ifneq ($(filter xpp,$(BUILD_SUBDIR_MODULES)),)
- INSTALL_MODULES+=$(patsubst %,$(KERN_DIR)/xpp/%.ko,xpp_usb xpd_fxo xpd_fxs xpp)
- endif
-
- ALL_MODULES:=$(TOPDIR_MODULES:%=%.ko)
- ALL_MODULES+=$(foreach mod,$(filter-out xpp,$(SUBDIR_MODULES)),$(mod)/$(mod).ko)
- ALL_MODULES+=$(patsubst %,xpp/%.ko,xpp_usb xpd_fxo xpd_fxs xpp)
-endif
+ALL_MODULES := $(BUILD_TOPDIR_MODULES:%=%.o) \
+ $(join $(BUILD_SUBDIR_MODULES:%=%/), $(BUILD_SUBDIR_MODULES:%=%.o))
OPTFLAG=-O2
CFLAGS+=-I. $(OPTFLAGS) -g -fPIC -Wall -DBUILDING_TONEZONE #-DTONEZONE_DRIVER
@@ -174,11 +55,9 @@
KFLAGS_PPC:=-msoft-float -fsigned-char
endif
KFLAGS+=$(KFLAGS_PPC)
-ifeq ($(KVERS_MAJ),2.4)
ifneq (,$(findstring x86_64,$(UNAME_M)))
KFLAGS+=-mcmodel=kernel
endif
-endif
#
# Features are now configured in zconfig.h
@@ -187,119 +66,10 @@
MODULE_ALIASES=wcfxs wctdm8xxp wct2xxp
KFLAGS+=-DSTANDALONE_ZAPATA
-CFLAGS+=-DSTANDALONE_ZAPATA
-KMAKE = $(MAKE) -C $(KSRC) SUBDIRS=$(PWD)/kernel \
- HOTPLUG_FIRMWARE=$(HOTPLUG_FIRMWARE) KBUILD_OBJ_M="$(KBUILD_OBJ_M)"
-KMAKE_INST = $(KMAKE) \
- INSTALL_MOD_PATH=$(DESTDIR) INSTALL_MOD_DIR=misc modules_install
-ROOT_PREFIX=
-
-CONFIG_FILE=/etc/zaptel.conf
-CFLAGS+=-DZAPTEL_CONFIG=\"$(CONFIG_FILE)\"
-
-# sample makefile "trace print"
-#tracedummy=$(shell echo ====== GOT HERE ===== >&2; echo >&2)
-
-CHKCONFIG := $(wildcard /sbin/chkconfig)
-UPDATE_RCD := $(wildcard /usr/sbin/update-rc.d)
-ifeq (,$(DESTDIR))
- ifneq (,$(CHKCONFIG))
- ADD_INITD := $(CHKCONFIG) --add zaptel
- else
- ifndef (,$(UPDATE_RCD))
- ADD_INITD := $(UPDATE_RCD) zaptel defaults 15 30
- endif
- endif
-endif
-
-INITRD_DIR := $(firstword $(wildcard /etc/rc.d/init.d /etc/init.d))
-ifneq (,$(INITRD_DIR))
- INIT_TARGET := $(DESTDIR)$(INITRD_DIR)/zaptel
- COPY_INITD := install -D zaptel.init $(INIT_TARGET)
-endif
-RCCONF_DIR := $(firstword $(wildcard /etc/sysconfig /etc/default))
-
-NETSCR_DIR := $(firstword $(wildcard /etc/sysconfig/network-scripts ))
-ifneq (,$(NETSCR_DIR))
- NETSCR_TARGET := $(DESTDIR)$(NETSCR_DIR)/ifup-hdlc
- COPY_NETSCR := install -D ifup-hdlc $(NETSCR_TARGET)
-endif
-
-ifneq ($(wildcard .version),)
- ZAPTELVERSION:=$(shell cat .version)
-else
-ifneq ($(wildcard .svn),)
- ZAPTELVERSION=SVN-$(shell build_tools/make_svn_branch_name)
-endif
-endif
-
-LTZ_A:=libtonezone.a
-LTZ_A_OBJS:=zonedata.o tonezone.o
-LTZ_SO:=libtonezone.so
-LTZ_SO_OBJS:=zonedata.lo tonezone.lo
-LTZ_SO_MAJOR_VER:=1
-LTZ_SO_MINOR_VER:=0
-
-# libdir, includedir and mandir are defined in makeopts (from
-# configure).
