[svn-commits] tzafrir: branch 1.4 r3565 - in /branches/1.4: ./ xpp/README.Astribank
SVN commits to the Digium repositories
svn-commits at lists.digium.com
Thu Dec 27 14:21:36 CST 2007
Author: tzafrir
Date: Thu Dec 27 14:21:36 2007
New Revision: 3565
URL: http://svn.digium.com/view/zaptel?view=rev&rev=3565
Log:
Update documentation. Mainly regarding the PRI module.
Merged revisions 3564 via svnmerge from
http://svn.digium.com/svn/zaptel/branches/1.2
Modified:
branches/1.4/ (props changed)
branches/1.4/xpp/README.Astribank
Propchange: branches/1.4/
------------------------------------------------------------------------------
Binary property 'branch-1.2-merged' - no diff available.
Modified: branches/1.4/xpp/README.Astribank
URL: http://svn.digium.com/view/zaptel/branches/1.4/xpp/README.Astribank?view=diff&rev=3565&r1=3564&r2=3565
==============================================================================
--- branches/1.4/xpp/README.Astribank (original)
+++ branches/1.4/xpp/README.Astribank Thu Dec 27 14:21:36 2007
@@ -34,6 +34,42 @@
make -C xpp/utils install
Though this should be done automatically on zaptel >= 1.4.1 .
+
+PRI Port Setup
+~~~~~~~~~~~~~~
+A port in the PRI module can be either E1 (default) or T1. It can also be
+either "TE" or "NT".
+
+TE::
+ Use the bottom port (green LED) and don't invert any wiring. Hint to
+ higher layers that this will be the TE (CPE) side of the connection.
+ This is the default setup.
+
+NT::
+ Use the top port (orange LED) and invert wiring (this is done to allow
+ connecting an NT port and a TE port using a standard straight 8 wires
+ "ethernet" cable). Hint to higher layers that this will be the NT (Net)
+ side of the connection.
+
+The value XPP_PRI_SETUP in the init configuration file (see example
+below) can be used to change those defaults. This value is a
+whitelist-separated list of conditions. When a port is initialized it
+checks those conditions and uses the firs one that matches.
+
+Match expressions may be:
+- CONNECTOR/usb..../XPD-nn To identify by physical connector
+- NUM/XBUS-mm/XPD-nn To identify by bus number
+
+Match expressions may contain "wildcards":
+- * matches zero or more characters.
+- ? matches one charater
+- [xyz] - any of 'x', 'y', or 'z'.
+
+For each line you should define both if it is E1 or T1 and if it is NT
+or TE.
+
+The list implicitly contains an 'NUM/*=TE,E1' catch all default, appended
+to its end.
Sample Configurations
@@ -57,7 +93,7 @@
# A two-letter country code. genzaptelconf uses it to better guess
# the configuration it generates. E.g: the signalling of E1 spans, and
# a few other country-specific settings.
-lc_country=us
+#lc_country=us
# See genzaptelconf(8) and the script itself for a longer list of
# variables.
@@ -65,7 +101,6 @@
# Equivalent to the parameter opermode to the module wctdm: country-specific
# settings to the FXO lines. For a complete list of possible values, see
# /usr/share/zaptel/init_fxo_mode .
-#opermode=FCC
#opermode=FRANCE
# xpp_sync runs with the value of 'XPP_SYNC' as its parameter to set the
@@ -82,29 +117,13 @@
# or removed.
#ASTRIBANK_HOOK_DISABLED=yes
-# Setup for XPP PRI. This allows to have fixed settings:
-# 1. The variable XPP_PRI_SETUP contains a whitespace separated list of
-# port specifications.
-# 2. Each port specification contains a match expression, a '=' and
-# a setting string.
-# 2. Match expressions may be:
-# - CONNECTOR/usb..../XPD-nn To identify by physical connector
-# - NUM/XBUS-mm/XPD-nn To identify by bus number
-# 4. Match expressions may contain "wildcards" (which are translated
-# internally to regular expressions):
-# * matches zero or more characters.
-# ? matches one charater
-# 5. The list of matches is scanned from beginning to end. First match wins.
-# 6. The list implicitly contains an 'NUM/*=TE,E1' catch all default, appended
-# to its end.
-# 7. The setting string is composed of comma separated settings. Valid
-# settings are:
-# - NT or TE
-# - E1 or T1 or J1
-#
+# Setup for the Astribank PRI module:
+# All the ports in the unit connected to the USB port 0000:00:1d.7-1
+# will be NT and E1. Ports no. 1 and 3 of all the other Astribanks will
+# be NT and E1 (and thus ports 0 and 2 will be TE and E1).
