[svn-commits] tzafrir: linux/trunk r4784 - /linux/trunk/drivers/dahdi/xpp/
SVN commits to the Digium repositories
svn-commits at lists.digium.com
Thu Aug 14 16:37:42 CDT 2008
Author: tzafrir
Date: Thu Aug 14 16:37:41 2008
New Revision: 4784
URL: http://svn.digium.com/view/dahdi?view=rev&rev=4784
Log:
Set xpp version to 6056 and reset XPP changelog.
Modified:
linux/trunk/drivers/dahdi/xpp/.version
linux/trunk/drivers/dahdi/xpp/Changelog_xpp
Modified: linux/trunk/drivers/dahdi/xpp/.version
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/.version?view=diff&rev=4784&r1=4783&r2=4784
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/.version (original)
+++ linux/trunk/drivers/dahdi/xpp/.version Thu Aug 14 16:37:41 2008
@@ -1,1 +1,1 @@
-trunk-r5744
+trunk-r6056
Modified: linux/trunk/drivers/dahdi/xpp/Changelog_xpp
URL: http://svn.digium.com/view/dahdi/linux/trunk/drivers/dahdi/xpp/Changelog_xpp?view=diff&rev=4784&r1=4783&r2=4784
==============================================================================
--- linux/trunk/drivers/dahdi/xpp/Changelog_xpp (original)
+++ linux/trunk/drivers/dahdi/xpp/Changelog_xpp Thu Aug 14 16:37:41 2008
@@ -1,317 +1,2 @@
-Tue, 13 May 2008 Oron Peled <oron at actcom.co.il> - xpp.r5744
- * New firmware protocol version: 30
- * New numbers for the device types: (e.g. in card_init* scripts)
- - FXS: 1 (was: 3)
- - FXO: 2 (was: 4)
- - BRI: 3 (was: 6 for TE, 7 for NT)
- - PRI: 4 (was: 9)
- * Init scripts of FXS and FXO modules are now written in Perl as well
- (be sure to have File::Basename, e.g: perl-modules in Debian).
- * calibrate_slics merged into init_card_1_30 .
- * Each of the init_card_* scripts now runs no more than once per card even
- if this card represents several XPD's (e.g: quad PRI, BRI). This means
- maximum of 4 script runs per Astribank.
- * Zaptel registration now briefly flash all LED's (not just the green ones as
- before).
- * Module parameter print_dbg was renamed to debug for consistency with
- the rest of zaptel.
- * init_fxo_modes removed: content moved into init_card_2_30, verified
- at build time.
- * FXO: removed polling for power-denial. New firmware notifies us.
- * Code tested with sparse. Most warnings were fixed.
- * Set ZT_SIG_DACS for the bchans in the PRI and BRI modules to not get
- ignored by ztscan.
- * fpga_load: Handle null config_desc we get from some crazy USB controllers.
- * genzaptelconf: Fix reporting of empty slots in list mode.
- * xpp_blink can now blink the led of a single analog port.
- * "slics" has been renamed "chipregs".
- * Fixed a small typo in fpga_load(8).
- * Fixed bashism in xpp_fxloader.
-
-Thu, 20 Mar 2008 Oron Peled <oron at actcom.co.il> - xpp.r5566
- * Build:
- - Zaptel >= 1.4.9 is migrating to storing kernel stuff in zaptel/kernel/*
- - We conditionally use old/new directory scheme:
- In xpp/Kbuild and xpp/utils/Makefile use ZAP_KERNEL variable, so it's
- not confused with ZAPTEL_DIR (which appears in zaptel/Makefile as well).
- - Fix compile warnings on 64 bit systems.
- - Compile fixes for kernel-2.6.24
- * UDEV:
- - /etc/udev/rules.d/xpp.rules now uses XPP_INIT_DIR to find astribank_hook.
- - astribank_hook: Modify to do nothing. Add some documentation.
- * Autoconfiguration -- zapconf:
- - Don't fail zapconf et.al. if no config file was found.
- - Skip the 'IRQ Missing:' line in /proc/zaptel/nnn for wcte1xp(?).
- - Add some newer Digium cards to our hardware inventory.
- - Partially handle cases where the /proc/zaptel strings does not contain
- info about E1/T1/J1 or NT/TE.
- * Better SYNC:
- - Finer tuning of PLL (New firmware).
- - Change calculation algorithm of sync offset. It now copes better
- with the variance in USB frame reception timing.
- - Statistics:
- . The view of results was moved from /proc/xpp/XBUS-*/summary to
- a new /sys/bus/astribanks/devices/xbus-*/timing and enhanced.
- . A new xpp_timing script shows all astribanks.