-# we use /sbin, rather than configure's $(sbindir) because we use /sbin
-# for historical reasons.
-BIN_DIR:=/sbin
-LIB_DIR:=$(libdir)
-INC_DIR:=$(includedir)/zaptel
-MAN_DIR:=$(mandir)/man8
MOD_DIR:=$(DESTDIR)/lib/modules/$(KVERS)/misc
-# Utilities we build with a standard build procedure:
-UTILS = zttool zttest ztmonitor ztspeed sethdlc-new ztcfg \
- ztcfg-dude usbfxstest fxstest fxotune ztdiag torisatool \
- ztscan
-
-
-# Makefile mentions them. Source is not included (anynore?)
-UTILS += fxsdump ztprovision
-
-# some tests:
-UTILS += patgen pattest patlooptest hdlcstress hdlctest hdlcgen \
- hdlcverify timertest
-
-UTILSO = $(UTILS:%=%.o)
-
-BINS:=fxotune fxstest sethdlc-new ztcfg ztdiag ztmonitor ztspeed zttest ztscan
-ifeq (1,$(PBX_LIBNEWT))
- BINS+=zttool
-endif
-BINS:=$(filter-out $(MENUSELECT_UTILS),$(BINS))
-MAN_PAGES:=$(wildcard $(BINS:%=doc/%.8))
-
-# All the man pages. Not just installed ones:
-GROFF_PAGES := $(wildcard doc/*.8)
-GROFF_HTML := $(GROFF_PAGES:%=%.html)
-
-all: menuselect.makeopts
- @$(MAKE) _all
-
-_all: $(if $(BUILD_MODULES),modules) programs
-
-libs: $(LTZ_SO) $(LTZ_A)
-
-utils-subdirs:
- @for dir in $(SUBDIRS_UTILS); do \
- $(MAKE) -C $$dir; \
- done
-
-programs: libs utils
-
-utils: $(BINS) utils-subdirs
-
-modules:
- @if [ -z "$(KSRC)" -o ! -d "$(KSRC)" ]; then echo "You do not appear to have the sources for the $(KVERS) kernel installed."; exit 1 ; fi
-ifeq ($(BUILDVER),linux26)
- $(KMAKE) modules
-else
-modules: $(INSTALL_MODULES)
-endif
+all: modules
ifeq ($(HPEC_PRESENT),yes)
ifeq ($(ARCH),i386)
@@ -314,68 +84,20 @@
zaptel-base.o: hpec/hpec_zaptel.h hpec/hpec_user.h
endif
-version.h:
- @ZAPTELVERSION="${ZAPTELVERSION}" build_tools/make_version_h > $@.tmp
- @if cmp -s $@.tmp $@ ; then :; else \
- mv $@.tmp $@ ; \
- fi
- @rm -f $@.tmp
+prereq: tor2fw.h radfw.h version.h
-tests: patgen pattest patlooptest hdlcstress hdlctest hdlcgen hdlcverify timertest
+tor2fw.h: tormenta2.rbt makefw
+ ./makefw $< tor2fw > $@
-zonedata.lo: zonedata.c
- $(CC) -c $(CFLAGS) -o $@ $^
+radfw.h: pciradio.rbt makefw
+ ./makefw $< radfw > $@
-tonezone.lo: tonezone.c
- $(CC) -c $(CFLAGS) -o $@ $^
+makefw: makefw.c
+ $(HOSTCC) -o $@ $^
+
-prereq: config.status tor2fw.h radfw.h version.h
+modules: $(ALL_MODULES)
-zttool.o: kernel/zaptel.h
-zttool.o: CFLAGS+=$(NEWT_INCLUDE)
-zttool: LDLIBS+=$(NEWT_LIB)
-
-ztscan.o: kernel/zaptel.h
-
-ztprovision.o: kernel/zaptel.h
-
-ztmonitor.o: kernel/zaptel.h
-
-ztspeed: CFLAGS=
-
-sethdlc-new: CFLAGS+=-I$(KINCLUDES)
-
-$(LTZ_A): $(LTZ_A_OBJS)
- ar rcs $@ $^
- ranlib $@
-
-$(LTZ_SO): $(LTZ_SO_OBJS)
- $(CC) $(CFLAGS) -shared -Wl,-soname,$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) -o $@ $^ $(LDFLAGS) $(LDLIBS) -lm
-
