[svn-commits] kpfleming: branch mogorman/zaptel-1.2-transcoder
r1990 - in /team/mogorman/za...
svn-commits at lists.digium.com
svn-commits at lists.digium.com
Sat Jan 27 09:20:42 MST 2007
Author: kpfleming
Date: Sat Jan 27 10:20:41 2007
New Revision: 1990
URL: http://svn.digium.com/view/zaptel?view=rev&rev=1990
Log:
Merged revisions 1953,1962-1963,1966,1978,1981,1987 via svnmerge from
https://origsvn.digium.com/svn/zaptel/branches/1.2
........
r1953 | kpfleming | 2007-01-24 07:01:36 -0600 (Wed, 24 Jan 2007) | 2 lines
might as well fix this driver too :-)
........
r1962 | tzafrir | 2007-01-25 00:45:00 -0600 (Thu, 25 Jan 2007) | 5 lines
xproto old code cleanup:
- Remove old SOFT_SIMULATOR (not used in the last year ;-)
- As a result can merge packet_receive() and packet_process()
- Remove unused macro (MAX_XPACKET_DATALEN) from xproto.h
........
r1963 | tzafrir | 2007-01-25 00:47:12 -0600 (Thu, 25 Jan 2007) | 2 lines
Remove confusing print of ZT_FLAG_RUNNING .
........
r1966 | tzafrir | 2007-01-25 04:48:33 -0600 (Thu, 25 Jan 2007) | 16 lines
* Xbus protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3).
XPS Init scripts renamed accordingly.
* Performance improvements for multi-XPD (span) devices.
* Astribank BRI driver (in next commit).
* Changes under /proc:
- XBUS and XPD numbers have two digits.
- Every script wildcard should be replaced from XBUS-? to XBUS-[0-9]*
- Added /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop.
* Several countries (South Africa, UAE, anybody else) require a shorter
ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011.
* Use tasklets to move most of the interrupt PCM copying out of the interrupt.
* Debugfs-based code to dump data to userspace (used to debug BRI D channel).
* Pretend every 2.6.9 actually has later RHEL's typedefs.
* fpga_load supports /dev/bus/usb .
* Fixed physical order sorting in genzaptelconf.
........
r1978 | mattf | 2007-01-25 17:12:27 -0600 (Thu, 25 Jan 2007) | 2 lines
Add support for additional product.
........
r1981 | mattf | 2007-01-26 09:26:52 -0600 (Fri, 26 Jan 2007) | 2 lines
Fix driver table entry name to original.
........
r1987 | kpfleming | 2007-01-27 10:14:54 -0600 (Sat, 27 Jan 2007) | 2 lines
properly reference the size symbol produced by objcopy
........
Added:
team/mogorman/zaptel-1.2-transcoder/xpp/firmwares/FPGA_1141.hex
- copied unchanged from r1987, branches/1.2/xpp/firmwares/FPGA_1141.hex
team/mogorman/zaptel-1.2-transcoder/xpp/firmwares/USB_1140.hex
- copied unchanged from r1987, branches/1.2/xpp/firmwares/USB_1140.hex
team/mogorman/zaptel-1.2-transcoder/xpp/init_card_3_24
- copied unchanged from r1987, branches/1.2/xpp/init_card_3_24
team/mogorman/zaptel-1.2-transcoder/xpp/init_card_4_24
- copied unchanged from r1987, branches/1.2/xpp/init_card_4_24
team/mogorman/zaptel-1.2-transcoder/xpp/init_card_6_24
- copied unchanged from r1987, branches/1.2/xpp/init_card_6_24
team/mogorman/zaptel-1.2-transcoder/xpp/init_card_7_24
- copied unchanged from r1987, branches/1.2/xpp/init_card_7_24
team/mogorman/zaptel-1.2-transcoder/xpp/xpp_log.h
- copied unchanged from r1987, branches/1.2/xpp/xpp_log.h
Removed:
team/mogorman/zaptel-1.2-transcoder/xpp/init_card_3_23
team/mogorman/zaptel-1.2-transcoder/xpp/init_card_4_23
Modified:
team/mogorman/zaptel-1.2-transcoder/ (props changed)
team/mogorman/zaptel-1.2-transcoder/wcfxo.c
team/mogorman/zaptel-1.2-transcoder/wct4xxp/base.c
team/mogorman/zaptel-1.2-transcoder/wctdm24xxp.c
team/mogorman/zaptel-1.2-transcoder/xpp/Makefile
team/mogorman/zaptel-1.2-transcoder/xpp/README.Astribank
team/mogorman/zaptel-1.2-transcoder/xpp/card_fxo.c
team/mogorman/zaptel-1.2-transcoder/xpp/card_fxs.c
team/mogorman/zaptel-1.2-transcoder/xpp/card_global.c
team/mogorman/zaptel-1.2-transcoder/xpp/firmwares/FPGA_1151.hex
team/mogorman/zaptel-1.2-transcoder/xpp/firmwares/FPGA_FXS.hex (contents, props changed)
team/mogorman/zaptel-1.2-transcoder/xpp/utils/Makefile
team/mogorman/zaptel-1.2-transcoder/xpp/utils/fpga_load.8
team/mogorman/zaptel-1.2-transcoder/xpp/utils/fpga_load.c
team/mogorman/zaptel-1.2-transcoder/xpp/utils/genzaptelconf
team/mogorman/zaptel-1.2-transcoder/xpp/utils/xpp_fxloader
team/mogorman/zaptel-1.2-transcoder/xpp/xbus-core.c
team/mogorman/zaptel-1.2-transcoder/xpp/xbus-core.h
team/mogorman/zaptel-1.2-transcoder/xpp/xdefs.h
team/mogorman/zaptel-1.2-transcoder/xpp/xpd.h
team/mogorman/zaptel-1.2-transcoder/xpp/xpp_usb.c
team/mogorman/zaptel-1.2-transcoder/xpp/xpp_zap.c
team/mogorman/zaptel-1.2-transcoder/xpp/xpp_zap.h
team/mogorman/zaptel-1.2-transcoder/xpp/xproto.c
team/mogorman/zaptel-1.2-transcoder/xpp/xproto.h
team/mogorman/zaptel-1.2-transcoder/xpp/zap_debug.c
team/mogorman/zaptel-1.2-transcoder/xpp/zap_debug.h
Propchange: team/mogorman/zaptel-1.2-transcoder/