#XPP_PRI_SETUP='
# CONNECTOR/usb-0000:00:1d.7-1/XPD-01=NT,E1
-# NUM/*/XPD-03=NT,E1
+# NUM/*/XPD-0[13]=NT,E1
# '
-----------------------------------------------------------
@@ -134,14 +153,32 @@
span=2,0,1,ccs,ami
span=3,2,1,ccs,ami
span=4,0,1,ccs,ami
- bchan=1-2
- dchan=3
- bchan=4-5
- dchan=6
- bchan=7-8
- dchan=9
- bchan=10-11
- dchan=12
+ bchan=1-2,4-5,7-8,10-11
+ dchan=3,6,9,12
+
+Astribank 4 PRI E1
+^^^^^^^^^^^^^^^^^^
+ # Assumed ports settings:
+ # Ports 1,3: TE (CPE)
+ # Ports 2,4: NT (Net)
+ span=1,1,1,ccs,hdb3,crc4
+ span=2,0,1,ccs,hdb3,crc4
+ span=3,2,1,ccs,hdb3,crc4
+ span=4,0,1,ccs,hdb3,crc4
+ bchan=1-15,17-30,31-45,47-60,61-75,77-90,91-105,107-120
+ dchan=16,46,76,106
+
+Astribank 4 PRI T1
+^^^^^^^^^^^^^^^^^^
+ # Assumed ports settings:
+ # Ports 1,3: TE (CPE)
+ # Ports 2,4: NT (Net)
+ span=1,1,1,esf,b8zs
+ span=2,0,1,esf,b8zs
+ span=3,2,1,esf,b8zs
+ span=4,0,1,esf,b8zs
+ bchan=1-23,25-47,49-71,73-95
+ dchan=24,48,72,96
/etc/asterisk/zapata.conf
@@ -247,13 +284,69 @@
group = 2,14
channel => 10,11
+Astribank 4 PRI E1
+^^^^^^^^^^^^^^^^^^
+ ; Assumed ports settings:
+ ; Ports 1,3: TE
+ ; Ports 2,4: NT
+ [channels]
+ switchtype = euroisdn
+ callerid = asreceived
+
+ ; TE ports:
+ signalling = pri_cpe
+ context = from-pstn
+ group = 1,11
+ channel => 1-15,17-30
+
+ group = 1,13
+ channel => 61-75,77-90
+
+ ; NT ports:
+ signalling = bri_net_ptmp
+ ;signalling = bri_net
+ context = from-internal
+ group = 2,12
+ channel => 31-45,47-60
+
+ group = 2,14
+ channel => 91-105,107-120
+
+Astribank 4 PRI T1
+^^^^^^^^^^^^^^^^^^
+ ; Assumed ports settings:
+ ; Ports 1,3: TE
+ ; Ports 2,4: NT
+ [channels]
+ switchtype = national
+ callerid = asreceived
+
+ ; TE ports:
+ signalling = pri_cpe
+ context = from-pstn
+ group = 1,11
+ channel => 1-23
+
+ group = 1,13
+ channel => 49-71
+
+ ; NT ports:
+ signalling = bri_net_ptmp
+ ;signalling = bri_net
+ context = from-internal
+ group = 2,12
+ channel => 25-47
+
+ group = 2,14
+ channel => 73-95
+
Please check, that the mailbox and callerid parameters generated by
genzaptelconf are good for you and change them if necessary.
-If you have Astribank device with 8 FXS and 8FXO ports connected and set up, then
-the Zaptel channels will be allocated as the following:
+If you have Astribank device with 8 FXS and 8FXO ports connected and set
+up, then the Zaptel channels will be allocated as the following:
root at rapid:~# cat /proc/zaptel/*
Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: FXS"
@@ -357,6 +450,8 @@
; of their own. Sending them to a context of their on makes
; 'zap show channels' in the CLI provide useful display, though.
-----------------------------------------------------------
+
+
Troubleshhoting
@@ -935,6 +1030,13 @@
"ethernet" cable). Hint to higher layers that this will be the NT side
of the connection.
+LOCALOOP::
+ Set the device into local loop mode: loops the transmitted channels
+ directly into the recieved channels.
+
+NOLOCALLOOP::
+ Ends local loop mode.
+
Normally those are set by the PRI initialization script . See the
definition of XPP_PRI_SETUP in xref:sect-default[the sample Zaptel init
configuration file] .
More information about the svn-commits
mailing list