-ztcfg.o: ztcfg.h kernel/zaptel.h
-ztcfg: ztcfg.o $(LTZ_A)
-ztcfg: LDLIBS+=-lm
-
-ztcfg-shared: ztcfg.o $(LTZ_SO)
- $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LDLIBS) -lm
-
-ztcfg-dude: ztcfg-dude.o mknotch.o complex.o $(LTZ_SO)
-ztcfg-dude: LDLIBS+=-lm -lstdc++
-
-data:
- $(MAKE) -C datamods datamods
-
-# FIXME: we assume CC can build the C++ modules:
-complex.o mknotch.o: %.o: %.cc
- $(CC) $(CFLAGS) -o $@ -c $<
-
-usbfxstest: LDLIBS+=-lzap
-fxstest: $(LTZ_SO)
-fxstest: LDLIBS+=-lm
-fxotune: LDLIBS+=-lm
-fxsdump: LDLIBS+=-lm
-
-ifeq ($(BUILDVER),linux24)
wct4xxp/wct4xxp.o:
$(MAKE) -C wct4xxp KFLAGS="$(KFLAGS) -I.." CFLAGS="$(CFLAGS) -I.."
@@ -402,51 +124,6 @@
$(filter-out zaptel.o,$(BUILD_TOPDIR_MODULES:%=%.o)) zaptel-base.o: %.o: %.c zaptel.h
$(CC) $(KFLAGS) -o $@ -c $<
-endif
-
-stackcheck: checkstack modules
- ./checkstack *.ko */*.ko
-
-README.html: README
- $(ASCIIDOC) -n -a toc -a toclevels=3 $<
-
-xpp/README.Astribank.html: xpp/README.Astribank
- cd $(@D); $(ASCIIDOC) -o $(@F) -n -a toc -a toclevels=4 $(<F)
-
-# on Debian: this requires the full groof, not just groff-base.
-%.8.html: %.8
- man -Thtml $^ >$@
-
-htmlman: $(GROFF_HTML)
-
-
-MISDNVERSION=1_1_3
-MISDNUSERVERSION=1_1_3
-b410p:
- @if test "$(DOWNLOAD)" = ":" ; then \
- echo "**************************************************"; \
- echo "*** ***"; \
- echo "*** You must have either wget or fetch to be ***"; \
- echo "*** able to automatically download and install ***"; \
- echo "*** b410p support. ***"; \
- echo "*** ***"; \
- echo "*** Please install one of these. ***"; \
- echo "*** ***"; \
- echo "**************************************************"; \
- exit 1; \
- fi
- [ -f mISDN-$(MISDNVERSION).tar.gz ] || $(DOWNLOAD) http://downloads.digium.com/pub/zaptel/b410p/mISDN-$(MISDNVERSION).tar.gz
- tar -zxf mISDN-$(MISDNVERSION).tar.gz
- $(MAKE) -C mISDN-$(MISDNVERSION) install
- [ -f mISDNuser-$(MISDNUSERVERSION).tar.gz ] || $(DOWNLOAD) http://downloads.digium.com/pub/zaptel/b410p/mISDNuser-$(MISDNUSERVERSION).tar.gz
- tar -zxf mISDNuser-$(MISDNUSERVERSION).tar.gz
- $(MAKE) -C mISDNuser-$(MISDNUSERVERSION) install
-
-$(UTILS): %: %.o
- $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) $(LDLIBS)
-
-$(UTILSO): %.o: %.c
- $(CC) $(CFLAGS) -o $@ -c $<
install: all devices install-modules install-programs install-firmware
@echo "###################################################"
@@ -458,224 +135,26 @@
@echo "###"
@echo "###################################################"
-install-programs: install-utils install-libs install-include
-
-install-utils: utils install-utils-subdirs
-ifneq (,$(BINS))
- install -d $(DESTDIR)$(BIN_DIR)
- install $(BINS) $(DESTDIR)$(BIN_DIR)/
- install -d $(DESTDIR)$(MAN_DIR)