------------------------------------------------------------------------------
--- svnmerge-integrated (original)
+++ svnmerge-integrated Sat Jan 27 10:20:41 2007
@@ -1,1 +1,1 @@
-/branches/1.2:1-1951
+/branches/1.2:1-1989
Modified: team/mogorman/zaptel-1.2-transcoder/wcfxo.c
URL: http://svn.digium.com/view/zaptel/team/mogorman/zaptel-1.2-transcoder/wcfxo.c?view=diff&rev=1990&r1=1989&r2=1990
==============================================================================
--- team/mogorman/zaptel-1.2-transcoder/wcfxo.c (original)
+++ team/mogorman/zaptel-1.2-transcoder/wcfxo.c Sat Jan 27 10:20:41 2007
@@ -407,7 +407,6 @@
#endif
ints = inb(wc->ioaddr + WC_INTSTAT);
- outb(ints, wc->ioaddr + WC_INTSTAT);
if (!ints)
@@ -416,6 +415,8 @@
#else
return;
#endif
+
+ outb(ints, wc->ioaddr + WC_INTSTAT);
if (ints & 0x0c) { /* if there is a rx interrupt pending */
#ifdef ENABLE_TASKLETS
Modified: team/mogorman/zaptel-1.2-transcoder/wct4xxp/base.c
URL: http://svn.digium.com/view/zaptel/team/mogorman/zaptel-1.2-transcoder/wct4xxp/base.c?view=diff&rev=1990&r1=1989&r2=1990
==============================================================================
--- team/mogorman/zaptel-1.2-transcoder/wct4xxp/base.c (original)
+++ team/mogorman/zaptel-1.2-transcoder/wct4xxp/base.c Sat Jan 27 10:20:41 2007
@@ -2679,8 +2679,8 @@
struct firmware embedded_firmware;
const struct firmware *firmware = &embedded_firmware;
#if !defined(HOTPLUG_FIRMWARE)
- extern const u32 _binary_OCT6114_64D_ima_size;
- extern const u32 _binary_OCT6114_128D_ima_size;
+ extern const u32 *_binary_OCT6114_64D_ima_size;
+ extern const u32 *_binary_OCT6114_128D_ima_size;
extern u8 _binary_OCT6114_64D_ima_start[];
extern u8 _binary_OCT6114_128D_ima_start[];
#endif
@@ -2719,7 +2719,7 @@
}
#else
embedded_firmware.data = _binary_OCT6114_64D_ima_start;
- embedded_firmware.size = _binary_OCT6114_64D_ima_size;
+ embedded_firmware.size = *_binary_OCT6114_64D_ima_size;
#endif
break;
case 128:
@@ -2731,7 +2731,7 @@
}
#else
embedded_firmware.data = _binary_OCT6114_128D_ima_start;
- embedded_firmware.size = _binary_OCT6114_128D_ima_size;
+ embedded_firmware.size = *_binary_OCT6114_128D_ima_size;
#endif
break;
default:
Modified: team/mogorman/zaptel-1.2-transcoder/wctdm24xxp.c
URL: http://svn.digium.com/view/zaptel/team/mogorman/zaptel-1.2-transcoder/wctdm24xxp.c?view=diff&rev=1990&r1=1989&r2=1990
==============================================================================
--- team/mogorman/zaptel-1.2-transcoder/wctdm24xxp.c (original)
+++ team/mogorman/zaptel-1.2-transcoder/wctdm24xxp.c Sat Jan 27 10:20:41 2007
@@ -2,6 +2,7 @@
* Wilcard TDM2400P TDM FXS/FXO Interface Driver for Zapata Telephony interface
*
* Written by Mark Spencer <markster at digium.com>
+ * Further modified to add support for the TDM800P by Matthew Fredrickson <creslin at digium.com>
*
* Copyright (C) 2005, 2006, Digium, Inc.
*
@@ -289,9 +290,9 @@
#define CMD_WR(a,b) (((a) << 8) | (b) | __CMD_WR)
#define CMD_RD(a) (((a) << 8) | __CMD_RD)
-#define CMD_BYTE(card,bit) (((((card) & 0x3) * 3 + (bit)) * 7) \
- + ((card) >> 2))
-
+
+#define CMD_BYTE(card,bit,altcs) (((((card) & 0x3) * 3 + (bit)) * 7) \
+ + ((card) >> 2) + (altcs) + ((altcs) ? -21 : 0))
struct calregs {
unsigned char vals[NUM_CAL_REGS];
@@ -326,6 +327,7 @@
unsigned char ctlreg;
int cards;
int cardflag; /* Bit-map of present cards */
+ int altcs[NUM_CARDS + NUM_EC];
spinlock_t reglock;
wait_queue_head_t regq;
/* FXO Stuff */
@@ -358,6 +360,7 @@
int modtype[NUM_CARDS + NUM_EC];
/* Set hook */
int sethook[NUM_CARDS + NUM_EC];
+ int type;
#ifdef VPM_SUPPORT
int vpm;
@@ -385,9 +388,11 @@
struct wctdm_desc {
char *name;
int flags;
+ int ports;
};
-static struct wctdm_desc wctdm = { "Wildcard TDM2400P", 0 };
+static struct wctdm_desc wctdm2400 = { "Wildcard TDM2400P", 0, 24 };
+static struct wctdm_desc wctdm800 = { "Wildcard TDM800P", 0, 8 };
static int acim2tiss[16] = { 0x0, 0x1, 0x4, 0x5, 0x7, 0x0, 0x0, 0x6, 0x0, 0x0, 0x0, 0x2, 0x0, 0x3 };
static struct wctdm *ifaces[WC_MAX_IFACES];
@@ -443,6 +448,7 @@
unsigned long flags;
unsigned int curcmd=0;
int x;
+ int subaddr = card & 0x3;
#ifdef FANCY_ECHOCAN
int ecval;
ecval = wc->echocanpos;
@@ -450,6 +456,9 @@
ecval = ecval % EC_SIZE;
#endif
+ if (wc->altcs[card])
+ subaddr = 0;
+
/* Skip audio */
writechunk += 24;
spin_lock_irqsave(&wc->reglock, flags);
@@ -485,43 +494,43 @@
}
}
if (wc->modtype[card] == MOD_TYPE_FXS) {
- writechunk[CMD_BYTE(card, 0)] = (1 << (card & 0x3));
+ writechunk[CMD_BYTE(card, 0, wc->altcs[card])] = (1 << (subaddr));
if (curcmd & __CMD_WR)
- writechunk[CMD_BYTE(card, 1)] = (curcmd >> 8) & 0x7f;
+ writechunk[CMD_BYTE(card, 1, wc->altcs[card])] = (curcmd >> 8) & 0x7f;
else
- writechunk[CMD_BYTE(card, 1)] = 0x80 | ((curcmd >> 8) & 0x7f);