- . A new write only /sys/bus/astribanks/devices/xbus-*/cls is
- used to clear statistics. Eventually, clearing of XBUS related
- statistics should be done here. One that was migrated is the
- clearing of 'PCM [TR]X:' numbers currently appearing in
- /proc/xpp/XBUS-*/summary (they should be moved too later).
- - Shorten the strings representation sync_mode ("SYNC_MODE_AB" -> "AB")
- adapted their use in printk and /proc so the text is clear.
- - Added a command line parameter xpp.disable_pll_sync to stop all
- adjustments command to AB (calculations still continue as usual).
- * PRI:
- - 4 port support
- - set clocking master span via ztcfg, like other zaptel devices.
- * FXO:
- - Fix false hangups in some countries (voltage fluctuations).
- - Some countries send caller-id before first ring.
- Added code to handle caller-id PCM pass through according to
- a new command line parameter (xpd_fxo.caller_id_style).
- - No longer sends an event on zt_open. See #12160 .
- * FXS: Re-enable dtmf_detection.
- * Misc:
- - Adapt to zaptel-1.4.8 and above ztscan: added fields returend by
- new ZT_SPANSTAT_V2 ioctl()
- - Document sysfs and waitfor_xpds.
- - Miscelaneous optimizations and bugfixes.
- - Remove deprecated pcm_tasklet parameter. The rx_tasklet parameter has
- replaced it a long time ago.
- - Add RX_CMD counter to /proc/xpp/XBUS-*/summary
- - Unclutter some of the usb disconnect messages.
- - xpp_usb: minor preformance improvements in receive.
- Expose the number of pending receive URB's in /proc/xpp/XBUS-*/xpp_usb
-Thu Jan 10 2008 Oron Peled <oron.peled at xorcom.com> - xpp.r5254
- * Improved polarity reversal hangups in FXO (r5194).
- Fixed false detection of polarity reversals.
- * Optimize xframe allocation, by not zeroing the whole
- memory (in get_xframe()).
- * Fixed erronous error message that appeared sometimes
- from fpga_load during USB renumeration.
- * Zaptel::Chans now provides battery() reporting for some FXO
- channels (Astribank FXO and wcfxo).
-
-Tue Dec 25 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r5179
- * xpd_pri: Basically ready.
- * PCM synchronization changes:
- - Each Astribank unit ticks independently. Each with its own PLL.
- - HOST synchronization is gone. Loading of xpp will no longer cause
- useless 250 ticks per second if you have no Astribank.
- - Synchronization from the zaptel sync master requires setting
- ZAPTEL as sync source (xpp_sync ZAPTEL).
- * rx_tasklet is now a parameter of the module xpp, rather than of xpp_usb.
- * New FPGA firmware: 5128 (1151) / 5122 (1141, 1131):
- - Fixes synchronization issues.
- - PRI module: E1/T1 should now work.
- * perl module and utilities:
- - Modules no longer magically scan system on initialization.
- - Scanning is by calling explicit methods.
- - "Serial" has been renamed "Label". It is basically unique, but
- should be modifieble.
- - Some basic documentation of zaptel perl modules.
- * Default sort order of zt_registration is back to SORT_CONNCTOR.
- * zt_registration proc file now shows the number of span registered to
- if registered. Try: grep . /proc/xpp/XBUS-*/XPD-*/zt_registration
- * genzaptelconf: Allow using a custom command instead of
- /etc/init.d/asterisk to start/stop asterisk.
- * Fixed the typo "Slagish".
-
-Wed Nov 14 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r5010
- * Fix a deadlock spotted on some SMP installations.
- * increase FXS ring detect debounce interval.
- * Improve (reduce) signal attenuation on FXO ports.
- * zaptel-perl: further fixes to handling of empty slots.
-
-Wed Oct 3 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r4900
- * Zaptel/Hardware perl modules:
- - Use sysfs directly. Don't rely on lspci/lsusb.
- - Each device has a description and driver name.
- - Zaptel::Hardware::drivers() to show the list of required drivers
- for this system (see zaptel_drivers).
- - zaptel_hardware shows a description and a (suggested?) driver.
- * zt_registration sorts by Serial first and only then by connector.
- * USB_FW.hex replaces all the USB_11x0.hex .
- - Separate USB interface for the management processor.
- - Hence fpga_load can now work even with drivers loaded.
- * Fix firmware upgrading.
- * Fix manual firmware loading while auto-loading.
- * Fix opermode parameter for FXO initialization (broken in r4648).
-
-Wed Oct 3 2007 Oron Peled <oron at actcom.co.il> - xpp.r4786
- * New firmware protocol version: 2.9 .
- * fpga_load: initial clean-ups before interface split.
- * genzaptelconf: Don't leave an empty directory behind (4784)
- * Increase xpp poll_timeout to 1000ms - useful for CentOS 4 (r4781).