- install -m 644 $(MAN_PAGES) $(DESTDIR)$(MAN_DIR)/
-endif
-ifeq (,$(wildcard $(DESTDIR)$(CONFIG_FILE)))
- $(INSTALL) -D -m 644 zaptel.conf.sample $(DESTDIR)$(CONFIG_FILE)
-endif
-
-# Pushing those two to a separate target that is not used by default:
-install-modconf:
- build_tools/genmodconf $(BUILDVER) "$(ROOT_PREFIX)" "$(filter-out zaptel ztdummy xpp zttranscode ztdynamic,$(BUILD_MODULES)) $(MODULE_ALIASES)"
- @if [ -d /etc/modutils ]; then \
- /sbin/update-modules ; \
- fi
-
-install-firmware:
-ifeq ($(HOTPLUG_FIRMWARE),yes)
- $(MAKE) -C firmware hotplug-install DESTDIR=$(DESTDIR)
-endif
-
-install-libs: libs
- $(INSTALL) -D -m 755 $(LTZ_A) $(DESTDIR)$(LIB_DIR)/$(LTZ_A)
- $(INSTALL) -D -m 755 $(LTZ_SO) $(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER)
-ifeq (,$(DESTDIR))
- if [ `id -u` = 0 ]; then \
- /sbin/ldconfig || : ;\
- fi
-endif
- rm -f $(DESTDIR)$(LIB_DIR)$(LTZ_SO)
- $(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
- $(DESTDIR)$(LIB_DIR)/$(LTZ_SO).$(LTZ_SO_MAJOR_VER)
- $(LN) -sf $(LTZ_SO).$(LTZ_SO_MAJOR_VER).$(LTZ_SO_MINOR_VER) \
- $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
-ifneq (no,$(USE_SELINUX))
- ifeq (,$(DESTDIR))
- /sbin/restorecon -v $(DESTDIR)$(LIB_DIR)/$(LTZ_SO)
- endif
-endif
- $(INSTALL) -D -m 644 tonezone.h $(DESTDIR)$(INC_DIR)/tonezone.h
-
-install-utils-subdirs:
- @for dir in $(SUBDIRS_UTILS); do \
- $(MAKE) -C $$dir install; \
- done
-
-install-include:
- $(INSTALL) -D -m 644 kernel/zaptel.h $(DESTDIR)$(INC_DIR)/zaptel.h
-
-devices:
-ifndef DYNFS
- mkdir -p $(DESTDIR)/dev/zap
- rm -f $(DESTDIR)/dev/zap/ctl
- rm -f $(DESTDIR)/dev/zap/channel
- rm -f $(DESTDIR)/dev/zap/pseudo
- rm -f $(DESTDIR)/dev/zap/timer
- rm -f $(DESTDIR)/dev/zap/transcode
- rm -f $(DESTDIR)/dev/zap/253
- rm -f $(DESTDIR)/dev/zap/252
- rm -f $(DESTDIR)/dev/zap/251
- rm -f $(DESTDIR)/dev/zap/250
- mknod $(DESTDIR)/dev/zap/ctl c 196 0
- mknod $(DESTDIR)/dev/zap/transcode c 196 250
- mknod $(DESTDIR)/dev/zap/timer c 196 253
- mknod $(DESTDIR)/dev/zap/channel c 196 254
- mknod $(DESTDIR)/dev/zap/pseudo c 196 255
- N=1; \
- while [ $$N -lt 250 ]; do \
- rm -f $(DESTDIR)/dev/zap/$$N; \
- mknod $(DESTDIR)/dev/zap/$$N c 196 $$N; \
- N=$$[$$N+1]; \
- done
-else # DYNFS
- ifdef UDEVRULES
- install -d $(DESTDIR)/etc/udev/rules.d
- build_tools/genudevrules > $(DESTDIR)/etc/udev/rules.d/zaptel.rules
- else # !UDEVRULES
- @echo "**** Dynamic filesystem detected -- not creating device nodes"
- endif
-endif
-
-install-udev: devices
-
-uninstall-hotplug:
- $(MAKE) -C firmware hotplug-uninstall DESTDIR=$(DESTDIR)
-
BASENAMES=$(sort $(shell for x in $(ALL_MODULES); do basename $x; done))
uninstall-modules:
-ifeq ($(BUILDVER),linux24)
-else