- writechunk[CMD_BYTE(card, 2)] = curcmd & 0xff;
+ writechunk[CMD_BYTE(card, 1, wc->altcs[card])] = 0x80 | ((curcmd >> 8) & 0x7f);
+ writechunk[CMD_BYTE(card, 2, wc->altcs[card])] = curcmd & 0xff;
} else if (wc->modtype[card] == MOD_TYPE_FXO) {
if (curcmd & __CMD_WR)
- writechunk[CMD_BYTE(card, 0)] = 0x20 | fxo_addrs[card & 0x3];
+ writechunk[CMD_BYTE(card, 0, wc->altcs[card])] = 0x20 | fxo_addrs[subaddr];
else
- writechunk[CMD_BYTE(card, 0)] = 0x60 | fxo_addrs[card & 0x3];
- writechunk[CMD_BYTE(card, 1)] = (curcmd >> 8) & 0xff;
- writechunk[CMD_BYTE(card, 2)] = curcmd & 0xff;
+ writechunk[CMD_BYTE(card, 0, wc->altcs[card])] = 0x60 | fxo_addrs[subaddr];
+ writechunk[CMD_BYTE(card, 1, wc->altcs[card])] = (curcmd >> 8) & 0xff;
+ writechunk[CMD_BYTE(card, 2, wc->altcs[card])] = curcmd & 0xff;
} else if (wc->modtype[card] == MOD_TYPE_FXSINIT) {
/* Special case, we initialize the FXS's into the three-byte command mode then
switch to the regular mode. To send it into thee byte mode, treat the path as
6 two-byte commands and in the last one we initialize register 0 to 0x80. All modules
read this as the command to switch to daisy chain mode and we're done. */
- writechunk[CMD_BYTE(card, 0)] = 0x00;
- writechunk[CMD_BYTE(card, 1)] = 0x00;
+ writechunk[CMD_BYTE(card, 0, wc->altcs[card])] = 0x00;
+ writechunk[CMD_BYTE(card, 1, wc->altcs[card])] = 0x00;
if ((card & 0x1) == 0x1)
- writechunk[CMD_BYTE(card, 2)] = 0x80;
+ writechunk[CMD_BYTE(card, 2, wc->altcs[card])] = 0x80;
else
- writechunk[CMD_BYTE(card, 2)] = 0x00;
+ writechunk[CMD_BYTE(card, 2, wc->altcs[card])] = 0x00;
#ifdef VPM_SUPPORT
} else if (wc->modtype[card] == MOD_TYPE_VPM) {
if (curcmd & __CMD_WR)
- writechunk[CMD_BYTE(card, 0)] = ((card & 0x3) << 4) | 0xc | ((curcmd >> 16) & 0x1);
+ writechunk[CMD_BYTE(card, 0, wc->altcs[card])] = ((card & 0x3) << 4) | 0xc | ((curcmd >> 16) & 0x1);
else
- writechunk[CMD_BYTE(card, 0)] = ((card & 0x3) << 4) | 0xa | ((curcmd >> 16) & 0x1);
- writechunk[CMD_BYTE(card, 1)] = (curcmd >> 8) & 0xff;
- writechunk[CMD_BYTE(card, 2)] = curcmd & 0xff;
+ writechunk[CMD_BYTE(card, 0, wc->altcs[card])] = ((card & 0x3) << 4) | 0xa | ((curcmd >> 16) & 0x1);
+ writechunk[CMD_BYTE(card, 1, wc->altcs[card])] = (curcmd >> 8) & 0xff;
+ writechunk[CMD_BYTE(card, 2, wc->altcs[card])] = curcmd & 0xff;
#endif
} else if (wc->modtype[card] == MOD_TYPE_NONE) {
- writechunk[CMD_BYTE(card, 0)] = 0x00;
- writechunk[CMD_BYTE(card, 1)] = 0x00;
- writechunk[CMD_BYTE(card, 2)] = 0x00;
+ writechunk[CMD_BYTE(card, 0, wc->altcs[card])] = 0x00;
+ writechunk[CMD_BYTE(card, 1, wc->altcs[card])] = 0x00;
+ writechunk[CMD_BYTE(card, 2, wc->altcs[card])] = 0x00;
}
#if 0
/* XXX */
@@ -552,7 +561,7 @@
ident = (wc->cmdq[card].cmds[x] >> 24) & 0xff;
if (ident == wc->rxident) {
/* Store result */
- wc->cmdq[card].cmds[x] |= readchunk[CMD_BYTE(card, 2)];
+ wc->cmdq[card].cmds[x] |= readchunk[CMD_BYTE(card, 2, wc->altcs[card])];
wc->cmdq[card].cmds[x] |= __CMD_FIN;
if (wc->cmdq[card].cmds[x] & __CMD_WR) {
/* Go ahead and clear out writes since they need no acknowledgement */
@@ -624,9 +633,10 @@
for (x=0;x<ZT_CHUNKSIZE;x++) {
/* Send a sample, as a 32-bit word */
- for (y=0;y < wc->cards;y++) {
+ for (y=0;y < wc->type;y++) {
if (!x)
cmd_checkisr(wc, y);
+
writechunk[y] = wc->chans[y].writechunk[x];
cmd_dequeue(wc, writechunk, y, x);
}
@@ -877,7 +887,7 @@
cmd_retransmit(wc);
}
}
- for (y=0;y < wc->cards;y++) {
+ for (y=0;y < wc->type;y++) {
wc->chans[y].readchunk[x] = readchunk[y];
cmd_decifer(wc, readchunk, y);
}
@@ -895,7 +905,7 @@
readchunk += (EFRAME_SIZE + EFRAME_GAP);
}
/* XXX We're wasting 8 taps. We should get closer :( */
- for (x=0;x<wc->cards;x++) {
+ for (x=0;x<wc->type;x++) {
if (wc->cardflag & (1 << x))
zt_ec_chunk(&wc->chans[x], wc->chans[x].readchunk, wc->chans[x].writechunk);
}
@@ -1583,7 +1593,7 @@
}
if (vbat < 0xc0) {
- printk("ProSLIC on module %d failed to powerup within %d ms (%d mV only)\n\n -- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM2400P??\n",
+ printk("ProSLIC on module %d failed to powerup within %d ms (%d mV only)\n\n -- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM CARD??\n",
card, (int)(((jiffies - origjiffies) * 1000 / HZ)),
vbat * 375);
return -1;
@@ -2300,7 +2310,7 @@
wc->chans[x].pvt = wc;
}
wc->span.chans = wc->chans;
- wc->span.channels = wc->cards;
+ wc->span.channels = wc->type;
wc->span.hooksig = wctdm_hooksig;
wc->span.open = wctdm_open;
wc->span.close = wctdm_close;
@@ -2353,7 +2363,7 @@
newjiffies = jiffies + HZ/10;
while(((reg = wctdm_getctl(wc,0x0000)) & 0x00000001) && (newjiffies > jiffies));
- printk("WCTDM2400P: New Reg: %08x!\n", reg);
+ printk("%s: New Reg: %08x!\n", wc->variety, reg);
/* Configure watchdogs, access, etc */