- * Fix initialization anoyance: if AB don't answer to polls, don't
- waitfor_xpds, and show no waiting XPDs (r4725).
- * Disable dtmf_detection by default once again (r4712).
- * Don't check twice for asterisk to stop. The second test was done
- while Asterisk was still stopping (r4708).
- * Support building the kernel with M= instead of with SUBDIRS= , as
- used in some newer build systems (r4677).
-
-Tue Sep 11 2007 Oron Peled <oron at actcom.co.il> - xpp.r4648
- * New firmware protocol version: 2.8 .
- * Cleanup INFO() messages during module loading.
-
- * USB: Receive queue with TASKLETS [r4600]. Controlled by rx_tasklet
- parameter to xpp_usb module (can be changed in runtime).
- * The pcm_tasklet parameter in xpp module is deprecated:
- - Does not actually do anything.
- - If set during module loading, shows an ERR() message.
- - Also appears in /proc/xpp/sync
-
- * FXS: Hardware DTMF detection by default, can be disabled
- by setting dtmf_detection=0 parameter to xpd_fxs.
- PCM is muted when DTMF key is pressed.
-
- * zapconf:
- - Can now generate users.conf compatible with asterisk-gui.
- - Optional command-line arguments denoting which files to generate.
- Possible values are 'zaptel', 'zapata' and 'users'.
- - Defaults to creating zaptel and zapata.
-
- * Update to zaptel-1.4.5.1, zaptel-1.2.20.1
- * Fix building on kernel 2.6.23rc1, from Axel Thimm.
- * New firmware to fix FXS leds irregularities.
- * Less noise at build time - don't echo version, test compile ony once.
- * zapconf can generate users.conf snippets.
-
-Thu Aug 16 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r4515
- * Don't use Astribanks connected to USB1 interfaces
- Unless the user set the option usb1=1 for xpp_usb (r4504).
- * README.Astribank can now be generated from the makefile (r4503).
- * Demote the messages about PCM in non-PCM from notice to debug (r4501).
- * Fix sample BRI zapata.conf: NT instead of TE (r4498).
- * Disable FXS hardware DTMF detection by default (r4492).
- * Extra Zaptel PCI IDs (from Philipp Kempgen) (r4466).
-
-Thu Aug 2 2007 Oron Peled <oron at actcom.co.il> - xpp.r4464
- * Jump to zaptel-1.2.19 and zaptel-1.4.4 (with/without bristuff)
- * BRI improvement: an 'nt_keepalive' parameter to xpd_bri forces
- a BRI_NT to retry a connection indefinitely (this is our default).
- When false it revert to the behaviour in changeset:4415 ("Bezeq like")
- * Improvement in DBG macros. The print_dbg parameter is now set of
- flags to debug. They are defined in zap_debug.h
- * PRI configuration improvements (r4462):
- - Hardcoded default (in init_card_9_26) is TE.
- - The variable XPP_PRI_SETUP (in /etc/default/zaptel) may config
- all PRI ports or some of them as we wish. Full docs are in
- the utils/example_default_zaptel.
- * PRI D-channel indication: Similar to BRI (r4464).
-
-Thu Jul 30 2007 Oron Peled <oron at actcom.co.il> - xpp.r4415
- * Show Astribank 6+2 as 6/2 channels and not 8/8 channels.
- - Added as a "subtype" to the device type (r4391).
- * Fixed a panic in BRI span shutdown method (r4393).
- * Changes to debug macros.
- * Add proper sysfs support (r4406)
- - A bus on whuch all of the Astribanks reside.
- - Replaces useless sysfs code that existed in the module.
- - Currently used to set the sync source automatically at device
- adition / removal.
- * BRI: We do need the T1 timer in NT. If it gets into G2 state (rr4407).
-
-Thu Jul 12 2007 Oron Peled <oron at actcom.co.il> - xpp.r4372
- * Update to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward)
- * Fix a critical race with zaptel synchronization (r4362)
- * Added a /proc/xpp/cmds for statistics about command timing (r4360)
- * Fix a digit mapping bug with hardware dtmf detection (r4357)
- * In xpp/utils/Makefile add perl syntax checks to our scripts (r4337)
- * Better USB data error checking (r4336)
- * udev rules (xpp.rules) avoid false calls from wrong nodes (r4331)
- * Improve hardware detection and reporting in lszaptel,
- zaptel_hardware. zapconf is basically functional.
- * Leds are blinked synchronously on all Astribanks now (r4262)
- * Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled into zaptel (r4258)
- (This feature was not yet accepted into official zaptel)
- * Removed compile warning about HZ != 1000 (r4218)
- * Firmware updates.