- @./build_tools/uninstall-modules $(DESTDIR)/lib/modules/$(KVERS) $(BASENAMES)
- @for x in $(ALL_MODULES); do \
- rm -f $(DESTDIR)/lib/modules/$(KVERS)/extra/$$x ; \
- rm -f $(DESTDIR)/lib/modules/$(KVERS)/misc/$$x ; \
- rm -f $(DESTDIR)/lib/modules/$(KVERS)/zaptel/$$x ; \
- done;
-endif
BASENAMES=$(sort $(shell for mod in $(ALL_MODULES); do basename $$mod; done))
install-modules: $(INSTALL_MODULES) uninstall-modules
-ifeq ($(BUILDVER),linux24)
$(INSTALL) -d $(DESTDIR)$(MOD_DIR)
$(INSTALL) -m 644 $(INSTALL_MODULES) $(DESTDIR)$(MOD_DIR)
-else
- $(KMAKE_INST)
- ifneq (,$(wildcard datamods/syncppp.ko))
- $(MAKE) -C datamods install
- endif
-endif
[ `id -u` = 0 ] && /sbin/depmod -a $(KVERS) || :
-config:
-ifneq (,$(COPY_INITD))
- $(COPY_INITD)
-endif
-ifneq (,$(RCCONF_DIR))
- ifeq (,$(wildcard $(DESTDIR)$(RCCONF_DIR)/zaptel))
- $(INSTALL) -D -m 644 zaptel.sysconfig $(DESTDIR)$(RCCONF_DIR)/zaptel
- endif
-endif
-ifneq (,$(COPY_NETSCR))
- $(COPY_NETSCR)
-endif
-ifneq (,$(ADD_INITD))
- $(ADD_INITD)
-endif
- @echo "Zaptel has been configured."
- @echo ""
- @echo "If you have any zaptel hardware it is now recommended to "
- @echo "edit /etc/default/zaptel or /etc/sysconfig/zaptel and set there an "
- @echo "optimal value for the variable MODULES ."
- @echo ""
- @echo "I think that the zaptel hardware you have on your system is:"
- @kernel/xpp/utils/zaptel_hardware || true
-
-
-update:
- @if [ -d .svn ]; then \
- echo "Updating from Subversion..." ; \
- svn update | tee update.out; \
- rm -f .version; \
- if [ `grep -c ^C update.out` -gt 0 ]; then \
- echo ; echo "The following files have conflicts:" ; \
- grep ^C update.out | cut -b4- ; \
- fi ; \
- rm -f update.out; \
- else \
- echo "Not under version control"; \
- fi
-
clean:
- -@$(MAKE) -C menuselect clean
- rm -f torisatool makefw tor2fw.h radfw.h
- rm -f $(BINS)
- rm -f *.o ztcfg tzdriver sethdlc sethdlc-new
- rm -f $(LTZ_SO) $(LTZ_A) *.lo
-ifeq ($(BUILDVER),linux26)
- ifneq (,$(KSRC))
- $(KMAKE) clean
- endif
-else
+ rm -f makefw tor2fw.h radfw.h
+ rm -f *.o
$(MAKE) -C wct4xxp clean
-endif
- @for dir in $(SUBDIRS_UTILS_ALL); do \
- $(MAKE) -C $$dir clean; \
- done
- $(MAKE) -C firmware clean
rm -rf .tmp_versions
- rm -f gendigits tones.h
- rm -f libtonezone*
- rm -f fxotune
rm -f core
- rm -f ztcfg-shared fxstest
- rm -rf misdn*
- rm -rf mISDNuser*
- rm -rf README.html xpp/README.Astribank.html
distclean: dist-clean
dist-clean: clean
- @$(MAKE) -C menuselect dist-clean
- @$(MAKE) -C firmware dist-clean
- rm -f makeopts menuselect.makeopts menuselect-tree
- rm -f config.log config.status
-config.status: configure
- @CFLAGS="" ./configure
- @echo "****"
- @echo "**** The configure script was just executed, so 'make' needs to be"
- @echo "**** restarted."