@@ -2384,7 +2394,7 @@
printk("(post) Reg fc is %08x\n", reg);
printk("Detected REG2: %08x\n", wctdm_getsdi(wc, 0x02));
#endif
- printk("wctdm2400p: reg is %08x\n", wctdm_getctl(wc, 0x0088));
+ printk("wctdm24xxp: reg is %08x\n", wctdm_getctl(wc, 0x0088));
return 0;
}
@@ -2616,13 +2626,20 @@
for (x=0;x<wc->cards;x++)
wc->modtype[x] = MOD_TYPE_FXS;
spin_unlock_irqrestore(&wc->reglock, flags);
+
#if 0
/* XXX */
cmddesc = 0;
#endif
+ /* Now that all the cards have been reset, we can stop checking them all if there aren't as many */
+ spin_lock_irqsave(&wc->reglock, flags);
+ wc->cards = wc->type;
+ spin_unlock_irqrestore(&wc->reglock, flags);
+
/* Reset modules */
for (x=0;x<wc->cards;x++) {
int sane=0,ret=0,readi=0;
+retry:
/* Init with Auto Calibration */
if (!(ret = wctdm_init_proslic(wc, x, 0, 0, sane))) {
wc->cardflag |= (1 << x);
@@ -2650,8 +2667,25 @@
} else if (!(ret = wctdm_init_voicedaa(wc, x, 0, 0, sane))) {
wc->cardflag |= (1 << x);
printk("Port %d: Installed -- AUTO FXO (%s mode)\n",x + 1, fxo_modes[_opermode].name);
- } else
- printk("Port %d: Not installed\n", x + 1);
+ } else {
+ if ((wc->type == 8) && ((x & 0x3) == 1) && !wc->altcs[x]) {
+ spin_lock_irqsave(&wc->reglock, flags);
+ wc->modtype[x] = MOD_TYPE_FXSINIT;
+ wc->altcs[x] = 2;
+ spin_unlock_irqrestore(&wc->reglock, flags);
+ schluffen(&wc->regq);
+ spin_lock_irqsave(&wc->reglock, flags);
+ wc->modtype[x] = MOD_TYPE_FXS;
+ spin_unlock_irqrestore(&wc->reglock, flags);
+ if (debug)
+ printk("Trying port %d with alternate chip select\n", x + 1);
+ goto retry;
+ } else {
+ printk("Port %d: Not installed\n", x + 1);
+ wc->modtype[x] = MOD_TYPE_NONE;
+ wc->cardflag |= (1 << x);
+ }
+ }
}
}
#ifdef VPM_SUPPORT
@@ -2671,7 +2705,7 @@
int x;
int y;
static int initd_ifaces=0;
-
+
if(initd_ifaces){
memset((void *)ifaces,0,(sizeof(struct wctdm *))*WC_MAX_IFACES);
initd_ifaces=1;
@@ -2694,13 +2728,14 @@
wc->curcard = -1;
wc->cards = NUM_CARDS;
wc->iobase = pci_resource_start(pdev, 0);
+ wc->type = d->ports;
wc->dev = pdev;
wc->pos = x;
wc->variety = d->name;
for (y=0;y<NUM_CARDS;y++)
wc->flags[y] = d->flags;
/* Keep track of whether we need to free the region */
- if (request_region(wc->iobase, 0xff, "wctdm"))
+ if (request_region(wc->iobase, 0xff, "wctdm24xxp"))
wc->freeregion = 1;
/* Allocate enough memory for two zt chunks, receive and transmit. Each sample uses
@@ -2726,7 +2761,7 @@
init_waitqueue_head(&wc->regq);
if (wctdm_initialize(wc)) {
- printk("wctdm: Unable to intialize FXS\n");
+ printk("%s: Unable to register span with zaptel\n", wc->variety);
/* Set Reset Low */
wctdm_stop_dma(wc);
/* Free Resources */
@@ -2744,8 +2779,8 @@
/* Keep track of which device we are */
pci_set_drvdata(pdev, wc);
- if (request_irq(pdev->irq, wctdm_interrupt, SA_SHIRQ, "wctdm24xxp", wc)) {
- printk("wctdm: Unable to request IRQ %d\n", pdev->irq);
+ if (request_irq(pdev->irq, wctdm_interrupt, SA_SHIRQ, wc->variety, wc)) {
+ printk("wctdm24xxp: Unable to request IRQ %d\n", pdev->irq);
if (wc->freeregion)
release_region(wc->iobase, 0xff);
pci_free_consistent(pdev, PCI_WINDOW_SIZE, (void *)wc->writechunk, wc->writedma);
@@ -2783,7 +2818,7 @@
/* Final initialization */
wctdm_post_initialize(wc);
- printk("Found a Wildcard TDM: %s (%d modules)\n", wc->variety, wc->cards);
+ printk("Found a Wildcard TDM: %s (%d modules)\n", wc->variety, wc->type);
res = 0;
} else
res = -ENOMEM;
@@ -2824,7 +2859,8 @@
}
static struct pci_device_id wctdm_pci_tbl[] = {
- { 0xd161, 0x2400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &wctdm },
+ { 0xd161, 0x2400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &wctdm2400 },
+ { 0xd161, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &wctdm800 },
{ 0 }
};
@@ -2909,7 +2945,7 @@
MODULE_PARM(dtmfthreshold, "i");
#endif
#endif
-MODULE_DESCRIPTION("Wildcard TDM2400P Zaptel Driver");
+MODULE_DESCRIPTION("Wildcard TDM2400P/TDM800P Zaptel Driver");
MODULE_AUTHOR("Mark Spencer <markster at digium.com>");
#ifdef MODULE_LICENSE
MODULE_LICENSE("GPL");
Modified: team/mogorman/zaptel-1.2-transcoder/xpp/Makefile
URL: http://svn.digium.com/view/zaptel/team/mogorman/zaptel-1.2-transcoder/xpp/Makefile?view=diff&rev=1990&r1=1989&r2=1990
==============================================================================
--- team/mogorman/zaptel-1.2-transcoder/xpp/Makefile (original)
+++ team/mogorman/zaptel-1.2-transcoder/xpp/Makefile Sat Jan 27 10:20:41 2007
@@ -1,15 +1,33 @@
-EXTRA_CFLAGS = -g3 -I$(SUBDIRS) -DDEBUG -DPOLL_DIGITAL_INPUTS -DWITH_ECHO_SUPPRESSION
+EXTRA_CFLAGS = $(XPP_LOCAL_CFLAGS) \
+ -g3 -I$(SUBDIRS) \
+ -DDEBUG \
+ -DPOLL_DIGITAL_INPUTS \
+ -DWITH_ECHO_SUPPRESSION \
+ -DPROTOCOL_DEBUG \
+ -DZAPTEL_EC_TYPEDEF \
+
+# Useful for Astribank-BRI debugging, and maybe more later on.