- * xpd_pri: the PRI module
- * fpga_load now supports USB pathes without zeros (r4211)
- * XPD numbers have changed to '<Unit><Subunit>' (r4196)
- * Proper support for ZT_VMWI ioctl, if used in zaptel (r4092)
- * Fix FXO power denial detection (r4054)
- * FXO could accidentally go off-hook with some compilers (r4048)
-
-Tue May 1 2007 Oron Peled <oron at actcom.co.il> - xpp.r3898
- * Tested with zaptel-1.2.17.1
- * Add D-Channel TX, RX and BAD frames count in /proc/xpp/XBUS-*/XPD-*/bri_info
- * Adjust output of xpp_sync script. Pad for 8 port BRI.
- * Added a debugging module parport_debug (not compiled by default).
- * Added an optional patch to zaptel:
- - compiles only if ZAPTEL_SYNC_TICK is defined
- - Allow interested driver to register for "sync" notification.
- - Does not affect drivers that do not use this feature.
- * Added external synchronization feature:
- - Only if ZAPTEL_SYNC_TICK feature is compiled in
- - Than XPP may be synchronized by another card (e.g: an Astribank
- with FXS can be synchronized by a Digium PRI card).
- - May be enabled/disabled in runtime via the 'sync_tick_active' module
- parameter to the xpp.ko module.
- * Fixed a potential bug in D-Channel hexdump printing.
- * New visual indications in BRI leds:
- - Constant ON RED/GREEN: Shows the port type -- NT/TE.
- - Very fast "double blink": Layer1 work, no D-Channel yet.
- - Steady blinking (1/2 sec): D-Channel trafic detected.
- * xpp_fxloader moved to /usr/share/zaptel .
- * adj_clock removed: never really used.
-
-Thu, 19 Apr 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r3814
- * No need for extra patch beyond bristuff for Astribank BRI.
- * Protocol no. 2.6: syncing improvements.
- * Default poll intervals changed: 500 in BRI and FXO.
- * Allow changing FXS polls interval at run time.
- * BRI initalization fixed on SUSE (path to logger).
- * When using the SUSE zaptel rpm package, set modules_var=ZAPTEL_MODULES in
- /etc/sysconfig/zaptel .
- * zt_registration not verbose by default.
- * xpp_sync warns if FXO is sync slave.
- * Extra PCM metrics data in /proc/xpp/XBUS-NN/summary .
- * Extra USB metrics data in /proc/xpp/XBUS-NN/usb_info .
-
-Wed, 11 Apr 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r3768
- * Removed "go away" notice and solved sync of a restarted device.
- * Resetting firmware: rmmod xpp_usb; /etc/hotplug/usb/xpp_fxloader reset
- * Perl modules use strict.
- * genzaptelconf -F will not generate zapata configuration for NT spans.
- * genzaptelconf uses perl utilities to start.
- * Initial support for 2nd XHFC (BRI) chip.
-
-Sun, 1 Apr 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r3712
- * New protocol version (2.5).
- * Luckily firmware unloading now works.
- * Solves "multiple ticks" bug. No need for pcm_tasklets workaround.
- * genzaptelconf -z will generate zapscan.conf for the asterisk-gui.
- * Fixed hardware detection for the BRI.
-
-Wed, 14 Mar 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r3608
- * Initial verssion of firmware unloading.
- * PCM bugfixes.
- * Defaults of kernel parameters are now part of parameter description.
- * Removed zaptel sync code for now.
- * genzaptelconf will detect vzaphfc.
- * genzaptelconf defaults to ptmp for BRI.
- * Documentation updates.
-
-Mon, 26 Feb 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r3517
- * genzaptelconf now uses ls for FXS lines by default .
- * World-readable kernel parameters.
-
-Thu, 22 Feb 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r3440
- * /proc/xpp/sync: 'm 0' is, while depracated, can still be used.
- * New firmware with PCM improvements.
- * Improvements to the xpp helper scripts.
- * Bug fixes.
- * zaptel/perl is now installed by xpp/utils/Makefile.
-
-Wed, 14 Feb 2007 Tzafrir Cohen <tzafrir.cohen at xorcom.com> - xpp.r3365
- * Kewlstart support on the FXS ports (already existed on the FXO ports).
- * The format of /proc/xpp/sync has changed (still self-documented).
- * Better notification of FXS lines that were off-hook on registration time.
- * Parallel polling of Astribanks (faster startup when there are multiple
- devices)
- * zconf: scripts and perl modules to automate the work with Zaptel and the
- Astribank. Current scripts: zt_registration, xpp_sync.
+Thu, Aug 14 2008 Oron Peled <oron at actcom.co.il> - xpp.r6056
+ * First DAHDI-linux release.
More information about the svn-commits
mailing list