- @echo "****"
- @exit 1
+.PHONY: menuselect distclean dist-clean clean all _all install modules config install-modules uninstall-modules
-menuselect.makeopts: menuselect/menuselect menuselect-tree
- @menuselect/menuselect --check-deps ${GLOBAL_MAKEOPTS} ${USER_MAKEOPTS} $@
-
-menuconfig: menuselect
-
-menuselect: menuselect/menuselect menuselect-tree
- - at menuselect/menuselect $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) menuselect.makeopts && echo "menuselect changes saved!" || echo "menuselect changes NOT saved!"
-
-menuselect/menuselect: menuselect/menuselect.c menuselect/menuselect_curses.c menuselect/menuselect_stub.c menuselect/menuselect.h menuselect/linkedlists.h config.status
- @CFLAGS="" $(MAKE) -C menuselect CC=$(HOSTCC)
-
-menuselect-tree: zaptel.xml firmware/firmware.xml
- @echo "Generating input for menuselect ..."
- @build_tools/make_tree > $@
-
-.EXPORT_ALL_VARIABLES:
-
-.PHONY: menuselect distclean dist-clean clean version.h all _all install b410p devices programs modules tests devel data stackcheck install-udev config update install-programs install-modules install-include install-libs install-utils-subdirs utils-subdirs uninstall-modules
-
-endif
-
-#end of: ifneq ($(KBUILD_EXTMOD),)
-endif
Modified: team/tzafrir/move/kernel/wct4xxp/Makefile
URL: http://svn.digium.com/view/zaptel/team/tzafrir/move/kernel/wct4xxp/Makefile?view=diff&rev=3769&r1=3768&r2=3769
==============================================================================
--- team/tzafrir/move/kernel/wct4xxp/Makefile (original)
+++ team/tzafrir/move/kernel/wct4xxp/Makefile Wed Jan 30 19:55:15 2008
@@ -5,6 +5,8 @@
include $(src)/Kbuild
else
+
+FIRM_DIR := ../../firmware
OCTASIC_OBJS:=$(shell ../oct612x/octasic-helper objects ../oct612x)
OCTASIC_CFLAGS:=$(shell ../oct612x/octasic-helper cflags ../oct612x) -Wno-undef
@@ -18,13 +20,13 @@
vpm450m.o: vpm450m.h ../oct612x/include/oct6100api/oct6100_api.h
-../firmware/zaptel-fw-oct6114-064.o: base.o
- $(MAKE) -C ../firmware zaptel-fw-oct6114-064.o
+$(FIRM_DIR)/zaptel-fw-oct6114-064.o: base.o
+ $(MAKE) -C $(FIRM_DIR) zaptel-fw-oct6114-064.o
-../firmware/zaptel-fw-oct6114-128.o: base.o
- $(MAKE) -C ../firmware zaptel-fw-oct6114-128.o
+$(FIRM_DIR)/zaptel-fw-oct6114-128.o: base.o
+ $(MAKE) -C $(FIRM_DIR) zaptel-fw-oct6114-128.o
-wct4xxp.o: base.o vpm450m.o $(OCTASIC_OBJS) ../firmware/zaptel-fw-oct6114-064.o ../firmware/zaptel-fw-oct6114-128.o
+wct4xxp.o: base.o vpm450m.o $(OCTASIC_OBJS) $(FIRM_DIR)/zaptel-fw-oct6114-064.o $(FIRM_DIR)/zaptel-fw-oct6114-128.o
$(LD) -r -o $@ $^
clean:
More information about the svn-commits
mailing list