+# Requires debugfs support in the kernel.
+# -DXPP_DEBUGFS
+
+DRIVER_DIR = $(SUBDIRS)
obj-m += xpp.o xpd_fxs.o xpd_fxo.o
+
+HAS_BRISTUFF := $(shell cpp $(CPPFLAGS) -dM $(DRIVER_DIR)/zconfig.h | sed -n 's/^.*CONFIG_ZAPATA_BRI_DCHANS/y/p')
# Build only supported modules
ifneq (,$(filter y m,$(CONFIG_USB)))
obj-m += xpp_usb.o
endif
+ifneq (,$(HAS_BRISTUFF))
+obj-m += xpd_bri.o
+endif
xpp-y += xbus-core.o xpp_zap.o xproto.o card_global.o
xpd_fxs-y += card_fxs.o
xpd_fxo-y += card_fxo.o
+xpd_bri-y += card_bri.o
ctags:
ctags *.[ch]
Modified: team/mogorman/zaptel-1.2-transcoder/xpp/README.Astribank
URL: http://svn.digium.com/view/zaptel/team/mogorman/zaptel-1.2-transcoder/xpp/README.Astribank?view=diff&rev=1990&r1=1989&r2=1990
==============================================================================
--- team/mogorman/zaptel-1.2-transcoder/xpp/README.Astribank (original)
+++ team/mogorman/zaptel-1.2-transcoder/xpp/README.Astribank Sat Jan 27 10:20:41 2007
@@ -22,9 +22,10 @@
make -C xpp/utils
-In order to build the user space utilities, you will need the libusb-dev
-package on Debian (and derivatives like ubuntu) or libusb-devel on RedHat
+In order to build the user space utilities, you will need the libusb-dev
+package on Debian (and derivatives like ubuntu) or libusb-devel on RedHat
(and derivatives like Centox/Trixbox).
+
INSTALLATION:
""""""""""""
@@ -130,11 +131,54 @@
this will be the old value + 1.
+Firmware Loading with Hotplug:
+"""""""""""""""""""""""""""""
+The Hotplug framework was popular for hotplugging and usually also
+autoloading drivers. If it is used on your system, you'll see
+/etc/hotplug with many files under it. Hotplug will automatically load
+most relevant USB and PCI kernel modules by the relevant USB and PCI
+IDs. Again: if the framework is in place and the proper configuration
+files are in place, the firmware should be loaded automatically.
+
+In order to get hotplug to autoload the firmware into the Astribank,
+the configuration file xpp_fxloader.usermap and the script xpp_fxloader
+should be copied into /etc/hotplug/usb/ . This is done by 'make -C
+xpp/utils install' .
+
+xpp_fxloader.usermap includes a map of USB IDs and the command to run
+when they are encountered. It instructs hotplug to run the script
+xpp_fxloader from that directory. This is done by 'make -C
+xpp/utils install' .
+
+When xpp_fxloader is run without any parameters it assumes that it was
+run by the hotplug scripts. It will then check if the even is an "add"
+event (and not a "remove" event), and if so, install the required
+firmware file. It will be called twice, as after the load of the USB
+firmware the device will reenumerate itself and thus "unplug" and
+"replug" to load the FPGA firmware.
+
+
Firmware Loading with UDEV:
""""""""""""""""""""""""""
-Firmware loading with udev should work but is not installed
-automatically, yet. See the comments in the beginning of the script
-/etc/hotplug/usb/xpp_fxloader .
+The UDEV framework has replaced Hotplug in most recent systems. If you
+have a recent 2.6 system with no Hotplug and files under /etc/udev,
+chances are you ude udev. udev does quite a few nice things.
+Again: if the framework is in place and the proper configuration
+files are in place, the firmware should be loaded automatically.
+
+In order to get hotplug to autoload the firmware into the Astribank,
+the configuration file xpp.rules should be copied into /etc/udev/rules.d
+and the script xpp_fxloader should be copied into /etc/hotplug/usb/ .
+This is done by 'make -C xpp/utils install' .
+
+xpp.rules instructs udevd to run xpp_fxloader with the option udev and
+the USB ID when an Astribank is plugged and needs loading firmware.
+When xpp_fxloader is run with the option udev it assumes that it was
+run by udevd scripts. It will then install the required firmware file.
+It will be called twice, as after the load of the USB firmware the
+device will reenumerate itself and thus "unplug" and "replug" to load
+the FPGA firmware.
+
Loading The Modules:
"""""""""""""""""""
@@ -301,6 +345,47 @@
13 XPP_IN/0-12 FXOKS (In use)
14 XPP_IN/0-13 FXOKS (In use)
+Sample dialplan (extentions.conf) for all the above:
+
+[phones-zap]
+; 401 will dial to channel 1, 420, to zaptel channel 20, etc.
+exten => _4XX,1,Dial(ZAP/${EXTEN:1})
+
+[trunk-9]
+; Dial through the first FXO port availble.
+; This assumes that all FXO ports are in group 0 and all others are not,
+; as in the sample zapata.conf for 8FXS/8FXO below, and as is generated
+; by genzaptelconf by default.
+exten => 9.,Dial(Zap/g0/${EXTEN:1})
+
+[from-internal]
+; The context of FXS ports: analog phones.
+; They are allowed to dial to all other phones
+include => phones-zap
+; They are also allowed to call through the trunk:
+include => trunk-9
+
+[from-pstn]
+; Calls from the PSTN enter here. Redirect calls to an IVR
+; or a default extension in the s context here. In this case we
+; redirect calls to Zaptel channel 1:
+exten => s,1,Dial(Zap/1)
+
+[astribank-inputs]
+exten => s,1,Set(ZAP_CHAN=Cut(${CHANNEL},-,1))
+exten => s,n,Set(ZAP_CHAN=Cut(${ZAP_CHAN},/,2))
+; 11 is the number of the first input port. At least in the sample
+; configuration below.
