[svn-commits] jdixon: branch 1.4 r2807 - /branches/1.4/pciradio.c

[SVN commits to the Digium repositories]

Author: jdixon
Date: Tue Jul 31 19:15:57 2007
New Revision: 2807

URL: http://svn.digium.com/view/zaptel?view=rev&rev=2807
Log:
Merged back in some changes I wasnt aware of

Modified:
    branches/1.4/pciradio.c

Modified: branches/1.4/pciradio.c
URL: http://svn.digium.com/view/zaptel/branches/1.4/pciradio.c?view=diff&rev=2807&r1=2806&r2=2807
==============================================================================
--- branches/1.4/pciradio.c (original)
+++ branches/1.4/pciradio.c Tue Jul 31 19:15:57 2007
@@ -2,11 +2,11 @@
  * PCI RADIO Card  Zapata Telephony PCI Quad Radio Interface driver
  *
  * Written by Jim Dixon <jim at lambdatel.com>
- * Based on previous work by Mark Spencer <markster at linux-support.net>
+ * Based on previous work by Mark Spencer <markster at digium.com>
  * Based on previous works, designs, and archetectures conceived and
  * written by Jim Dixon <jim at lambdatel.com>.
  *
- * Copyright (C) 2001-2004 Jim Dixon / Zapata Telephony.
+ * Copyright (C) 2001-2007 Jim Dixon / Zapata Telephony.
  *
  * All rights reserved.
  *
@@ -56,7 +56,11 @@
 #ifdef STANDALONE_ZAPATA
 #include "zaptel.h"
 #else
-#include <linux/zaptel.h>
+#include <zaptel/zaptel.h>
+#endif
+
+#ifdef LINUX26
+#include <linux/moduleparam.h>
 #endif
 
 #define RAD_MAX_IFACES 128
@@ -170,8 +174,8 @@
 	volatile unsigned long ioaddr;
 	dma_addr_t 	readdma;
 	dma_addr_t	writedma;
-	volatile int *writechunk;	/* Double-word aligned write memory */
-	volatile int *readchunk;	/* Double-word aligned read memory */
+	volatile unsigned int *writechunk;	/* Double-word aligned write memory */
+	volatile unsigned int *readchunk;	/* Double-word aligned read memory */
 	unsigned char saudio_status[NUM_CHANS];
 	char gotcor[NUM_CHANS];
 	char gotct[NUM_CHANS];
@@ -555,7 +559,7 @@
 static void _do_encdec(struct pciradio *rad)
 {
 int	i,n;
-unsigned char byte1,byte2;
+unsigned char byte1 = 0,byte2 = 0;
 
 	/* return doing nothing if busy */
 	if ((rad->encdec.lastcmd + 2) > jiffies) return;
@@ -729,11 +733,15 @@
 static void pciradio_reset_serial(struct pciradio *rad);
 static void pciradio_restart_dma(struct pciradio *rad);
 
+#ifdef	LEAVE_THIS_COMMENTED_OUT
 #ifdef LINUX26
 static irqreturn_t pciradio_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #else
 static void pciradio_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #endif
+#endif
+
+ZAP_IRQ_HANDLER(pciradio_interrupt)
 {
 	struct pciradio *rad = dev_id;
 	unsigned char ints,byte1,byte2,gotcor,gotctcss,gotslowctcss,ctcss;
@@ -1332,7 +1340,7 @@
 				if ((rad->rxindex < stack.p.data) &&
 				  (rad->srxtimer < SRX_TIMEOUT) &&
 				    ((rad->remmode[chan->chanpos - 1] == ZT_RADPAR_REM_SERIAL) ||
-					(!strchr(rad->rxbuf,'\r'))))
+					(!strchr((char *)rad->rxbuf,'\r'))))
 				{
 					spin_unlock_irqrestore(&rad->lock,flags);
 					interruptible_sleep_on_timeout(&mywait,2);
@@ -1752,7 +1760,7 @@
 
 			/* Allocate enough memory for two zt chunks, receive and transmit.  Each sample uses
 			   32 bits.  Allocate an extra set just for control too */
-			rad->writechunk = (int *)pci_alloc_consistent(pdev, ZT_MAX_CHUNKSIZE * 2 * 2 * 2 * 4, &rad->writedma);
+			rad->writechunk = pci_alloc_consistent(pdev, ZT_MAX_CHUNKSIZE * 2 * 2 * 2 * 4, &rad->writedma);
 			if (!rad->writechunk) {
 				printk("pciradio: Unable to allocate DMA-able memory\n");
 				if (rad->freeregion)
@@ -1807,7 +1815,7 @@
 
 			}
 
-			if (request_irq(pdev->irq, pciradio_interrupt, SA_SHIRQ, "pciradio", rad)) {
+			if (request_irq(pdev->irq, pciradio_interrupt, ZAP_IRQ_SHARED, "pciradio", rad)) {
 				printk("pciradio: Unable to request IRQ %d\n", pdev->irq);
 				if (rad->freeregion)
 					release_region(rad->ioaddr, 0xff);