+exten => s,n,Set(INPUT_NUM=Math(${ZAP_CHAN}-11))
+; The sample below just logs the signal.
+exten => s,n,NoOp(Got signal from input port number ${INPUT_NUM})
+; Alternatively:
+;exten => s,n,System(run something)
+
+; No. We did not forget the context astribank-outputs. Output
+; ports only get calls from the PBX. Thus they don't need a context
+; of their own.
+
/proc Interface
"""""""""""""""
Modified: team/mogorman/zaptel-1.2-transcoder/xpp/card_fxo.c
URL: http://svn.digium.com/view/zaptel/team/mogorman/zaptel-1.2-transcoder/xpp/card_fxo.c?view=diff&rev=1990&r1=1989&r2=1990
==============================================================================
--- team/mogorman/zaptel-1.2-transcoder/xpp/card_fxo.c (original)
+++ team/mogorman/zaptel-1.2-transcoder/xpp/card_fxo.c Sat Jan 27 10:20:41 2007
@@ -29,6 +29,7 @@
#include "xpp_zap.h"
#include "card_fxo.h"
#include "zap_debug.h"
+#include "xbus-core.h"
static const char rcsid[] = "$Id$";
@@ -65,7 +66,6 @@
/*---------------- FXO Protocol Commands ----------------------------------*/
static /* 0x0F */ DECLARE_CMD(FXO, XPD_STATE, bool on);
-static /* 0x0F */ DECLARE_CMD(FXO, CHAN_CID, lineno_t chan);
static /* 0x0F */ DECLARE_CMD(FXO, RING, lineno_t chan, bool on);
static /* 0x0F */ DECLARE_CMD(FXO, RELAY_OUT, byte which, bool on);
@@ -152,7 +152,7 @@
for_each_line(xpd, i) {
if(IS_SET(xpd->digital_outputs, i) || IS_SET(xpd->digital_inputs, i))
continue;
- if(IS_BLINKING(priv,i,color)) {
+ if(xpd->blink_mode || IS_BLINKING(priv,i,color)) {
// led state is toggled
if((timer_count % LED_BLINK_PERIOD) == 0) {
DBG("%s/%s/%d: ledstate=%s\n", xpd->xbus->busname, xpd->xpdname, i,
@@ -421,46 +421,41 @@
/* FIXME: based on data from from wctdm.h */
#include <wctdm.h>
-static const int echotune_reg[] = {30,45,46,47,58,49,50,51,52};
-union echotune {
- /* "coeff 0" is acim */
- unsigned char coeff[sizeof(echotune_reg)];
- struct wctdm_echo_coefs wctdm_struct;
-};
+/*
+ * The first register is the ACIM, the other are coefficient registers.
+ * We define the array size explicitly to track possible inconsistencies
+ * if the struct is modified.
+ */
+static const char echotune_regs[sizeof(struct wctdm_echo_coefs)] = {30, 45, 46, 47, 48, 49, 50, 51, 52};
static int FXO_card_ioctl(xpd_t *xpd, int pos, unsigned int cmd, unsigned long arg)
{
- union echotune echoregs;
- int i,ret;
-
- BUG_ON(!xpd);
- DBG("cmd: 0x%X, expecting: 0x%X, pos=%d.\n", cmd, WCTDM_SET_ECHOTUNE, pos);
+ int i,ret;
+ unsigned char echotune_data[ARRAY_SIZE(echotune_regs)];
+
+ BUG_ON(!xpd);
switch (cmd) {
case WCTDM_SET_ECHOTUNE:
DBG("-- Setting echo registers: \n");
/* first off: check if this span is fxs. If not: -EINVALID */
- if (copy_from_user(&echoregs.wctdm_struct,
- (struct wctdm_echo_coefs __user *)arg, sizeof(echoregs.wctdm_struct)))
+ if (copy_from_user(&echotune_data, (void __user *)arg, sizeof(echotune_data)))
return -EFAULT;
- /* Set the ACIM register */
- /* quick and dirty registers writing: */
- for (i=0; i<sizeof(echotune_reg); i++) {
- char buf[22];
- sprintf(buf, "%d WD %2X %2X",
- pos,echotune_reg[i],echoregs.coeff[i]
- );
- /* FIXME: code duplicated from proc_xpd_register_write */
- ret = handle_register_command(xpd, buf);
- if(ret < 0)
+ for (i = 0; i < ARRAY_SIZE(echotune_regs); i++) {
+ DBG("Reg=0x%02X, data=0x%02X\n", echotune_regs[i], echotune_data[i]);
+ ret = DAA_DIRECT_REQUEST(xpd->xbus, xpd, pos, DAA_WRITE, echotune_regs[i], echotune_data[i]);
+ if (ret < 0) {
+ NOTICE("%s/%s/%d: Couldn't write %0x02X to register %0x02X\n",
+ xpd->xbus->busname, xpd->xpdname, pos, echotune_data[i], echotune_regs[i]);
return ret;
+ }
msleep(1);
}
DBG("-- Set echo registers successfully\n");
-
break;
default:
+ DBG("%s/%s/%d: Unknown command 0x%X.\n", xpd->xbus->busname, xpd->xpdname, pos, cmd);
return -ENOTTY;
}
return 0;
@@ -471,6 +466,7 @@
/* 0x0F */ HOSTCMD(FXO, REGISTER_REQUEST, byte chipsel, bool writing, bool do_subreg, byte regnum, byte subreg, byte data_low, byte data_high)
{
int ret = 0;
+ xframe_t *xframe;
xpacket_t *pack;
reg_cmd_t *reg_cmd;
@@ -478,7 +474,7 @@
DBG("NO XBUS\n");
return -EINVAL;
}
- XPACKET_NEW(pack, xbus, GLOBAL, REGISTER_REQUEST, xpd->id);
+ XFRAME_NEW(xframe, pack, xbus, GLOBAL, REGISTER_REQUEST, xpd->id);
#if 0
DBG("%s/%s/%d: %c%c R%02X S%02X %02X %02X\n",
xbus->busname, xpd->xpdname, chipsel,
@@ -487,7 +483,6 @@
regnum, subreg, data_low, data_high);
#endif
reg_cmd = &RPACKET_FIELD(pack, GLOBAL, REGISTER_REQUEST, reg_cmd);
- pack->datalen = sizeof(*reg_cmd);
reg_cmd->bytes = sizeof(*reg_cmd) - 1; // do not count the 'bytes' field
REG_FIELD(reg_cmd, chipsel) = chipsel;
REG_FIELD(reg_cmd, read_request) = (writing) ? 0 : 1;
@@ -496,7 +491,7 @@
REG_FIELD(reg_cmd, subreg) = subreg;
REG_FIELD(reg_cmd, data_low) = data_low;
REG_FIELD(reg_cmd, data_high) = data_high;
- ret = packet_send(xbus, pack);
+ ret = xframe_send(xbus, xframe);
return ret;
}
@@ -521,17 +516,6 @@
return ret;
}
-static /* 0x0F */ HOSTCMD(FXO, CHAN_CID, lineno_t chan)
-{
- int ret = 0;
-
- BUG_ON(!xbus);
- BUG_ON(!xpd);
- DBG("%s/%s/%d:\n", xbus->busname, xpd->xpdname, chan);
- return ret;
-}
-
-
static /* 0x0F */ HOSTCMD(FXO, RING, lineno_t chan, bool on)
{
BUG_ON(!xbus);
@@ -557,7 +541,7 @@
if(!xpd) {
NOTICE("%s: received %s for non-existing xpd: %d\n",
- __FUNCTION__, cmd->name, XPD_NUM(pack->content.addr));
+ __FUNCTION__, cmd->name, XPD_NUM(pack->addr));
return -EPROTO;
}
priv = xpd->priv;
@@ -567,9 +551,10 @@
for_each_line(xpd, i) {
if(IS_SET(sig_toggles, i)) {
if(!IS_SET(priv->battery, i)) {
- DBG("%s/%s/%d: battery is off. ignore false alarm.\n",
+ DBG("%s/%s/%d: SIG_CHANGED while battery is off.\n",
xbus->busname, xpd->xpdname, i);
- continue;
+ // FIXME: allow dialing without battery polling...
+ // continue;
}
mark_ring(xpd, i, IS_SET(sig_status, i), 1);
}
@@ -587,7 +572,7 @@
if(!xpd) {
NOTICE("%s: received %s for non-existing xpd: %d\n",
- __FUNCTION__, cmd->name, XPD_NUM(pack->content.addr));
+ __FUNCTION__, cmd->name, XPD_NUM(pack->addr));
return -EPROTO;
}
spin_lock_irqsave(&xpd->lock, flags);
@@ -658,10 +643,8 @@
.RING = XPROTO_CALLER(FXO, RING),
.RELAY_OUT = XPROTO_CALLER(FXO, RELAY_OUT),
.XPD_STATE = XPROTO_CALLER(FXO, XPD_STATE),
- .CHAN_CID = XPROTO_CALLER(FXO, CHAN_CID),
.SYNC_SOURCE = XPROTO_CALLER(GLOBAL, SYNC_SOURCE),
- .PCM_WRITE = XPROTO_CALLER(GLOBAL, PCM_WRITE),
},
.packet_is_valid = fxo_packet_is_valid,
.packet_dump = fxo_packet_dump,
@@ -672,7 +655,7 @@
const xproto_entry_t *xe;
//DBG("\n");
- xe = xproto_card_entry(&PROTO_TABLE(FXO), pack->content.opcode);
+ xe = xproto_card_entry(&PROTO_TABLE(FXO), pack->opcode);
return xe != NULL;
}
@@ -896,7 +879,7 @@
int __init card_fxo_startup(void)
{
- INFO("%s\n", THIS_MODULE->name);
+ INFO("%s revision %s\n", THIS_MODULE->name, XPP_VERSION);
xproto_register(&PROTO_TABLE(FXO));
return 0;
}
@@ -909,6 +892,7 @@
MODULE_DESCRIPTION("XPP FXO Card Driver");
MODULE_AUTHOR("Oron Peled <oron at actcom.co.il>");
MODULE_LICENSE("GPL");
+MODULE_VERSION(XPP_VERSION);
MODULE_ALIAS_XPD(XPD_TYPE_FXO);
module_init(card_fxo_startup);
Modified: team/mogorman/zaptel-1.2-transcoder/xpp/card_fxs.c
URL: http://svn.digium.com/view/zaptel/team/mogorman/zaptel-1.2-transcoder/xpp/card_fxs.c?view=diff&rev=1990&r1=1989&r2=1990
==============================================================================
--- team/mogorman/zaptel-1.2-transcoder/xpp/card_fxs.c (original)
+++ team/mogorman/zaptel-1.2-transcoder/xpp/card_fxs.c Sat Jan 27 10:20:41 2007
@@ -29,6 +29,7 @@
#include "xpp_zap.h"
#include "card_fxo.h"
#include "zap_debug.h"
+#include "xbus-core.h"
static const char rcsid[] = "$Id$";
@@ -64,14 +65,13 @@
#define SLIC_DIRECT_REQUEST(xbus,xpd,chipsel,writing,reg,dL) \
CALL_PROTO(FXS, REGISTER_REQUEST, (xbus), (xpd), (chipsel), (writing), 0, (reg), 0, (dL), 0)
#define SLIC_INDIRECT_REQUEST(xbus,xpd,chipsel,writing,reg,dL,dH) \
- PROTO(FXS, REGISTER_REQUEST, (xbus), (xpd), (chipsel), (writing), 1, (reg), 0, (dL), (dH))
+ CALL_PROTO(FXS, REGISTER_REQUEST, (xbus), (xpd), (chipsel), (writing), 1, 0x1E, (reg), (dL), (dH))
#define VALID_CHIPSEL(x) (((chipsel) >= 0 && (chipsel) <= 7) || (chipsel) == ALL_CHANS)
/*---------------- FXS Protocol Commands ----------------------------------*/
static /* 0x0F */ DECLARE_CMD(FXS, XPD_STATE, bool on);
-static /* 0x0F */ DECLARE_CMD(FXS, CHAN_CID, lineno_t chan);
static /* 0x0F */ DECLARE_CMD(FXS, RING, lineno_t chan, bool on);
static /* 0x0F */ DECLARE_CMD(FXS, RELAY_OUT, byte which, bool on);
@@ -80,6 +80,7 @@
static int proc_fxs_info_read(char *page, char **start, off_t off, int count, int *eof, void *data);
static int proc_xpd_register_read(char *page, char **start, off_t off, int count, int *eof, void *data);
static int proc_xpd_register_write(struct file *file, const char __user *buffer, unsigned long count, void *data);
+static void start_stop_vm_led(xbus_t *xbus, xpd_t *xpd, lineno_t pos);
#define PROC_REGISTER_FNAME "slics"
#define PROC_FXS_INFO_FNAME "fxs_info"
@@ -89,6 +90,8 @@
struct proc_dir_entry *fxs_info;
xpp_line_t ledstate[NUM_LEDS]; /* 0 - OFF, 1 - ON */
xpp_line_t ledcontrol[NUM_LEDS]; /* 0 - OFF, 1 - ON */
+ xpp_line_t found_fsk_pattern;
+ xpp_line_t msg_waiting;
int blinking[NUM_LEDS][CHANNELS_PERXPD];
};
@@ -137,7 +140,7 @@
/*
* pos can be:
* - A line number
- * - ALL_LINES
+ * - ALL_LINES. This is not valid anymore since 8-Jan-2007.
*/
static int do_led(xpd_t *xpd, lineno_t chan, byte which, bool on)
{
@@ -147,6 +150,7 @@
xbus_t *xbus;
BUG_ON(!xpd);
+ BUG_ON(chan == ALL_LINES);
xbus = xpd->xbus;
priv = xpd->priv;
which = which % NUM_LEDS;
@@ -186,7 +190,7 @@
for_each_line(xpd, i) {
if(IS_SET(xpd->digital_outputs, i) || IS_SET(xpd->digital_inputs, i))
continue;
- if(IS_BLINKING(priv, i, color)) { // Blinking
+ if(xpd->blink_mode || IS_BLINKING(priv, i, color)) { // Blinking
// led state is toggled
if((timer_count % LED_BLINK_PERIOD) == 0) {
DBG("%s/%s/%d ledstate=%s\n", xpd->xbus->busname, xpd->xpdname, i,
@@ -206,6 +210,21 @@
}
}
}
+
+static int do_callerid(xbus_t *xbus, xpd_t *xpd, lineno_t chan)
+{
+ int ret = 0;
+ int i;
+
+ BUG_ON(!xbus);
+ BUG_ON(!xpd);
+ DBG("%s/%s/%d:\n", xbus->busname, xpd->xpdname, chan);
+ ret = SLIC_DIRECT_REQUEST(xbus, xpd, chan, SLIC_WRITE, 0x40, FXS_LINE_CID);
+ for_each_line(xpd, i)
+ xpd->lasttxhook[i] = FXS_LINE_CID;
+ return ret;
+}
+
/*---------------- FXS: Methods -------------------------------------------*/
@@ -337,9 +356,11 @@
cur_chan->pvt = xpd;
cur_chan->sigcap = FXS_DEFAULT_SIGCAP;
}
- spin_lock_irqsave(&xpd->lock, flags);
- do_led(xpd, ALL_LINES, color, LED_OFF);
- spin_unlock_irqrestore(&xpd->lock, flags);
+ for_each_line(xpd, i) {
+ spin_lock_irqsave(&xpd->lock, flags);
+ do_led(xpd, i, color, LED_OFF);
+ spin_unlock_irqrestore(&xpd->lock, flags);
+ }
for_each_line(xpd, i) {
MARK_LED(priv, i, color, LED_ON);
msleep(50);
@@ -387,6 +408,8 @@
return ret;
}
ret = CALL_XMETHOD(RING, xbus, xpd, pos, 0); // RING off
+ if (!IS_SET(xpd->offhook, pos))
+ start_stop_vm_led(xbus, xpd, pos);
#if 0
switch(chan->sig) {
case ZT_SIG_EM:
@@ -403,7 +426,7 @@
case ZT_TXSIG_OFFHOOK:
if(xpd->ringing[pos]) {
BIT_SET(xpd->cid_on, pos);
- ret = CALL_XMETHOD(CHAN_CID, xpd->xbus, xpd, pos); // CALLER ID
+ ret = do_callerid(xpd->xbus, xpd, pos); // CALLER ID
}
xpd->ringing[pos] = 0;
#if 0
@@ -438,6 +461,107 @@
return ret;
}
+#ifdef VMWI_IOCTL
+/*
+ * Private ioctl()
+ * We don't need it now, since we detect vmwi via FSK patterns
+ */
+static int FXS_card_ioctl(xpd_t *xpd, int pos, unsigned int cmd, unsigned long arg)
+{
+ struct FXS_priv_data *priv;
+ xbus_t *xbus;
+
+ BUG_ON(!xpd);
+ priv = xpd->priv;
+ BUG_ON(!priv);
+ xbus = xpd->xbus;
+ BUG_ON(!xbus);
+
+ if (pos < 0 || pos >= xpd->channels) {
+ NOTICE("%s/%s: Bad channel number %d in %s(), cmd=%u\n", xbus->busname, xpd->xpdname, pos, __FUNCTION__, cmd);
+ return -EINVAL;
+ }
+
+ switch (cmd) {
+ case _IOW(ZT_CODE, 60, int): /* message-waiting led control */
+ /* Digital inputs/outputs don't have VM leds */
+ if (IS_SET(xpd->digital_inputs | xpd->digital_outputs, pos))
+ return 0;
+ if (arg)
+ BIT_SET(priv->msg_waiting, pos);
+ else
+ BIT_CLR(priv->msg_waiting, pos);
+ return 0;
+ }
+ return -ENOTTY;
+}
+#endif
+
+static int set_vm_led_mode(xbus_t *xbus, xpd_t *xpd, int pos, int on)
+{
+ int ret = 0;
+ BUG_ON(!xbus);
+ BUG_ON(!xpd);
+
+ if (on) {
+ /* A write to register 0x40 will now turn on/off the VM led */
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x16, 0xE8, 0x03);
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x15, 0xEF, 0x7B);
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x14, 0x9F, 0x00);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x22, 0x19);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x4A, 0x34);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x30, 0xE0);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x31, 0x01);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x32, 0xF0);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x33, 0x05);
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x1D, 0x00, 0x46);
+ } else {
+ /* A write to register 0x40 will now turn on/off the ringer */
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x16, 0x00, 0x00);
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x15, 0x60, 0x01);
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x14, 0xF0, 0x7E);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x22, 0x00);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x4A, 0x34);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x30, 0x00);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x31, 0x00);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x32, 0x00);
+ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x33, 0x00);
+ ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x1D, 0x00, 0x36);
+ }
+
+ return (ret ? -EPROTO : 0);
+}
+
+static void start_stop_vm_led(xbus_t *xbus, xpd_t *xpd, lineno_t pos)
+{
+ bool on;
+
+ if (IS_SET(xpd->digital_outputs | xpd->digital_inputs, pos))
+ return;
+ on = IS_SET(((struct FXS_priv_data *)xpd->priv)->msg_waiting, pos);
+ DBG("%s/%s/%d %s\n", xbus->busname, xpd->xpdname, pos, (on)?"ON":"OFF");
+ set_vm_led_mode(xbus, xpd, pos, on);
[... 6498 lines stripped ...]
More information about the svn-commits
mailing list